All Products

Occidental Leather 2006 Features

• Protects pouches and bags from knives, chisels, scribes and other sharp tools
• Rigid polypropylene provides smooth, snag free tool access
• Universal fit for most tool bags and vest pockets
• Lightweight and durable for daily jobsite use
• Made in the USA

Occidental Leather 2006 Applications

• Line tool pockets to prevent punctures from sharp tools
• Outfit work vests and pouches for better tool organization
• Extend lifespan of tool bags by adding internal protection
• Keep chisels and knives upright for faster retrieval

Occidental Leather 2006 Installation Overview

1. Choose the pocket or pouch that holds sharp tools.
2. Drop the Pocket Shield into the pocket with the curve matching the pocket shape.
3. Seat it fully against the inner wall.
4. Load tools; verify smooth insertion and removal.
5. Reposition or replace the insert as it wears.

Key Features

• Purpose built to fasten leather straps to the 5055 Suspender pad
• Simple, field-ready installation using Chicago screws
• Leather washers help protect and secure the strap connection
• Compact, lightweight kit for replacements or spares
• Made in USA

Applications

• Attach leather suspender straps to the 5055 pad
• Replace missing or worn hardware on the 5055 system
• Tighten or refresh existing strap connections

Installation Overview

1. Position strap and pad per the 5055 layout.
2. Align holes and place leather washer at the connection point.
3. Insert Chicago screw post through the pad and strap.
4. Thread and tighten the screw until secure; do not overtighten.
5. Repeat for the second connection and verify a snug, secure fit.

Occidental Leather 2003 Features

• Clip-on convenience for bags or pockets
• Protects tools, bags, and body from sharp edges
• Holds a chisel, knife, diagonal cutter; plus one round pencil
• Lightweight, compact, and jobsite-ready
• Made in the USA

Occidental Leather 2003 Applications

• Safe storage of sharp edge tools on the belt or in bags
• Protecting tool pouches and clothing from blade damage
• Keeping a round pencil handy alongside primary tool
• Organizing chisels, knives, and cutters for quick access

Occidental Leather 2003 Installation Overview

1. Attach the shield by clipping it to a tool bag edge or pocket.
2. Insert the primary tool into the main compartment.
3. Place a round pencil in the dedicated side slot.
4. Ensure the clip is fully seated and the tool is secure before use.

Occidental Leather 8071XL Features

• Extra-long back strap for the 5592 Beltless Retro Kit only
• 6 inches longer than the standard 8071 strap
• Heavy-duty build for jobsite durability
• Made in the United States

Occidental Leather 8071XL Applications

• Extend rear strap length on 5592 Beltless Retro Kit
• Improve bag swing and comfort for larger frames
• Replace worn or damaged back strap on compatible kits

Occidental Leather 8071XL Installation Overview

1. Detach the existing back strap from the Beltless Retro Kit.
2. Loop the 8071XL strap through the rear buckle/attachment points.
3. Secure using the provided leather tabs and hardware.
4. Adjust length for desired bag swing and fit.
5. Check connections to ensure secure attachment before use.

Occidental Leather 8071 Key Features

• Back strap ONLY for the 5592 Beltless Retro Kit
• Heavy duty construction for long service life
• Made in USA
• Simple, tool free attachment to Beltless system

Occidental Leather 8071 Applications

• Replace worn or damaged back strap on Beltless Retro Kit
• Maintain proper support and balance of Beltless system
• Improve bag movement and accessibility on Beltless setup

Occidental Leather 8071 Installation Overview

1. Detach the existing back strap from the Beltless Retro Kit loops.
2. Feed the new strap through the attachment points on both bags.
3. Secure ends and center buckle, ensuring even alignment.
4. Adjust strap tension for desired bag swing and comfort.
5. Confirm all connections are tight before use.

Occidental Leather 5031 Key Features

• Belt-worn utility attachment for spring-snap tools
• Fits up to a 3 inch work belt
• 3/4 inch dee ring for secure clipping
• Leather strap construction for durability
• Snap closure secures around belt
• Made in USA

Occidental Leather 5031 Applications

• Carry telephone butt-sets and testers from a belt
• Attach meters, small tools, or lanyards via spring snaps
• Add a quick-access ring point to tool belts
• Organize clip-on accessories for electricians and technicians
• Temporary attachment point for keys or ID holders on the job

Occidental Leather 5031 Installation Overview

1. Open the strap and place it around your work belt.
2. Position the dee ring where you want access.
3. Snap the closure to secure the strap to the belt.
4. Attach the spring snap from your tool or lanyard to the dee ring.
5. Confirm the snap and ring are fully engaged before use.

Occidental Leather 8570 Features

• Fits most standard cell phones and gadgets
• Heavy-duty elastic side panels provide a snug, flexible fit
• Velcro® closure keeps device secure
• 2″ spring steel clip attaches to belts or waistbands

Occidental Leather 8570 Applications

• Everyday belt carry for phones on the jobsite
• Hands-free phone access while working
• Secure storage to prevent drops or loss
• Quick clip-on use with work belts or waistbands

Occidental Leather 8570 Installation Overview

1. Slide the 2″ spring steel clip over your belt or waistband.
2. Insert phone into the holster; elastic sides will expand to grip.
3. Close the Velcro® flap to secure the device.
4. Ensure the clip is fully seated and the flap is fastened before use.

Occidental Leather 5010 Features

• 1 inch wide leather loop supports a safety release snap
• Ideal for saw keys, small wrenches, and similar items
• Keeps frequently used tools within easy reach
• Durable leather construction
• Made in USA

Occidental Leather 5010 Applications

• Hang keys, small wrenches, and accessories from a belt or bag
• Add quick access clip point to tool belts or pouches
• Organize frequently used small tools on the jobsite

Occidental Leather 5010 Installation Overview

1. Slide the leather loop onto your belt, strap, or D ring.
2. Secure the loop so the snap hangs freely.
3. Clip keys or small tools to the safety release snap.
4. Verify the snap opens and closes smoothly before use.

Occidental Leather 5026 Key Features

• Quick clip point for tape measures, clip on pouches and meters
• Fits belts up to 3 inches; accepts clips up to 1 inch
• Leather loop with steel rectangular ring for durability
• Compact add on for any tool belt
• Made in USA

Occidental Leather 5026 Applications

• Attach tape measures to your belt
• Hang small clip on bags or meter cases
• Add an extra hook point to existing tool belts
• Organize frequently used clip on tools

Occidental Leather 5026 Installation Overview

1. Slide the loop onto a work belt up to 3 inches wide.
2. Position where convenient on your belt.
3. Attach clip on tools or accessories with clips up to 1 inch wide.

Occidental Leather 5044XL Key Features

• Adds extra length to existing suspenders for a better fit
• Compatible with Occidental 5009 and 5055 suspenders and systems
• Durable leather straps with metal hardware
• Quick clip-on connection for easy setup
• Sold as a matched pair; Made in USA

Occidental Leather 5044XL Applications

• Extend fit range for big and tall builders
• Upgrade or replace worn suspender extensions
• Improve comfort when wearing heavy tool belts

Occidental Leather 5044XL Installation Overview

1. Detach suspenders from your belt or vest if needed.
2. Clip each extension to the suspender connection point.
3. Attach the opposite end to your belt or harness D-rings.
4. Adjust suspender length for a comfortable fit.
5. Verify all clips are fully seated before use.

Occidental Leather 5044 Features

• Adds 10 inches of length to suspenders
• Pair of straps for quick fit extension
• Compatible with 5009 and 5055 suspenders and suspension systems
• Made in USA

Occidental Leather 5044 Applications

• Extend suspender reach for larger builds
• Improve fit over bulky clothing or winter layers
• Fine-tune suspension system comfort

Occidental Leather 5044 Installation Overview

1. Identify attachment points on your 5009 or 5055 suspenders.
2. Clip each extension to the suspender ends.
3. Adjust overall length for a comfortable fit.
4. Confirm secure attachment before use.

Key Features

• Chemically neutral, salt-free formula safe for full-grain leather
• Penetrates leather fibers to inhibit oxidation and extend life
• Waterproofs, restores, and protects leather gear
• Natural ingredients: triple filtered beeswax, seed oils, and lipids
• Made in the USA

Applications

• Conditioning and maintaining Occidental Leather tool belts, bags, and pouches
• Waterproofing and protecting most other full-grain leather goods
• Reducing cracking, drying, and stitching damage from harsh use
• Not for use on suede or nubuck

Installation Overview

1. Clean leather; wipe off dirt and debris.
2. Apply a small amount with a clean cloth in circular motions until coated.
3. Allow cream to absorb; buff off any excess.
4. Repeat as needed for heavily worn areas.
5. Test on a small area first; do not use on suede or nubuck.

Occidental Leather 5009K Features

• Direct belt attachment for suspenders
• Works with Occidental models 5009 and 1546
• Hardware and instructions included for installation
• Designed for retrofitting additional belt sets
• Made in the USA

Occidental Leather 5009K Applications

• Attach suspenders directly to existing tool belts
• Create secure belt loops for suspender connection
• Upgrade or replace attachment hardware on belt systems

Occidental Leather 5009K Installation Overview

1. Identify attachment points on the belt per the guide.
2. Prepare holes at marked locations if required.
3. Position hardware and fasten using included rivets and washers.
4. Install rings and clips, then secure firmly.
5. Check alignment and fit; adjust for comfort.

Occidental Leather 5509 Features

• Made in USA
• Fits up to a 3 in work belt
• Pre-riveted D ring loops for slip-on attachment
• Compatible with suspenders models 1546, 5009 and 5055

Occidental Leather 5509 Applications

• Add D ring attachment points to non-suspender belts
• Convert work belts to be suspenders-ready
• Replace or expand attachment loops on belts
• Set up multiple belts for quick suspender transfer

Occidental Leather 5509 Installation Overview

1. Slide each loop onto the belt and position evenly.
2. Align D rings at front and rear as preferred.
3. Attach suspender clips to the D rings.
4. Put on belt and adjust suspender length for comfort.

Occidental Leather 5055K Features

• Made in USA
• Assembly required
• Creates slip on D ring attachment points for belts
• Genuine leather components with included hardware
• Works with Occidental suspenders 1546, 5009 and 5055

Occidental Leather 5055K Applications

• Retrofit tool belts to accept suspenders
• Add extra D ring loops to existing belt sets
• Replace worn suspender loops

Occidental Leather 5055K Installation Overview

1. Plan loop locations on the belt and mark holes.
2. Position leather loop, dee clip and D ring as shown in instructions.
3. Secure using supplied rivet or screw post and washer; tighten firmly.
4. Peen rivet or snug screw post; trim any excess strap if needed.
5. Attach suspenders to installed D rings and check fit.

Occidental Leather 6530 Features

• Designed for standard 2.5 in round chew or dip cans
• 2 in proprietary steel belt clip; fits belts or waistbands up to 2 in wide
• Full-grain leather construction in classic OxBlood red
• Embossed Occidental Leather logo
• Made in USA

Occidental Leather 6530 Applications

• Jobsite carry for chew or dip cans
• Framing, welding, and general trades work
• Everyday belt or waistband accessory
• Walking the site while keeping hands free

Occidental Leather 6530 Installation Overview

1. Slide the steel clip onto a belt or waistband up to 2 in wide.
2. Insert the 2.5 in can into the leather holster.
3. Check retention and adjust holster position for easy access.
4. Remove the holster by lifting the clip and sliding off the belt.

Occidental Leather 5156 Key Features

• Steel cradle style holder for secure hammer carry
• 2 in. belt slot sized for narrow belts
• Steel hardware riveted to extra heavy leather back
• Compatible with 2 in. Leather Work Belt 5002 and Stronghold Beltless rear strap
• Made in the USA

Occidental Leather 5156 Applications

• Secure hammer carry on 2 in. belts
• Framing and carpentry belt setups
• Use with beltless suspenda style rear straps
• General construction and remodeling

Occidental Leather 5156 Installation Overview

1. Thread a 2 in. belt through the two vertical slots.
2. Position holder at desired location on the belt or rear strap.
3. Tighten belt and ensure the holder sits flat against your side.
4. Insert hammer into steel cradle and check for secure fit.

Occidental Leather 5040 Key Features

• Quality leather and steel construction for durability
• Clip-on design allows quick on and off installation
• Spring steel clip fits belts up to 2 in wide
• Heavy-duty steel loop accommodates most hammers
• Made in USA

Occidental Leather 5040 Applications

• Keep a hammer secured to your belt for fast access
• Ideal for framing, carpentry, and general construction
• Convenient tool carry when working on ladders or overhead

Occidental Leather 5040 Installation Overview

1. Slide the spring clip onto your work belt.
2. Confirm the clip is fully seated and secure.
3. Place the hammer head through the steel loop.
4. Position for comfortable reach and adjust as needed.
5. Lift the clip to remove the holder when finished.

High Mount Hammer Holder Key Features

• High-mount profile reduces hammer swing
• 10 oz full-grain belting leather construction
• Heavy-duty 2.5 inch steel loop fits most hammers
• Fits work belts up to 3 inches wide
• Compact, comfortable carry; Made in the USA

High Mount Hammer Holder Applications

• Framing and roofing tasks
• Overhead work and ladder use
• Tight-space maneuvering
• General jobsite tool belt organization

High Mount Hammer Holder Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position at preferred height for a high-mount carry.
3. Insert hammer through the 2.5 inch steel loop.
4. Verify secure fit and comfortable clearance while moving.

Occidental Leather 5058M Features

• 100 percent cotton for everyday comfort
• Natural color with bold Oxy red logo centered on chest
• Anniversary logo on the right sleeve
• Crew neck short sleeve design
• Medium size fit

Occidental Leather 5058M Applications

• Casual wear on and off the jobsite
• Brand pride and promotional events
• Comfortable everyday workwear layer

Occidental Leather 9501 Key Features

• Cost efficient fastener management
• Single clip-on design for quick swaps between applications
• Keep multiple pouches preloaded and clipped to your toolbox or truck
• Adds fastener storage or sub divides existing main bags
• Secure steel clip fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9501 Applications

• Add fastener capacity to any belt setup
• Sub-divide larger tool bags for better organization
• Preload pouches for task-specific jobs and swap quickly
• Clip to toolboxes or bags for mobile storage
• Use on belts up to 2 inches wide

Occidental Leather 9501 Installation Overview

1. Load fasteners or small parts into the pouch.
2. Position the steel clip over a belt up to 2 inches wide or onto a toolbox/bag edge.
3. Press firmly to seat the clip securely.
4. Arrange multiple preloaded pouches as needed for the task.
5. Remove and swap pouches when changing applications.

Occidental Leather 9511 Key Features

• Cost efficient fastener management
• Modular clip-on design for easy swap between tasks
• Slightly deeper and narrower than the 9501
• Clips to belts up to 2 in wide; also clips to toolboxes or truck interiors
• Made in USA

Occidental Leather 9511 Applications

• Carrying nails, screws, and small fasteners
• Modular add-on storage for tool belts
• Quick-change setups for varied tasks
• Clipping to a truck or toolbox for organized access

Occidental Leather 9511 Installation Overview

1. Verify your belt is no wider than 2 in.
2. Slide the clip over the belt edge until fully seated.
3. Load fasteners into the pouch.
4. Adjust position on belt for comfort and reach.
5. Remove and reclip as needed for different applications.

Occidental Leather 8574 Key Features

• Clip-on leather holster for phones
• Velcro closure to fit many phone sizes
• Heavy duty elastic sides expand up to 1-1/2 in
• 2 in spring steel belt clip for secure attachment
• Made in USA

Occidental Leather 8574 Applications

• Everyday belt carry for standard size smartphones
• Jobsite phone protection with secure closure
• Hands-free access while working or commuting
• Clips to belts or waistbands up to 2 in wide

Occidental Leather 8574 Installation Overview

1. Slide the spring steel clip over your belt or waistband.
2. Place your phone inside the pocket.
3. Close the flap and press the Velcro to secure.
4. Confirm the elastic sides hold the phone snugly.
5. Check access and adjust position as needed.

Occidental Leather 5045 Key Features

• Converts Beltless systems to fit larger body sizes
• 10 inch straps add about 5 inches to suspender length
• Back strap adds up to 6 inches between bags
• Durable leather and nylon construction
• Made in USA

Occidental Leather 5045 Applications

• Extend Beltless suspenders for big and tall users
• Accommodate winter layers or bulky clothing
• Increase spacing between tool bags for comfort

Occidental Leather 5045 Installation Overview

1. Attach each leather extension to the existing Beltless suspender clips.
2. Fasten the back strap between the bags using the leather loops.
3. Adjust the buckle to set desired spacing and length.
4. Test fit and fine-tune for comfort and balance.