Occidental Leather
Occidental Leather 8585LH XXL Heritage FatLip Tool Bag Set - Left
Occidental Leather 8585LH XXL Description
Built for production carpenters, this left-handed Heritage FatLip setup features 10 inch deep bags with full leather boots and the signature leather FatLip mouth that stays open and resists abrasion. Padded, two-ply foam core pouches wrapped in industrial nylon keep their shape and stand up to heavy use.
Occidental Leather 8585LH XXL Includes
- (1) Heritage FatLip Tool Bag
- (1) HD 3 inch Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8585LH XXL Features
- FatLip leather mouth holds shape and resists wear
- Full leather boot for rugged durability
- Hand-specific tool layout for left-handed users
- Padded two-ply foam core helps bags keep form
- Industrial nylon exterior for high abrasion resistance
- 3 inch HD Ranger Belt for comfort and stability
- Includes center back 2-in-1 tool and hammer holder
- Made in USA
Occidental Leather 8585LH XXL Applications
- Framing and production carpentry
- Deck building and exterior construction
- Remodeling and general jobsite tool organization
- Finish prep and punch list tasks
Occidental Leather 8585LH XXL Installation Overview
- Select the correct belt size and orient the left-handed layout.
- Thread pouches onto the 3 inch Ranger belt in the preferred positions.
- Attach the 2-in-1 holder at the center back.
- Load tools and fasteners; adjust belt for secure fit.
Occidental Leather 8585LH XXL Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | XXL |
| Weight | 5.2 lbs |
| Material | Leather and Nylon |
| Bag Depth | 10 in |
| Belt Width | 3 in HD Ranger Belt |
| Handedness | Left |
| Made In | USA |
Occidental Leather 8585LH XXL Heritage FatLip Tool Bag Set - Left
Left-handed FatLip tool belt set XXL
✓ Left-handed layout (wear on right side)
✓ FatLip leather mouth stays open & resists abrasion
✓ Full leather boot for rugged durability
✓ 2-in-1 outer holder for tools or hammer
✓ Made in USA
Nylon Gear Care
- Brush off grit daily; wipe with a damp cloth and air dry.
- Shake out debris from the inside periodically.
- Avoid prolonged sun exposure and harsh chemical cleaners.
- For stubborn grime, clean with mild soap and water.
- Store in a cool, dry place when not in use.
Abrasions or small tear repair
- Seal with nylon repair tape or fabric patch; a small drop of super glue can work in a pinch.
- Clean and dry the surface before applying a patch.
- For added strength, stitch over the damaged area with heavy-duty thread.
Catching minor damage early helps prevent failure at seams, corners, and straps.
- FatLip Leather Mouth holds shape and resists abrasion
- Full Leather Boot for heavy-duty durability
- Hand-Specific Layout optimized for left-handed users
- Two-Ply Foam Core helps bags keep form when empty or loaded
- Industrial Nylon Exterior for rugged wear
- 3 inch HD Ranger Belt comfort and stability
- Includes 2-in-1 Holder for tools and hammer
- Pockets and Tool Holders: 25
- Belt Size: XXL
- Weight: 5.2 lbs
- Material: Leather, Nylon
- Bag Depth: 10 in
- Made in the USA
2 low in stock
Pay with
Top Sellers
Our Highest Quality Products
Newest Arrivals
Newest Arrivals to Tool Belt Outlet
Product Information
More About Occidental Leather 8585LH XXL Heritage FatLip Tool Bag Set - Left
Occidental Leather 8585LH XXL Description
Built for production carpenters, this left-handed Heritage FatLip setup features 10 inch deep bags with full leather boots and the signature leather FatLip mouth that stays open and resists abrasion. Padded, two-ply foam core pouches wrapped in industrial nylon keep their shape and stand up to heavy use.
Occidental Leather 8585LH XXL Includes
- (1) Heritage FatLip Tool Bag
- (1) HD 3 inch Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8585LH XXL Features
- FatLip leather mouth holds shape and resists wear
- Full leather boot for rugged durability
- Hand-specific tool layout for left-handed users
- Padded two-ply foam core helps bags keep form
- Industrial nylon exterior for high abrasion resistance
- 3 inch HD Ranger Belt for comfort and stability
- Includes center back 2-in-1 tool and hammer holder
- Made in USA
Occidental Leather 8585LH XXL Applications
- Framing and production carpentry
- Deck building and exterior construction
- Remodeling and general jobsite tool organization
- Finish prep and punch list tasks
Occidental Leather 8585LH XXL Installation Overview
- Select the correct belt size and orient the left-handed layout.
- Thread pouches onto the 3 inch Ranger belt in the preferred positions.
- Attach the 2-in-1 holder at the center back.
- Load tools and fasteners; adjust belt for secure fit.
Occidental Leather 8585LH XXL Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | XXL |
| Weight | 5.2 lbs |
| Material | Leather and Nylon |
| Bag Depth | 10 in |
| Belt Width | 3 in HD Ranger Belt |
| Handedness | Left |
| Made In | USA |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
