April Bestsellers

Occidental Leather 1546 Features

• Ultra-light industrial nylon construction with padded shoulders
• Even weight distribution for improved comfort
• Chest-height pockets for pencils or clip-on items
• Heavy duty spring clips for quick on/off
• Leather loop attachment system fits up to 3 inch tool belts
• Made in USA

Occidental Leather 1546 Applications

• Support and balance heavy tool belt loads
• Reduce back and hip strain during prolonged wear
• Hold small items at chest height for quick access
• Integrate with tool belts up to 3 inches wide
• Jobsite use for carpenters, electricians, and general trades

Occidental Leather 1546 Installation Overview

1. Slide your tool belt through the leather loop attachments.
2. Secure the heavy duty spring clips.
3. Adjust shoulder straps and back/front buckles for fit.
4. Fasten the chest strap.
5. Load tools and confirm balanced weight distribution.

Occidental Leather 5590M Key Features

• Hand-specific layout promotes efficient workflow
• NoSpill leather holders for secure, form-fit tool retention
• 37 pockets and holders for full jobsite loadouts
• Rugged leather build with select industrial nylon components
• Made in USA

Occidental Leather 5590M Applications

• Commercial electrical installation and service
• Tool and fastener organization on the jobsite
• Journeyman-level daily use
• General maintenance and troubleshooting

Occidental Leather 5590M Installation Overview

1. Measure from belt buckle end to the hole you use on your current tool belt.
2. Select the medium size if your measurement aligns with 37 in midpoint.
3. Position tool bags for hand-specific workflow.
4. Secure hammer holder and accessories to the belt.
5. Load tools and adjust fit for comfort.

Occidental Leather 5055 Features

• Even load distribution for reduced hip and back fatigue
• Padded, contoured yoke lined with Dri-Lex for moisture wicking
• Chest pockets for pencils and clip-on items on both sides
• Easy on-off with adjustable chest strap
• Heavy-duty D-ring for hanging the rig
• One size fits most
• Made in USA

Occidental Leather 5055 Applications

• Support and stabilize loaded tool belts during long shifts
• Improve comfort and reduce strain for framing and carpentry work
• Keep suspenders and straps securely positioned while moving
• Hang up belt rig between tasks using center D-ring

Occidental Leather 5055 Installation Overview

1. Attach the leather loop connectors to your work belt (up to 3 in).
2. Clip the suspender straps to the belt loops.
3. Adjust the chest strap for a secure, comfortable fit.
4. Set strap lengths to distribute weight evenly across shoulders.
5. Confirm all connections are secure; D-ring is for hanging only.

Occidental Leather 5002 M Features

• Premium 12-14 oz bridle leather, custom tanned in the USA
• Edge stitched for durability and clean look
• Heavy duty 2 in steel roller buckle with nickel finish
• Slim 2 in width for compact tool bag setups
• Made in the USA

Occidental Leather 5002 M Applications

• Base belt for tool rigs and pouch systems
• Replacement belt for Occidental Leather setups
• Low profile carry for compact tool bags
• General jobsite wear requiring a durable work belt

Occidental Leather 5002 M Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the most used hole.
2. Select the size closest to that midpoint measurement.
3. If no belt to measure, add 4 in to pant waist for approximate midpoint.
4. Thread the buckle and secure at the midpoint hole; adjust as needed.

Occidental Leather 2003 Features

• Clip-on convenience for bags or pockets
• Protects tools, bags, and body from sharp edges
• Holds a chisel, knife, diagonal cutter; plus one round pencil
• Lightweight, compact, and jobsite-ready
• Made in the USA

Occidental Leather 2003 Applications

• Safe storage of sharp edge tools on the belt or in bags
• Protecting tool pouches and clothing from blade damage
• Keeping a round pencil handy alongside primary tool
• Organizing chisels, knives, and cutters for quick access

Occidental Leather 2003 Installation Overview

1. Attach the shield by clipping it to a tool bag edge or pocket.
2. Insert the primary tool into the main compartment.
3. Place a round pencil in the dedicated side slot.
4. Ensure the clip is fully seated and the tool is secure before use.

Occidental Leather 5191 M Features

• Unique one-piece toolbelt assembly for balanced load
• Premium top-grain leather construction
• Sheepskin-lined interior for comfort
• Hand-specific tool holders with NoSpill system
• Copper-riveted main bags for durability
• Function-engineered layout based on 5060 and 5018 bags
• Made in USA

Occidental Leather 5191 M Applications

• Framing and general carpentry tool organization
• Remodeling projects requiring quick tool access
• Finish and trim work with hand-specific layout
• Jobsite setups needing secure, no-spill holders
• Daily professional use in demanding outdoor conditions

Occidental Leather 5191 M Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove and lay belt flat; measure from buckle end to the used hole.
3. Match measurement to size chart; select Medium if midpoint is 37 in.
4. Adjust fit using the midpoint hole with 4 in range each way.

Occidental Leather 5328 Key Features

• Made in the USA
• 10 oz Latigo belting leather construction
• Heavy-duty spring steel belt clip
• Italian-style drop clasp
• Clips to belts up to 2 inches wide
• Sized for larger smartphones (iPhone Plus and similar)

Occidental Leather 5328 Applications

• Keep smartphones secure and accessible on the jobsite
• Belt-mounted carry for larger phones
• Protection from bumps, dust, and debris
• Everyday use for trades and field work

Occidental Leather 5328 Installation Overview

1. Attach the holster by clipping it to a belt up to 2 inches wide.
2. Place the phone inside the holster.
3. Close the drop clasp to secure the phone.
4. Check that the clip is fully engaged before use.

Occidental Leather 5520 Key Features

• 5-in-1 functionality — organize hammer, pliers, pencil, crayon or screwdriver, and a sharp tool
• Removable Oxy Tool Shield protects chisels, knives, and other sharp edges
• Full-grain American leather for long service life
• Space-efficient footprint on your belt
• Slides onto work belts up to 3 inches wide
• Made in the USA

Occidental Leather 5520 Applications

• Framing and general carpentry hand tool carry
• Electrical trim and service work
• Punch list and maintenance tasks
• Everyday belt carry for essential hand tools

Occidental Leather 5520 Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position for preferred hand access on your belt system.
3. Load hammer, pliers, pencil, and crayon or screwdriver into the dedicated sleeves.
4. Insert chisels or knives into the removable Oxy Tool Shield.
5. Check fasteners and leather for secure fit before use.

Occidental Leather B5055 Features

• Even load distribution to relieve hip and lower back strain
• Padded, contoured yoke with sweat-wicking lining
• Secure fit keeps straps from wandering off shoulders
• Tool-friendly chest pockets on both sides
• Heavy-duty center D ring for hanging your rig
• Leather loop attachment system fits up to a 3 in. belt
• Made in USA

Occidental Leather B5055 Applications

• Support and stabilize heavy tool belts during daily use
• Reduce lower back and hip fatigue on framing and carpentry jobs
• Keep rigs balanced when carrying bulky tools and fasteners
• Quickly hang up complete belt systems between tasks

Occidental Leather B5055 Installation Overview

1. Attach leather loops to your tool belt (up to 3 in. width).
2. Connect front clips and set the chest strap to a comfortable tension.
3. Adjust strap lengths for even weight distribution.
4. Check shoulder yoke alignment and secure fit before use.
5. Use the center D ring to hang the rig when removing.

Occidental Leather 5009 Features

• Heavy duty bridle leather construction
• Large wool lined shoulder pads for comfort
• Spring clip attachment with loop hardware
• Fully adjustable straps
• Made in USA

Occidental Leather 5009 Applications

• Distribute tool belt weight for reduced strain
• Stabilize heavy tool rigs during carpentry or framing
• Attach to Occidental and other work belts using clips
• Comfort support for long jobsite days

Occidental Leather 5009 Installation Overview

1. Attach spring clips and loop hardware to your work belt.
2. Position suspenders so pads rest on shoulders.
3. Clip suspenders to belt front and rear attachment points.
4. Adjust strap length evenly for desired fit.
5. Check all clips and loops for secure connection before use.

Occidental Leather 8567 Key Features

• Right-hand layout
• Fits a 3 in belt
• Hybrid construction: industrial nylon body with leather reinforcement
• 4 pockets and holders for drill, bits, and small tools
• Compatible with select Bosch, Hitachi, Makita, and Milwaukee compact drills and drivers
• Made in USA

Occidental Leather 8567 Applications

• Hands-free carry of cordless drills and impact drivers
• Bit and small fastener organization on the belt
• Framing, punch-out, and general construction tasks

Occidental Leather 8567 Installation Overview

1. Slide the holster onto a work belt up to 3 inches wide.
2. Secure the leather strap/snaps as designed.
3. Place the drill or driver in the main pocket.
4. Store bits and small tools in the exterior sleeves.

Occidental Leather B9019 Key Features

• Compact single-compartment pouch for fast access
• Padded, double wall industrial nylon for structure and durability
• Lightweight design suited for small jobs or as a third bag
• Slides onto work belts; compatible up to 3 in. belts
• Made in the USA

Occidental Leather B9019 Applications

• Carry fasteners, parts, or small hand tools
• Add-on storage for tool belt systems
• Service calls and light-duty tasks
• Organizing essentials for trim or punch list work

Occidental Leather B9019 Installation Overview

1. Thread the bag onto your work belt (fits up to 3 in.).
2. Position at preferred location for access.
3. Load with small tools, fasteners, or parts.
4. Check balance and adjust as needed on the belt.

Occidental Leather 9520LH Features

• Compact, lightweight bag ideal for trim, framing and finish work
• Round-bottom nylon main and outer bags for durability and easy access
• Speed square holder usable inside or outside
• Patented 2-in-1 outer bag increases fastener capacity
• Left-handed layout worn on right side for right-hand access
• Includes 2003 Oxy Tool Shield for sharp tool protection

Occidental Leather 9520LH Applications

• Trim carpentry organization and fastener access
• Framing tasks requiring quick tool retrieval
• Finish work where compact storage is preferred
• Left-handed setups worn on right side

Occidental Leather 9520LH Installation Overview

1. Attach bag securely to your work belt.
2. Position on the right side for left-handed layout.
3. Load fasteners and tools into main and 2-in-1 outer bag.
4. Place speed square in the designated holder (inside or outside).
5. Store sharp tools in the included Oxy Tool Shield.

Occidental Leather 5525 Key Features

• Round-bottom design increases internal volume and stability
• 10 pockets and holders optimized for fasteners and layout tools
• Tape pocket fits tapes up to 35 ft
• Includes Oxy Tool Shield to protect sharp tools, bags, and body
• Right-hand layout; worn on the left side
• Premium leather construction; Made in the USA

Occidental Leather 5525 Applications

• Fastener storage for framing and carpentry tasks
• Organizing layout tools like squares and bits
• Measuring and marking with quick tape access
• Daily jobsite carry on a work belt

Occidental Leather 5525 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right-handed use.
3. Insert the Oxy Tool Shield into the designated holder.
4. Load fasteners and tools into the appropriate pockets.
5. Confirm secure fit and balance before use.

Occidental Leather 9503 Key Features

• Angle square holster for quick access
• Single clip-on, large capacity main bag
• Attaches to belts or waistbands for grab-and-go use
• Industrial nylon construction
• Made in USA

Occidental Leather 9503 Applications

• Carry nails, screws, and small hand tools
• Light-duty service calls and punch-list tasks
• DIY and weekend project setups
• Quick add-on storage to existing work belts

Occidental Leather 9503 Installation Overview

1. Clip the pouch onto a belt or waistband.
2. Seat the angle square in the holster slot.
3. Load fasteners or small tools into the main bag.
4. Verify secure attachment before use.

Occidental Leather 5545 Key Features

• Accepts nail strips up to 16D size
• Heavy belting leather construction
• Holds up to 8 racks
• Fits belts up to 3 inches wide
• Made in the USA

Occidental Leather 5545 Applications

• Keep nail strips at hand for faster nail gun reloads
• Organize collated nails while framing, roofing, or decking
• Reduce trips to refill fasteners on the jobsite

Occidental Leather 5545 Installation Overview

1. Thread the holster onto your work belt (up to 3 inch width).
2. Load collated nail strips into the pouch.
3. Position for preferred hand access and begin work.

Occidental Leather 8580M Features

• Hand-specific tool holder layout for efficient workflow
• Padded two-ply bags maintain shape when empty or loaded
• Extremely abrasion-resistant industrial nylon exterior
• Full leather boot with distinctive FatLip leather mouth
• 3 in HD Ranger belt with rear 2-in-1 tool and hammer holder
• Pockets and tool holders: 25
• Made in USA

Occidental Leather 8580M Applications

• Framing and production carpentry
• General carpentry and remodeling
• Jobsite organization for tools and fasteners
• Finish work requiring hand-specific pouch layout

Occidental Leather 8580M Installation Overview

1. Put on the belt over your typical work clothing and note the hole you use.
2. Remove the belt, lay it flat, and measure from the end of the buckle to that hole.
3. Select Medium if your measurement is near 37 in; adjust using the midpoint hole for fit.

Occidental Leather 5114K Key Features

• Low profile sleeve keeps tool snug to the body
• DIY install kit with copper rivets and instructions
• Premium leather construction, handcrafted
• Made in the USA

Occidental Leather 5114K Applications

• Framing and structural carpentry carry
• Roofing tasks requiring secure pry bar access
• Finish carpentry and trim work
• Mounting to tool pouches, vests, or belt rigs

Occidental Leather 5114K Installation Overview

1. Gather tools: smooth face hammer, side cutters, 9/32 deep socket, pick, drill with 3/16 bit, and a hard surface.
2. Drill out and remove the two outer rivets on the nondominant side bag.
3. Position sleeve; push a new rivet through the hanger and sleeve holes.
4. Seat washer using a hammer and socket or small pipe.
5. Trim excess rivet length to about 1/8 - 3/16 in.
6. Peen the rivet on a hard surface until tight; repeat for remaining rivet.

Occidental Leather 9512 Features

• Tool-specific storage for tape, pad, pens, pencils, screwdriver, utility knife, and pliers
• Accepts work belts up to 2 inches wide
• Industrial 2-ply Cordura fabric with foam core for structure
• Made in the USA

Occidental Leather 9512 Applications

• Punch list jobs and service calls
• Inspections and light-duty tasks
• Field technician essentials carry
• Belt-mounted tool organization

Occidental Leather 9512 Installation Overview

1. Slide the pouch onto a work belt up to 2 inches wide.
2. Position the pouch for comfortable access.
3. Load tools into the dedicated holders.
4. Ensure items are seated securely before use.

Occidental Leather 5080LG Key Features

• Premium top grain leather construction
• Hand specific tool holders for working rhythm
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Function engineered for modern builders
• Left handed option available as 5080LH
• Made in USA

Occidental Leather 5080LG Applications

• Framing and general carpentry tool carry
• On site construction and renovation
• Efficient organization of fasteners and hand tools
• Daily use by professional builders

Occidental Leather 5080LG Installation Overview

1. Place belt over typical work clothing where it will be worn.
2. Measure from the buckle to the hole you use most.
3. Select the belt size mid range closest to that measurement.
4. Adjust using the 9 holes and position bags and holders as preferred.

High Mount Hammer Holder Key Features

• High-mount profile reduces hammer swing
• 10 oz full-grain belting leather construction
• Heavy-duty 2.5 inch steel loop fits most hammers
• Fits work belts up to 3 inches wide
• Compact, comfortable carry; Made in the USA

High Mount Hammer Holder Applications

• Framing and roofing tasks
• Overhead work and ladder use
• Tight-space maneuvering
• General jobsite tool belt organization

High Mount Hammer Holder Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position at preferred height for a high-mount carry.
3. Insert hammer through the 2.5 inch steel loop.
4. Verify secure fit and comfortable clearance while moving.

Occidental Leather 8089 LG Key Features

• Hand specific tool layout for efficient workflow
• Padded two ply bags maintain shape
• Extremely abrasion resistant industrial nylon body
• Leather tool holders and corner reinforcements
• 12 oz belting leather with steel roller buckle
• Pockets and tool holders: 22
• Weight: 4.1 lbs

Occidental Leather 8089 LG Applications

• Framing and general carpentry tool organization
• Jobsite fastener and hand tool carry
• Daily wear belt system for professional builders

Occidental Leather 8089 LG Installation Overview

1. Lay your current tool belt flat and measure from buckle end to the hole you use most.
2. Select the size closest to that midpoint measurement.
3. If you do not have a belt, add 4 inches to pant waist to estimate mid range.
4. Adjust the 5035 belt using the roller buckle for a secure fit.

Occidental Leather 8080DBLHLG Key Features

• Left handed layout with hand specific tool holders
• Padded two ply tool bags hold their shape
• Industrial nylon body provides high abrasion resistance
• Leather tool holders with OxyRed reinforced corners
• Lighter weight alternative to full leather framer sets

Occidental Leather 8080DBLHLG Applications

• Framing and rough carpentry tasks
• General construction and remodeling
• Jobsite tool organization and carry
• Left handed users needing a dedicated layout

Occidental Leather 8080DBLHLG Installation Overview

1. Measure an existing belt from buckle to the most used hole to determine size.
2. Select the Large belt if your measurement falls in its mid range.
3. Position the belt over work clothing and adjust for a snug fit.
4. Arrange the left handed bags and hammer holder on the belt as preferred.
5. Load tools into the hand specific holders to verify balance and access.

Occidental Leather 6530 Features

• Designed for standard 2.5 in round chew or dip cans
• 2 in proprietary steel belt clip; fits belts or waistbands up to 2 in wide
• Full-grain leather construction in classic OxBlood red
• Embossed Occidental Leather logo
• Made in USA

Occidental Leather 6530 Applications

• Jobsite carry for chew or dip cans
• Framing, welding, and general trades work
• Everyday belt or waistband accessory
• Walking the site while keeping hands free

Occidental Leather 6530 Installation Overview

1. Slide the steel clip onto a belt or waistband up to 2 in wide.
2. Insert the 2.5 in can into the leather holster.
3. Check retention and adjust holster position for easy access.
4. Remove the holster by lifting the clip and sliding off the belt.