Sort by:
Occidental Leather 8068 Description
Right-side drill and screw gun bag with a compact two-compartment main body. Features a dedicated holster for cordless drills or screw guns, a 2 in 1 outer pouch, holders for driver bits and pencil, a leather sleeve for Clip-On items, and a rafter square slot behind the outer pouch. Made in the USA.
Occidental Leather 8068 Includes
- (1) Occidental Leather 8068 Impact / Screw Gun and Drill Bag
Occidental Leather 8068 Features
- Two-compartment main bag with drill/screw gun holster
- Patented 2 in 1 outer pouch adds storage without bulk
- Right-side layout; square edge to the rear
- Holders for driver bits and pencil
- Leather sleeve for Clip-On accessories
- Rafter square slot behind outer pouch
- Pocket and tool holders: 9
- Weight: 1.25 lbs
- Made in the USA
Occidental Leather 8068 Applications
- Metal framing and stud work tool carry
- Organizing drill, bits, and quick-release clamps
- Keeping rafter square accessible on belt
- Right-side belt-mounted storage for cordless tools
Occidental Leather 8068 Installation Overview
- Slide bag onto a work belt up to 3 in wide.
- Position on the right side with square edge to rear.
- Seat drill or screw gun in the holster.
- Load bits, pencil, and clamps into designated pockets.
- Place rafter square in the rear slot and check balance.
Occidental Leather 8068 Specifications
| Pocket & Tool Holders | 9 |
| Weight | 1.25 lbs |
| Material | Leather/Nylon Hybrid |
| Side | Right |
| Belt Fit | Up to 3 in width |
| Overall Height | 12.5 in |
| Main Compartment (approx.) | 11.25 x 2.75 x 8 in |
| Hanger Width | 7.25 in top, 8-7/8 in bottom |
| GTIN | 759244318203 |
| Country of Origin | USA |
Occidental Leather 6530 Description
Keep your 2.5 in can close at hand with this rugged chew and dip can holster. Made from full-grain OxBlood leather with a sturdy 2 in steel belt clip, it attaches securely to belts or waistbands for quick access on the job or on the go. Embossed Occidental Leather logo.
Occidental Leather 6530 Includes
- (1) Chew Can Holster
Occidental Leather 6530 Features
- Designed for standard 2.5 in round chew or dip cans
- 2 in proprietary steel belt clip; fits belts or waistbands up to 2 in wide
- Full-grain leather construction in classic OxBlood red
- Embossed Occidental Leather logo
- Made in USA
Occidental Leather 6530 Applications
- Jobsite carry for chew or dip cans
- Framing, welding, and general trades work
- Everyday belt or waistband accessory
- Walking the site while keeping hands free
Occidental Leather 6530 Installation Overview
- Slide the steel clip onto a belt or waistband up to 2 in wide.
- Insert the 2.5 in can into the leather holster.
- Check retention and adjust holster position for easy access.
- Remove the holster by lifting the clip and sliding off the belt.
Occidental Leather 6530 Specifications
| Material | Full-grain leather |
| Color | OxBlood red |
| Clip | 2 in proprietary steel belt clip |
| Compatibility | Fits standard 2.5 in round chew/dip cans |
| Attachment | Clips to belts or waistbands up to 2 in wide |
| Weight | 0.1 lb |
| Country of Origin | USA |
Occidental Leather 5237 Description
Specifically designed for the 35 ft FatMax, this high-mount, clip-on extra large tape holster offers quick, easy access and secure carry on your belt. Premium leather construction with a rugged steel clip keeps your tape within reach all day.
Occidental Leather 5237 Includes
- (1) Clip-On Tape Holster - Extra Large
Occidental Leather 5237 Key Features
- High-mount, clip-on design installs without removing your belt
- Sized to fit 35 ft FatMax tape measures
- Proprietary steel belt clip fits belts up to 2 inches wide
- Heirloom-quality leather for long-lasting durability
- Made in USA
Occidental Leather 5237 Applications
- Secure belt carry for 35 ft tape measures on the jobsite
- Fast access measuring for framing, trim, and general carpentry
- Upgrade or replacement holster for tool belts and work pants
Occidental Leather 5237 Installation Overview
- Slide or clip the steel clip over your belt (up to 2 inches wide).
- Position the holster high on the belt for reduced swing.
- Insert the tape measure into the pouch opening until fully seated.
- Check retention and adjust holster position for comfort.
- Remove by lifting the clip tab and sliding off the belt.
Occidental Leather 5237 Specifications
| Material | Leather |
| Size | XL |
| Color | Oxy Red |
| Compatibility | Fits 35 ft FatMax tape measures |
| Belt Compatibility | Fits up to 2 inch wide belts |
| Clip Material | Proprietary steel belt clip |
| Country of Origin | USA |
Occidental Leather 5066LH Description
All leather, heavy duty angled holster designed for left-handed users. The 5066LH improves balance and comfort, fits most cordless drills, and provides two holders for drill or driver bits.
Occidental Leather 5066LH Includes
- (1) 5066LH Left Handed Cordless Drill Holster
Occidental Leather 5066LH Key Features
- Left-handed configuration; wears on right side
- All leather construction for long-term durability
- Angled body for better balance and comfort
- Two holders for drill or driver bits
- Fits most cordless drills; accepts belts up to 3 in.
- Made in the USA
Occidental Leather 5066LH Applications
- Hands-free carry of cordless drills on the jobsite
- Quick access to drill and driver bits
- Left-handed setup for carpentry, framing, and finish work
Occidental Leather 5066LH Installation Overview
- Slide holster onto a work belt up to 3 in. wide.
- Secure the retention strap as needed.
- Insert cordless drill into the angled pocket.
- Store driver bits in the integrated bit holders.
Occidental Leather 5066LH Specifications
| Pockets and Tool Holders | 3 |
| Material | Premium leather |
| Weight | 0.6 lbs |
| Belt Width | Up to 3 in |
| Overall Height | 9 in |
| Overall Width | 5 in |
| Overall Depth | 5 in |
| Handedness | Left |
| Country of Origin | USA |
Showing 28/28
