Occidental Leather
Occidental Leather 8575 Clip-On Stronghold Insta-Vest Gear Pockets (right side)
Occidental Leather 8575 Description
The Stronghold® Clip-On Insta-Vest™ Gear Pockets (right side) adds organized storage to Stronghold suspenders via a durable spring steel clip. With 7 pockets & tool holders, a dedicated safety glasses pocket with Velcro® flap, and a fastener pouch with closure, this lightweight add-on keeps frequently used items within easy reach. Made in the USA.
Occidental Leather 8575 Includes
- (1) 8575 Clip-On Stronghold Insta-Vest Gear Pockets — Right Side
- (1) Oxy Tool Shield
Occidental Leather 8575 Features
- Spring steel clip attaches to the chest strap of Stronghold suspenders
- Right-side configuration for quick access
- 7 pockets & tool holders for organized carry
- Safety glasses pocket with secure Velcro® flap
- Fastener pouch with closure
- Lightweight design at just 0.83 lbs
- Made in the USA
Occidental Leather 8575 Applications
- Add on-board storage to Stronghold suspenders
- Keep safety glasses protected and accessible
- Carry markers, bits, small tools, and fasteners
- Organize daily-use items for carpentry and jobsite tasks
Occidental Leather 8575 Installation Overview
- Open the spring steel clip on the pouch back.
- Clip onto the chest strap of Stronghold suspenders on the right side.
- Ensure the pouch is seated securely and closures operate freely.
- Load tools, glasses, and fasteners into the designated pockets.
- Verify balance and retention before use.
Occidental Leather 8575 Specifications
| Weight | 0.83 lbs |
| Overall Dimensions | 17" x 7" x 3.5" |
| Glasses Holder | 3" x 6" x 1.5" |
| Pouch with Closure | 5.5" x 4.5" Deep |
| Pockets/Tool Holders | 7 |
| Orientation | Right side |
Occidental Leather 8575 Clip-On Stronghold Insta-Vest Gear Pockets (right side)
Clip-on right-side Insta-Vest gear pockets
✓ Right-side clip-on design for Stronghold suspenders
✓ 7 pockets/tool holders for organized carry
✓ Safety glasses pocket with Velcro® flap
✓ Includes Oxy Tool Shield for sharp tools
✓ Made in USA
2 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Care & Maintenance
- Brush off dust and debris after use, especially from pockets and seams.
- Clean the nylon body by spot-cleaning with mild soap and lukewarm water using a soft cloth. Rinse lightly and air-dry completely. Do not machine wash or tumble dry.
- Avoid bleach, harsh detergents, and petroleum-based solvents.
- Leather accents/trim: wipe clean with a damp cloth; if needed, apply a small amount of leather conditioner to keep the leather supple. Do not soak leather and do not dry with direct heat.
- Hook-and-loop (Velcro) closures: keep free of lint by brushing gently; close them before storage.
- Spring-steel clip: keep free of grit and wipe dry after exposure to moisture; a very light drop of oil on the hinge can help maintain smooth action and resist corrosion.
- Store in a cool, dry place away from prolonged direct sunlight.
- Use the included Oxy Tool Shield for sharp tools to protect the pocket fabric, and avoid overloading pockets beyond their intended capacity.
- Spring steel clip attaches to Stronghold suspender chest strap
- Right-side layout for fast, natural access
- 7 pockets & holders including safety glasses pocket with Velcro® flap
- Fastener pouch with closure keeps small items contained
- Includes Oxy Tool Shield for sharp tool protection
- Weight: 0.83 lbs
- Overall Dimensions: 17" x 7" x 3.5"
- Glasses Holder: 3" x 6" x 1.5"
- Pouch with Closure: 5.5" x 4.5" Deep
- Pockets/Tool Holders: 7
- Made in the USA
More About Occidental Leather 8575 Clip-On Stronghold Insta-Vest Gear Pockets (right side)
Occidental Leather 8575 Description
The Stronghold® Clip-On Insta-Vest™ Gear Pockets (right side) adds organized storage to Stronghold suspenders via a durable spring steel clip. With 7 pockets & tool holders, a dedicated safety glasses pocket with Velcro® flap, and a fastener pouch with closure, this lightweight add-on keeps frequently used items within easy reach. Made in the USA.
Occidental Leather 8575 Includes
- (1) 8575 Clip-On Stronghold Insta-Vest Gear Pockets — Right Side
- (1) Oxy Tool Shield
Occidental Leather 8575 Features
- Spring steel clip attaches to the chest strap of Stronghold suspenders
- Right-side configuration for quick access
- 7 pockets & tool holders for organized carry
- Safety glasses pocket with secure Velcro® flap
- Fastener pouch with closure
- Lightweight design at just 0.83 lbs
- Made in the USA
Occidental Leather 8575 Applications
- Add on-board storage to Stronghold suspenders
- Keep safety glasses protected and accessible
- Carry markers, bits, small tools, and fasteners
- Organize daily-use items for carpentry and jobsite tasks
Occidental Leather 8575 Installation Overview
- Open the spring steel clip on the pouch back.
- Clip onto the chest strap of Stronghold suspenders on the right side.
- Ensure the pouch is seated securely and closures operate freely.
- Load tools, glasses, and fasteners into the designated pockets.
- Verify balance and retention before use.
Occidental Leather 8575 Specifications
| Weight | 0.83 lbs |
| Overall Dimensions | 17" x 7" x 3.5" |
| Glasses Holder | 3" x 6" x 1.5" |
| Pouch with Closure | 5.5" x 4.5" Deep |
| Pockets/Tool Holders | 7 |
| Orientation | Right side |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
