April Bestsellers

Occidental Leather B8064 Features

• Patented 2-in-1 outer pouch with angle square holster
• Tri-square sleeve, cat's paw loop, nail set and driver bit pouches
• Four-bag layout for layered storage
• Holds fasteners and tools commonly accessed with the left hand
• Made in USA

Occidental Leather B8064 Applications

• Framing: Keep nails, square, and layout tools organized
• General carpentry: Quick access to bits, nail sets, and cat's paw
• Layout work: Integrated angle square holster for fast measurement
• Jobsite organization: Layered pouches separate fasteners and small tools

Occidental Leather B8064 Installation Overview

1. Select right- or left-handed variant to match your setup.
2. Slide the bag onto a compatible work belt and secure.
3. Position fastener bag on the left side for right-handed users; right side for left-handed users.
4. Load fasteners and layout tools into the designated sleeves and pouches.
5. Verify comfortable reach and adjust placement as needed.

Occidental Leather 5020 Key Features

• Two tools, one footprint for belt space efficiency
• Slides easily onto standard tool belts
• 12 oz English bridle leather construction for durability
• Purpose built for pros and DIY users
• Made in USA

Occidental Leather 5020 Applications

• Carry a hammer and pliers or similar hand tool at the ready
• Carpentry and framing work on site
• General construction and remodel tasks
• Workshop and home project tool carry

Occidental Leather 5020 Installation Overview

1. Thread the holder loop onto your work belt.
2. Position at the preferred hip location.
3. Insert hammer into the metal loop.
4. Place a hand tool into the leather pocket.
5. Check clearance and adjust belt position for comfort.

Occidental Leather 5156 Key Features

• Steel cradle style holder for secure hammer carry
• 2 in. belt slot sized for narrow belts
• Steel hardware riveted to extra heavy leather back
• Compatible with 2 in. Leather Work Belt 5002 and Stronghold Beltless rear strap
• Made in the USA

Occidental Leather 5156 Applications

• Secure hammer carry on 2 in. belts
• Framing and carpentry belt setups
• Use with beltless suspenda style rear straps
• General construction and remodeling

Occidental Leather 5156 Installation Overview

1. Thread a 2 in. belt through the two vertical slots.
2. Position holder at desired location on the belt or rear strap.
3. Tighten belt and ensure the holder sits flat against your side.
4. Insert hammer into steel cradle and check for secure fit.

Occidental Leather 5093 Key Features

• Padded shoulder yoke lined with Dri-Lex for moisture management
• Fully adjustable straps for a personalized fit
• Even weight distribution to reduce lower back strain
• 25 total pockets and holders keep tools accessible
• Right-handed layout; hand-specific tool placement
• Includes 5156 Cradle Hammer Holder on rear
• One size fits most; expansion kit 5045 available for builders over 6 ft 2 in
• Made in the USA

Occidental Leather 5093 Applications

• Framing and general carpentry tool carry
• Remodeling projects requiring high-capacity organization
• Jobsites where belt-free load distribution is preferred
• All-day wear to reduce hip and lower back fatigue
• Use with clip-on holders and accessories for custom setups

Occidental Leather 5093 Installation Overview

1. Adjust shoulder straps and chest strap for a secure, comfortable fit.
2. Attach fastener and tool bags to the suspension rings.
3. Clip on the hammer holder and accessory holders as desired.
4. Load tools evenly across both sides to balance weight.
5. Fine-tune strap tension and verify unrestricted movement.

Occidental Leather 9025 Key Features

• Compact 6-in-1 design combines pockets and holders
• Padded nylon fastener bag for added capacity
• Holds tape, hammer, knife or chisel, pencils and fasteners
• Space-saving add-on for tool belts or vests
• Ideal for trim, punch list, and small tasks

Occidental Leather 9025 Applications

• Carry essentials for quick service calls
• Trim and finish work where a light setup is needed
• Punch list tasks and small repairs
• Supplemental pouch for tool belts or vests

Key Features

• Wide 5 in belt for enhanced back support
• Suspender attachment loops
• Thick padded interior for comfort and moisture wicking
• Heavy-duty buckles and belt loops minimize bag sliding
• 2 in all-leather overbelt; edge-stitched for strength
• Made in the USA

Applications

• Supporting tool bags and pouches on the jobsite
• Use with suspenders via integrated attachment loops
• Comfortable heavy-duty belt for framing, finish, or general carpentry

Installation Overview

1. Put the belt on over typical work clothing where you will wear it.
2. Measure from the buckle to the hole you use; that measurement is your belt size.
3. Select size XL (approx. 45 in belt size) and adjust using the 9-hole range.
4. Attach tool bags to the overbelt and secure through the belt loops.
5. Clip suspenders to the attachment loops if desired and check fit.

Occidental Leather B8018DB Key Features

• Most popular OxyLights tool bag
• Integrated tape holder fits up to 35 ft FatMax
• Tool-specific holders plus hammer loop for fast access
• Right-side orientation; not offered in left-hand model
• Durable leather and nylon construction

Occidental Leather B8018DB Applications

• Everyday carry of layout and cutting tools
• Framing and finish tasks requiring fast access to hand tools
• Jobsite organization with right-hand dominant layouts
• Tape, level, and marking tool storage on belt systems

Occidental Leather B8018DB Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into the dedicated holders and main pockets.
4. Place a tape measure in the leather holder; verify secure fit.
5. Check balance and adjust belt for comfortable carry.

Occidental Leather 8505 Features

• Clip-on mount attaches to belt or pocket for quick access
• 4 tool pockets sized for knife, pencils, and 35 ft tape
• FatMax compatible tape pocket
• Ultra-lightweight at 0.2 lbs for all-day comfort
• Durable nylon with leather reinforcement; made in USA

Occidental Leather 8505 Applications

• Carry and organize measuring tape, utility knife, and pencils
• Quick tool access on belt or pocket during layout and marking
• Jobsite or shop use where compact organization is needed

Occidental Leather 8505 Installation Overview

1. Clip the holder onto your belt or pocket.
2. Place tape measure, knife, and pencils into designated pockets.
3. Confirm the clip is secure and pockets are seated.
4. Adjust tool placement for comfortable reach.

Occidental Leather 5522 Key Features

• 4-in-1 functionality for tape, pencil, crayon or screwdriver, plus sharp tools
• Full-grain American leather for long service life
• Free Oxy Tool Shield included for chisels, knives, cutters
• Belt-ready tunnel loop fits up to 3 in. belts
• Made in USA

Occidental Leather 5522 Applications

• On-belt organization for measuring and marking tools
• Carpentry and framing jobs requiring quick access to tape and pencil
• General construction and DIY tool carry
• Safe storage of sharp tools using the included shield

Occidental Leather 5522 Installation Overview

1. Slide the holder onto a belt up to 3 in. wide.
2. Seat the Oxy Tool Shield in the lower pocket.
3. Place tape measure in the main pocket.
4. Insert pencil and crayon or screwdriver in side sleeves.
5. Load sharp tools into the shield and verify secure fit.

Occidental Leather 5509 Features

• Made in USA
• Fits up to a 3 in work belt
• Pre-riveted D ring loops for slip-on attachment
• Compatible with suspenders models 1546, 5009 and 5055

Occidental Leather 5509 Applications

• Add D ring attachment points to non-suspender belts
• Convert work belts to be suspenders-ready
• Replace or expand attachment loops on belts
• Set up multiple belts for quick suspender transfer

Occidental Leather 5509 Installation Overview

1. Slide each loop onto the belt and position evenly.
2. Align D rings at front and rear as preferred.
3. Attach suspender clips to the D rings.
4. Put on belt and adjust suspender length for comfort.

Occidental Leather 8585XL Key Features

• Hand specific tool holders for efficient layout
• Padded two ply tool bags hold their shape
• Industrial nylon is highly abrasion resistant
• Leather tool holders with leather reinforced corners
• Available left handed as model 8585LH

Occidental Leather 8585XL Applications

• Carpentry and framing setups
• General construction tool carry
• Remodeling and jobsite installation work

Occidental Leather 8585XL Installation Overview

1. Lay your current belt flat; measure from buckle end to most used hole.
2. Select the Extra Large size closest to that mid range measurement.
3. Position bags and holders to preferred left or right layout.
4. Secure buckle and adjust for a snug, supportive fit.

Occidental Leather 5044XL Key Features

• Adds extra length to existing suspenders for a better fit
• Compatible with Occidental 5009 and 5055 suspenders and systems
• Durable leather straps with metal hardware
• Quick clip-on connection for easy setup
• Sold as a matched pair; Made in USA

Occidental Leather 5044XL Applications

• Extend fit range for big and tall builders
• Upgrade or replace worn suspender extensions
• Improve comfort when wearing heavy tool belts

Occidental Leather 5044XL Installation Overview

1. Detach suspenders from your belt or vest if needed.
2. Clip each extension to the suspender connection point.
3. Attach the opposite end to your belt or harness D-rings.
4. Adjust suspender length for a comfortable fit.
5. Verify all clips are fully seated before use.

Occidental Leather 5585 Key Features

• Divided upright interior — 16 screwdriver loops and 9 center compartments
• Exterior storage — 6 outside pockets and 6 outside tool loops
• Rugged build — heavy lock-stitched nylon thread and reinforced bottom
• Leather luggage-style handle for comfortable carry
• Steel Dee hardware for optional shoulder strap
• Includes snap clip and location strap for clip-on items
• Made in the USA

Occidental Leather 5585 Applications

• Organizing and transporting hand tools on the jobsite
• Electrician, maintenance, and service technician tool carry
• Workshop storage for frequently used tools and fasteners
• Clip-on accessory expansion with included 9501 bag and Tool Shields

Occidental Leather 5585 Installation Overview

1. Load tools into divided interior and loops for balanced weight.
2. Attach 9501 clip-on bag and Tool Shields to desired locations.
3. Use the leather handle for carry; add a shoulder strap to Dee rings if desired.
4. Inspect rivets and stitching periodically to ensure secure carry.

Occidental Leather 5523 Key Features

• 4-in-1 capacity for tape, pencil, crayon or screwdriver, plus sharp tool
• Includes Oxy Tool Shield for chisel, knife, or cutter protection
• Extra heavy duty steel clip fits belts up to 2 in wide
• Sturdy American leather construction for long service life
• Compact clip-on design saves belt space
• Made in USA

Occidental Leather 5523 Applications

• Everyday carry of tape measure and small hand tools
• Safe transport of chisels or knives with the included shield
• Carpentry and trim layout tasks
• General construction and remodeling

Occidental Leather 5523 Installation Overview

1. Slide the steel clip onto a belt up to 2 in wide.
2. Place tape measure in the main pocket.
3. Insert pencil and crayon or screwdriver into their sleeves.
4. Seat sharp tools inside the Oxy Tool Shield.
5. Adjust position on belt for comfort and access.

Occidental Leather 8003M Key Features

• 3" wide padded industrial nylon belt body for support and comfort
• 2" heavy leather tongue with nickel plated steel roller buckle
• Lightweight construction helps reduce fatigue
• Compatible with most tool and fastener bags and suspenders
• Edge stitched for durability and appearance
• Made in USA

Occidental Leather 8003M Applications

• Foundation belt for carrying tool and fastener bags
• Use with suspenders for added load distribution
• General jobsite wear where comfort and support are needed

Occidental Leather 8003M Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole to confirm size.
2. Select Medium if your mid range measurement is about 37".
3. Thread the leather tongue through the buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags and optional suspenders.
5. Adjust fit as needed for clothing layers.

Occidental Leather 5526 Key Features

• Round-bottom leather construction adds volume and resists collapse
• Tool-specific storage: torpedo level slot, bit holders, pencil and chisel pockets
• Right-hand layout; worn on the right side
• Includes Oxy Tool Shield for safe carry of sharp tools
• Not available in a left-hand model

Occidental Leather 5526 Applications

• Carpentry and framing tool organization on a work belt
• Right-hand access to frequently used tools
• Jobsite fastener and small tool storage
• General construction and remodeling tasks

Occidental Leather 5526 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for dominant-hand access.
3. Insert the Oxy Tool Shield into the designated pocket.
4. Load tools into dedicated holders and pockets.
5. Check balance and security before working.

Occidental Leather 2006 Features

• Protects pouches and bags from knives, chisels, scribes and other sharp tools
• Rigid polypropylene provides smooth, snag free tool access
• Universal fit for most tool bags and vest pockets
• Lightweight and durable for daily jobsite use
• Made in the USA

Occidental Leather 2006 Applications

• Line tool pockets to prevent punctures from sharp tools
• Outfit work vests and pouches for better tool organization
• Extend lifespan of tool bags by adding internal protection
• Keep chisels and knives upright for faster retrieval

Occidental Leather 2006 Installation Overview

1. Choose the pocket or pouch that holds sharp tools.
2. Drop the Pocket Shield into the pocket with the curve matching the pocket shape.
3. Seat it fully against the inner wall.
4. Load tools; verify smooth insertion and removal.
5. Reposition or replace the insert as it wears.

Occidental Leather 9501 Key Features

• Cost efficient fastener management
• Single clip-on design for quick swaps between applications
• Keep multiple pouches preloaded and clipped to your toolbox or truck
• Adds fastener storage or sub divides existing main bags
• Secure steel clip fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9501 Applications

• Add fastener capacity to any belt setup
• Sub-divide larger tool bags for better organization
• Preload pouches for task-specific jobs and swap quickly
• Clip to toolboxes or bags for mobile storage
• Use on belts up to 2 inches wide

Occidental Leather 9501 Installation Overview

1. Load fasteners or small parts into the pouch.
2. Position the steel clip over a belt up to 2 inches wide or onto a toolbox/bag edge.
3. Press firmly to seat the clip securely.
4. Arrange multiple preloaded pouches as needed for the task.
5. Remove and swap pouches when changing applications.

Occidental Leather 9005 Features

• Provides extra lower back support on tool belts
• Slides under a third bag or hammer holder
• High density foam pad with polyethylene stiffener
• Durable industrial nylon cover
• Made in USA

Occidental Leather 9005 Applications

• Add support and comfort to existing work belts
• Use beneath a third bag or hammer loop without interference
• Stabilize belt load during heavy tool carry
• Retrofit for most professional tool belt systems

Occidental Leather 9005 Installation Overview

1. Slide the Belt Buddy onto your work belt at the rear center.
2. Position so it sits comfortably at the lower back.
3. Attach a third bag or hammer holder over the pad if desired.
4. Tighten belt and adjust for support and fit.

Key Features

• Purpose built to fasten leather straps to the 5055 Suspender pad
• Simple, field-ready installation using Chicago screws
• Leather washers help protect and secure the strap connection
• Compact, lightweight kit for replacements or spares
• Made in USA

Applications

• Attach leather suspender straps to the 5055 pad
• Replace missing or worn hardware on the 5055 system
• Tighten or refresh existing strap connections

Installation Overview

1. Position strap and pad per the 5055 layout.
2. Align holes and place leather washer at the connection point.
3. Insert Chicago screw post through the pad and strap.
4. Thread and tighten the screw until secure; do not overtighten.
5. Repeat for the second connection and verify a snug, secure fit.

Occidental Leather 5089 XXL Features

• Premium top grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper rivet reinforcements on main bags
• NoSpill tool holder system for secure storage
• Function engineered for professional framers
• Available left-handed option: 5089LH
• Made in the USA

Occidental Leather 5089 XXL Applications

• Framing: organize and carry essential tools and fasteners
• General carpentry: keep hand tools accessible on site
• Jobsite setup: maximize capacity with seven pouch layout
• Heavy outdoor use: durable leather for demanding conditions

Occidental Leather 5089 XXL Installation Overview

1. Measure from the end of your belt buckle to the hole you use to fasten.
2. Select the belt size closest to that measurement; XXL is mid range 49 inches.
3. Attach tool and fastener bags to the belt per your hand preference.
4. Secure the hammer holder and adjust belt to the midpoint hole.
5. Load tools and confirm comfortable, balanced fit.

Occidental Leather 5025 Features

• Fits pliers, side cutters, crimpers, and plumb bobs
• Open-bottom design for longer tools and debris release
• Full-grain leather construction for durability
• Compact profile with minimal bulk on belt
• Made in the USA

Occidental Leather 5025 Applications

• Keep pliers and cutters accessible on the job
• Hold plumb bobs for surveying and layout work
• Organize essential hand tools on a work belt
• Daily use for electricians, framers, and general trades

Occidental Leather 5025 Installation Overview

1. Thread holster onto your work belt and position as desired.
2. Insert tool fully into the holster.
3. Confirm secure fit and comfortable access before use.

Occidental Leather 9511 Key Features

• Cost efficient fastener management
• Modular clip-on design for easy swap between tasks
• Slightly deeper and narrower than the 9501
• Clips to belts up to 2 in wide; also clips to toolboxes or truck interiors
• Made in USA

Occidental Leather 9511 Applications

• Carrying nails, screws, and small fasteners
• Modular add-on storage for tool belts
• Quick-change setups for varied tasks
• Clipping to a truck or toolbox for organized access

Occidental Leather 9511 Installation Overview

1. Verify your belt is no wider than 2 in.
2. Slide the clip over the belt edge until fully seated.
3. Load fasteners into the pouch.
4. Adjust position on belt for comfort and reach.
5. Remove and reclip as needed for different applications.

Occidental Leather 5062 Features

• 4 pouch layout for compact, expanded capacity
• 10 pockets and tool holders for fasteners and layout gear
• Tool-specific slots for blade square, angle square, driver bits, and cat's paw
• Full-grain leather construction for long-term durability
• Worn on the non-dominant side; available as left-hand 5062LH
• Made in the USA

Occidental Leather 5062 Applications

• Framing and general carpentry tool and fastener carry
• Organizing layout tools like blade and angle squares
• Quick access to driver bits, nail sets, and cat's paw
• Left-side fastener storage for right-handed users

Occidental Leather 5062 Installation Overview

1. Slide the pouch onto a 3 in belt or compatible work belt.
2. Position on the left side for right-handed use or select 5062LH for left-handed layout.
3. Load fasteners and tools into the four stacked compartments.
4. Place blade square and angle square in designated holders; store bits and cat's paw in slots.
5. Confirm secure fit and balanced carry before use.