Occidental Leather Tool Holsters

High Mount Hammer Holder Key Features

• High-mount profile reduces hammer swing
• 10 oz full-grain belting leather construction
• Heavy-duty 2.5 inch steel loop fits most hammers
• Fits work belts up to 3 inches wide
• Compact, comfortable carry; Made in the USA

High Mount Hammer Holder Applications

• Framing and roofing tasks
• Overhead work and ladder use
• Tight-space maneuvering
• General jobsite tool belt organization

High Mount Hammer Holder Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Position at preferred height for a high-mount carry.
3. Insert hammer through the 2.5 inch steel loop.
4. Verify secure fit and comfortable clearance while moving.

Occidental Leather 2003 Features

• Clip-on convenience for bags or pockets
• Protects tools, bags, and body from sharp edges
• Holds a chisel, knife, diagonal cutter; plus one round pencil
• Lightweight, compact, and jobsite-ready
• Made in the USA

Occidental Leather 2003 Applications

• Safe storage of sharp edge tools on the belt or in bags
• Protecting tool pouches and clothing from blade damage
• Keeping a round pencil handy alongside primary tool
• Organizing chisels, knives, and cutters for quick access

Occidental Leather 2003 Installation Overview

1. Attach the shield by clipping it to a tool bag edge or pocket.
2. Insert the primary tool into the main compartment.
3. Place a round pencil in the dedicated side slot.
4. Ensure the clip is fully seated and the tool is secure before use.

Occidental Leather 5012 Features

• Dual-layer 12 oz leather construction with steel hardware
• Plated steel rivets and stitched leather back for durability
• Reinforced steel loop accommodates most standard hammers
• Fits belts up to 3 inches wide
• Made in USA

Occidental Leather 5012 Applications

• Framing and general carpentry
• Roofing tasks requiring quick hammer access
• Sheet metal and rigging tool carry
• Daily construction work belt organization

Occidental Leather 5012 Installation Overview

1. Thread work belt through the two slots on the holder.
2. Position at preferred location on the belt.
3. Ensure the steel loop faces outward for easy tool access.
4. Insert hammer and check for secure, minimal movement.

Occidental Leather 5037 Key Features

• High mount design keeps tape measure secure and accessible
• Top grain leather construction for durability
• Holds up to a 35 ft tape or FatMax
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5037 Applications

• Carrying and securing a tape measure on a work belt
• Framing, carpentry, and general construction tasks
• Remodeling and finish work where fast tape access is needed

Occidental Leather 5037 Installation Overview

1. Thread the holder onto your work belt (up to 3 in wide).
2. Position at preferred height for access.
3. Insert tape measure into pocket with clip facing outward.
4. Verify snug fit and comfortable reach before use.

Occidental Leather 5020 Key Features

• Two tools, one footprint for belt space efficiency
• Slides easily onto standard tool belts
• 12 oz English bridle leather construction for durability
• Purpose built for pros and DIY users
• Made in USA

Occidental Leather 5020 Applications

• Carry a hammer and pliers or similar hand tool at the ready
• Carpentry and framing work on site
• General construction and remodel tasks
• Workshop and home project tool carry

Occidental Leather 5020 Installation Overview

1. Thread the holder loop onto your work belt.
2. Position at the preferred hip location.
3. Insert hammer into the metal loop.
4. Place a hand tool into the leather pocket.
5. Check clearance and adjust belt position for comfort.

Occidental Leather 5046 Features

• Clip-on design installs without removing your belt
• High-mount position reduces swing and improves mobility
• Proprietary steel belt clip fits up to 2 in belts
• Heirloom quality leather construction
• Made in USA

Occidental Leather 5046 Applications

• Secure belt carry for tape measures
• Framing and carpentry layout work
• General construction and remodeling tasks
• Tool belt organization for pros and DIY

Occidental Leather 5046 Installation Overview

1. Slide the steel clip over your belt at the desired position.
2. Seat the holster high so the tape rests securely.
3. Insert your tape measure into the holster opening.
4. Verify the clip is fully engaged and the tape is accessible.

Occidental Leather 5066 Features

• Premium full grain leather construction for long term durability
• Angled ergonomic design for improved balance and access
• Two built in holders for drill or driver bits
• Fits most cordless drills
• Available in right or left handed versions; left handed model 5066LH
• Made in the USA

Occidental Leather 5066 Applications

• Hands free carry of cordless drills on the jobsite
• Quick access drilling for framing and carpentry
• Tool organization for electricians and installers
• General construction and remodeling tasks

Occidental Leather 5066 Installation Overview

1. Slide holster onto your work belt at the preferred position.
2. Adjust placement for comfortable angled access.
3. Secure the retention strap snap if desired.
4. Insert drill fully; place bits in the dedicated holders.
5. Test movement to ensure secure, unobstructed access.

Occidental Leather 5040 Key Features

• Quality leather and steel construction for durability
• Clip-on design allows quick on and off installation
• Spring steel clip fits belts up to 2 in wide
• Heavy-duty steel loop accommodates most hammers
• Made in USA

Occidental Leather 5040 Applications

• Keep a hammer secured to your belt for fast access
• Ideal for framing, carpentry, and general construction
• Convenient tool carry when working on ladders or overhead

Occidental Leather 5040 Installation Overview

1. Slide the spring clip onto your work belt.
2. Confirm the clip is fully seated and secure.
3. Place the hammer head through the steel loop.
4. Position for comfortable reach and adjust as needed.
5. Lift the clip to remove the holder when finished.

Occidental Leather 5047 Key Features

• Combo layout holds utility knife, two pencils, and a tape measure
• Accepts 35 ft tape or 25 ft FatMax; works as a chalk line holster
• Streamlined, lightweight design for finish work and tight spaces
• Rugged leather construction; riveted for durability
• Fits belts up to 3 inches wide; made in USA

Occidental Leather 5047 Applications

• Finish carpentry and punch list tasks
• Carrying tape, knife, and pencils for quick measurements and marking
• Chalk line holstering for layout work
• Streamlining tool access on compact belt setups

Occidental Leather 5047 Installation Overview

1. Slide the holder onto a belt up to 3 inches wide.
2. Seat the tape measure in the front pocket; remove the tape clip if needed for proper fit.
3. Allow leather to break in for snug, secure seating.
4. Insert utility knife and two pencils into their sleeves.
5. Verify comfortable placement and retention before use.

Occidental Leather 5137 Key Features

• High mount belt design for better mobility
• Extra Large fit for 35 ft FatMax style tape measures
• Premium durable leather construction
• Fits belts up to 3 in wide
• Made in USA

Occidental Leather 5137 Applications

• Daily tape measure carry on tool belts
• Framing and layout tasks
• General carpentry and jobsite measuring

Occidental Leather 5137 Installation Overview

1. Slide holster onto a belt up to 3 in wide and position at desired height.
2. Insert tape measure into the holster with the base aligned to the cutout.
3. Confirm secure fit and accessibility before use.

Occidental Leather 5545 Key Features

• Accepts nail strips up to 16D size
• Heavy belting leather construction
• Holds up to 8 racks
• Fits belts up to 3 inches wide
• Made in the USA

Occidental Leather 5545 Applications

• Keep nail strips at hand for faster nail gun reloads
• Organize collated nails while framing, roofing, or decking
• Reduce trips to refill fasteners on the jobsite

Occidental Leather 5545 Installation Overview

1. Thread the holster onto your work belt (up to 3 inch width).
2. Load collated nail strips into the pouch.
3. Position for preferred hand access and begin work.

Occidental Leather 5328 Key Features

• Made in the USA
• 10 oz Latigo belting leather construction
• Heavy-duty spring steel belt clip
• Italian-style drop clasp
• Clips to belts up to 2 inches wide
• Sized for larger smartphones (iPhone Plus and similar)

Occidental Leather 5328 Applications

• Keep smartphones secure and accessible on the jobsite
• Belt-mounted carry for larger phones
• Protection from bumps, dust, and debris
• Everyday use for trades and field work

Occidental Leather 5328 Installation Overview

1. Attach the holster by clipping it to a belt up to 2 inches wide.
2. Place the phone inside the holster.
3. Close the drop clasp to secure the phone.
4. Check that the clip is fully engaged before use.

Occidental Leather 5156 Key Features

• Steel cradle style holder for secure hammer carry
• 2 in. belt slot sized for narrow belts
• Steel hardware riveted to extra heavy leather back
• Compatible with 2 in. Leather Work Belt 5002 and Stronghold Beltless rear strap
• Made in the USA

Occidental Leather 5156 Applications

• Secure hammer carry on 2 in. belts
• Framing and carpentry belt setups
• Use with beltless suspenda style rear straps
• General construction and remodeling

Occidental Leather 5156 Installation Overview

1. Thread a 2 in. belt through the two vertical slots.
2. Position holder at desired location on the belt or rear strap.
3. Tighten belt and ensure the holder sits flat against your side.
4. Insert hammer into steel cradle and check for secure fit.

Occidental Leather 5068 Key Features

• All-leather construction with reinforced stitching
• Snap closure keeps contents secure
• Belt-worn design fits 1 to 3 inch wide belts
• Compatible with Construction Master I–IV and other calculators
• Made in USA

Occidental Leather 5068 Applications

• Protecting calculators on the jobsite
• Hands-free belt carry for quick access
• Holding similarly sized devices or phones

Occidental Leather 5068 Installation Overview

1. Slide the belt loop over a 1 to 3 inch wide work belt.
2. Insert the calculator into the pouch.
3. Close the snap to secure the contents.
4. Position on belt for comfortable access.

Occidental Leather 8567 Key Features

• Right-hand layout
• Fits a 3 in belt
• Hybrid construction: industrial nylon body with leather reinforcement
• 4 pockets and holders for drill, bits, and small tools
• Compatible with select Bosch, Hitachi, Makita, and Milwaukee compact drills and drivers
• Made in USA

Occidental Leather 8567 Applications

• Hands-free carry of cordless drills and impact drivers
• Bit and small fastener organization on the belt
• Framing, punch-out, and general construction tasks

Occidental Leather 8567 Installation Overview

1. Slide the holster onto a work belt up to 3 inches wide.
2. Secure the leather strap/snaps as designed.
3. Place the drill or driver in the main pocket.
4. Store bits and small tools in the exterior sleeves.

Occidental Leather 5028 Features

• Full-grain leather construction holds shape and resists wear
• Designed for snips; fits many small hand tools
• No-swing hammer alternative for rigid carry
• Secure belt fit on belts up to 3 inches wide
• Compatible with WISS snips (M1, M2, M3; WS series)
• Handcrafted in the USA

Occidental Leather 5028 Applications

• Carry aviation snips for steel framing tasks
• Organize small hand tools on a tool belt
• Use as a rigid, low-swing hammer holder
• General jobsite tool access on belts up to 3 inches

Occidental Leather 5028 Installation Overview

1. Slide the holster onto a belt up to 3 inches wide.
2. Position at preferred carry location.
3. Insert snips or tool fully into the pocket.
4. Verify secure fit before use.

Occidental Leather 5032 Key Features

• All-leather, USA-made construction for durability
• Versatile fit for bull pins or nail bars
• Tapered pocket helps retain tools and reduce swing
• Slides onto belts up to 3 in wide
• Riveted and stitched for added strength
• Compact design for comfortable all-day wear
• Available in OxyRed and OxyBlack

Occidental Leather 5032 Applications

• Carry and secure an ironworker bull pin
• Belt holster for nail bars and similar prying tools
• Hands-free access during steel erection and layout
• Organize tools on construction and trade job sites
• Minimize tool swing while climbing or moving

Occidental Leather 5032 Installation Overview

1. Thread the holster onto a work belt up to 3 in wide.
2. Position on preferred side for quick access.
3. Insert bull pin or nail bar into the tapered pocket.
4. Ensure the tool is seated fully and retained securely.
5. Recheck fit after first use and adjust belt position if needed.

Occidental Leather 5518 Features

• Long sleeve style keeps tools upright and close to the body
• Reduces tool swing to avoid knee capping
• Heavy duty full leather construction
• Fits belts up to 3 in wide
• Made in the USA

Occidental Leather 5518 Applications

• Carry and secure framing or finish hammers
• Holster for hammer tackers on the jobsite
• Flat bar storage up to 1-5/8 in diameter
• Reduce tool sway while climbing or walking
• Add a hammer sleeve to any 3 in belt

Occidental Leather 5518 Installation Overview

1. Slide the holder onto a work belt up to 3 in wide.
2. Position the sleeve where the tool is easy to reach.
3. Insert the hammer, tacker, or flat bar handle into the sleeve.
4. Confirm the tool sits securely and does not swing.
5. Tighten belt as needed for stable carry.

Occidental Leather 6568 Key Features

• All leather construction for durability
• Secure snap closure
• Clip on design for belt or pocket carry
• Fits Construction Master models I, II, III, IV and other brands
• Also available as belt worn model 5068
• Made in USA

Occidental Leather 6568 Applications

• Protecting calculators on the jobsite
• Hands free carry clipped to belt or pocket
• Field measurements and quick calculations
• Organized storage in tool belts and bags

Occidental Leather 6568 Installation Overview

1. Insert calculator into the case.
2. Close the snap to secure.
3. Attach the clip to belt or pocket edge.
4. Check that the case is seated firmly before use.

Occidental Leather 8505 Features

• Clip-on mount attaches to belt or pocket for quick access
• 4 tool pockets sized for knife, pencils, and 35 ft tape
• FatMax compatible tape pocket
• Ultra-lightweight at 0.2 lbs for all-day comfort
• Durable nylon with leather reinforcement; made in USA

Occidental Leather 8505 Applications

• Carry and organize measuring tape, utility knife, and pencils
• Quick tool access on belt or pocket during layout and marking
• Jobsite or shop use where compact organization is needed

Occidental Leather 8505 Installation Overview

1. Clip the holder onto your belt or pocket.
2. Place tape measure, knife, and pencils into designated pockets.
3. Confirm the clip is secure and pockets are seated.
4. Adjust tool placement for comfortable reach.

Occidental Leather 5013 Key Features

• Holds most pliers and side cutters
• Ideal for Felco and other pruning shears
• Durable leather construction with closed bottom
• Fits belts up to 3 in. wide
• Made in USA

Occidental Leather 5013 Applications

• Carry pruning shears for landscaping and gardening
• Keep pliers or side cutters accessible on the jobsite
• Organize everyday tools on a work belt

Occidental Leather 5013 Installation Overview

1. Slide the holster onto a belt up to 3 in. wide.
2. Seat the tool fully into the pocket.
3. Confirm the holster sits securely and does not obstruct movement.

Occidental Leather 5025 Features

• Fits pliers, side cutters, crimpers, and plumb bobs
• Open-bottom design for longer tools and debris release
• Full-grain leather construction for durability
• Compact profile with minimal bulk on belt
• Made in the USA

Occidental Leather 5025 Applications

• Keep pliers and cutters accessible on the job
• Hold plumb bobs for surveying and layout work
• Organize essential hand tools on a work belt
• Daily use for electricians, framers, and general trades

Occidental Leather 5025 Installation Overview

1. Thread holster onto your work belt and position as desired.
2. Insert tool fully into the holster.
3. Confirm secure fit and comfortable access before use.

Occidental Leather 8574 Key Features

• Clip-on leather holster for phones
• Velcro closure to fit many phone sizes
• Heavy duty elastic sides expand up to 1-1/2 in
• 2 in spring steel belt clip for secure attachment
• Made in USA

Occidental Leather 8574 Applications

• Everyday belt carry for standard size smartphones
• Jobsite phone protection with secure closure
• Hands-free access while working or commuting
• Clips to belts or waistbands up to 2 in wide

Occidental Leather 8574 Installation Overview

1. Slide the spring steel clip over your belt or waistband.
2. Place your phone inside the pocket.
3. Close the flap and press the Velcro to secure.
4. Confirm the elastic sides hold the phone snugly.
5. Check access and adjust position as needed.

Occidental Leather 8068 Features

• Two-compartment main bag with drill/screw gun holster
• Patented 2 in 1 outer pouch adds storage without bulk
• Right-side layout; square edge to the rear
• Holders for driver bits and pencil
• Leather sleeve for Clip-On accessories
• Rafter square slot behind outer pouch
• Pocket and tool holders: 9
• Weight: 1.25 lbs
• Made in the USA

Occidental Leather 8068 Applications

• Metal framing and stud work tool carry
• Organizing drill, bits, and quick-release clamps
• Keeping rafter square accessible on belt
• Right-side belt-mounted storage for cordless tools

Occidental Leather 8068 Installation Overview

1. Slide bag onto a work belt up to 3 in wide.
2. Position on the right side with square edge to rear.
3. Seat drill or screw gun in the holster.
4. Load bits, pencil, and clamps into designated pockets.
5. Place rafter square in the rear slot and check balance.