Occidental Leather Tool Belt Systems

Key Features

• 21 pockets and tool holders
• Hand specific tool holder layout
• Padded two ply tool bags keep their shape
• Extremely abrasion resistant industrial nylon with leather reinforcement
• Made in USA

Applications

• Framing and rough carpentry
• General construction and remodeling
• Jobsite fastener and hand tool organization
• Production carpentry requiring high capacity storage

Installation Overview

1. Select size Large; mid range fit is 41 in. with 4 in. adjustment each way.
2. Thread the pouches onto the 3 in. Ranger belt and position for dominant hand.
3. Secure the High Mount Hammer Holder at the rear center.
4. Load tools and fasteners; balance weight across both bags.
5. Buckle belt using one of 9 holes; ensure snug, comfortable fit.

Occidental Leather B5080DB XXL Key Features

• Premium top grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand specific tool holder placement for workflow
• Copper rivets reinforce main bags
• Built in tape holster, fits tapes up to 30 ft
• Made in USA

Occidental Leather B5080DB XXL Applications

• Framing and general carpentry
• Jobsite tool and fastener organization
• Efficient workflow for right or left handed setups
• Daily use in outdoor construction environments

Occidental Leather B5080DB XXL Installation Overview

1. Measure your current tool belt from buckle end to used hole to confirm size.
2. Wear over typical work clothing and adjust to a comfortable midpoint hole.
3. Place tool bag on dominant hand side and fastener bag opposite.
4. Load tools and tapes into designated holders; confirm secure fit.
5. Check rivets and seams periodically for wear and re-tighten belt as needed.

Occidental Leather 2580 Key Features

• Maximum comfort with wide padded shoulder yoke lined with Dri-Lex for moisture control
• Even load distribution reduces back fatigue and increases carry efficiency
• Fully adjustable straps; one size fits most
• Quick release chest buckle for fast on/off
• Heavy-duty storage D-ring for hanging
• 36 pockets and tool holders for organized access
• Made in USA

Occidental Leather 2580 Applications

• Framing tasks requiring balanced tool carry
• Electrical installations and service work
• Concrete forming and layout
• Trim carpentry and finish work

Occidental Leather 2580 Installation Overview

1. Adjust shoulder straps and side straps for a comfortable fit.
2. Attach included tool and fastener bags to the leather belting.
3. Secure the chest buckle; verify even weight distribution.
4. Load essential tools into pockets and holders.
5. Use the D-ring to hang the vest when storing off the clock.

Occidental Leather B5135 LG Key Features

• 5 in wide belt provides added back support
• Suspender attachment loops for optional load distribution
• Thick padded, moisture wicking interior for comfort
• Heavy duty buckles and belt loops minimize bag sliding
• 2 in all leather overbelt keeps pouches stable
• Nickel plated steel hardware; edge stitched for strength
• Handcrafted in the USA

Occidental Leather B5135 LG Applications

• Carrying and stabilizing tool pouches on the jobsite
• Reducing lower back strain during all day wear
• Use with suspenders for added weight distribution
• General construction, carpentry, electrical, and finish work

Occidental Leather B5135 LG Installation Overview

1. Select correct size; position belt around waist over work pants.
2. Thread tool bags onto the overbelt and place in desired positions.
3. Buckle the belt and tighten to a comfortable, secure fit.
4. Attach suspenders to the loops if using for extra support.
5. Recheck fit and adjust pouch spacing as needed.

Occidental Leather 8585M Key Features

• Hand specific tool holders for efficient layout
• Padded two ply bags hold shape under load
• Industrial nylon with leather holders and reinforced corners
• Leather FatLip mouth keeps the bag formed and protected
• Full leather boot for rugged wear
• Left handed version available as 8585LH
• Made in USA

Occidental Leather 8585M Applications

• Carpentry and framing tool organization
• Jobsite fastener and small parts carry
• Daily use for production builders
• General construction tool storage
• Remodeling and trim work setups

Occidental Leather 8585M Installation Overview

1. Lay your current belt flat and measure from buckle end to your most used hole.
2. Select Medium if the mid range near 37 in. matches your measurement.
3. Adjust using the 9 holes to fine tune fit across 4 in. of range each way.
4. Attach bags and hammer holder to preferred positions.
5. Load tools and confirm balance and comfort before use.

Occidental Leather 5089LHLG Key Features

• Premium top grain leather construction for durability
• Seven pouch layout for high capacity organization
• NoSpill tool holder system for secure, efficient access
• Copper rivet reinforcements on main bags
• 12 oz belting leather with steel roller buckle
• Made in USA

Occidental Leather 5089LHLG Applications

• Framing and rough carpentry
• Jobsite tool and fastener carrying
• Production carpentry setups requiring maximum pouch capacity
• Left handed tradespeople needing optimized layout

Occidental Leather 5089LHLG Installation Overview

1. Measure your current tool belt per manufacturer sizing guide and select Large.
2. Adjust the HD Ranger belt to fit over typical work clothing.
3. Position the tool bag on the left and fastener bag on the right for left handed use.
4. Load tools and fasteners into dedicated pockets to balance weight.
5. Secure hammer in holder and verify comfortable reach to primary tools.

Occidental Leather 8003M Key Features

• 3" wide padded industrial nylon belt body for support and comfort
• 2" heavy leather tongue with nickel plated steel roller buckle
• Lightweight construction helps reduce fatigue
• Compatible with most tool and fastener bags and suspenders
• Edge stitched for durability and appearance
• Made in USA

Occidental Leather 8003M Applications

• Foundation belt for carrying tool and fastener bags
• Use with suspenders for added load distribution
• General jobsite wear where comfort and support are needed

Occidental Leather 8003M Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole to confirm size.
2. Select Medium if your mid range measurement is about 37".
3. Thread the leather tongue through the buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags and optional suspenders.
5. Adjust fit as needed for clothing layers.

Occidental Leather 2500 Features

• Wide padded shoulder support lined with Dri Lex for comfort
• Fully adjustable straps for a personalized fit
• Even load distribution to reduce fatigue
• 17 pockets and holders to minimize tool clutter
• Quick release chest strap buckle for fast on off
• Heavy duty D ring for hanging storage

Occidental Leather 2500 Applications

• Framing tasks where balanced tool carry is needed
• Electrical work requiring quick access to hand tools
• Concrete work and general construction
• Trim and finish work in tight spaces

Occidental Leather 2500 Installation Overview

1. Adjust shoulder straps and chest buckle for a comfortable fit.
2. Attach compatible tool bags to the 3 inch leather belting as needed.
3. Load tools evenly across pockets to balance weight.
4. Snap the chest strap buckle to secure the vest.
5. Use the D ring for hanging storage when not in use.

Occidental Leather 5135 XXL Key Features

• 5 in. wide belt for enhanced back support
• Built-in suspender attachment loops
• Thick padded wool liner for comfort and moisture control
• Heavy duty buckles and belt loops minimize bag sliding
• Edge stitched leather for added strength

Occidental Leather 5135 XXL Applications

• Securely carry tool bags and pouches
• Provide back support during long workdays
• Use with suspenders for balanced load distribution
• Carpentry, framing, and general construction tasks
• Comfortable wear over layered work clothing

Occidental Leather 5135 XXL Installation Overview

1. Measure your current tool belt from buckle end to the hole you use.
2. Select size based on midpoint measurement; size up if between.
3. Wear over typical work clothing and fasten at the midpoint hole.
4. Attach tool bags to the overbelt loops; tighten to prevent sliding.
5. Clip suspenders to built-in loops for added support if needed.

Occidental Leather 8580M Features

• Hand-specific tool holder layout for efficient workflow
• Padded two-ply bags maintain shape when empty or loaded
• Extremely abrasion-resistant industrial nylon exterior
• Full leather boot with distinctive FatLip leather mouth
• 3 in HD Ranger belt with rear 2-in-1 tool and hammer holder
• Pockets and tool holders: 25
• Made in USA

Occidental Leather 8580M Applications

• Framing and production carpentry
• General carpentry and remodeling
• Jobsite organization for tools and fasteners
• Finish work requiring hand-specific pouch layout

Occidental Leather 8580M Installation Overview

1. Put on the belt over your typical work clothing and note the hole you use.
2. Remove the belt, lay it flat, and measure from the end of the buckle to that hole.
3. Select Medium if your measurement is near 37 in; adjust using the midpoint hole for fit.

Occidental Leather 9515 Features

• Adjustable fit for pant waist 32 to 41
• Fixed bag design prevents shifting
• D rings pre-installed for suspender attachment
• Padded two-ply bags hold their shape
• Extremely abrasion-resistant industrial nylon
• Leather tool holders and corner reinforcement
• Includes High Mount Hammer Holder 5059
• Hand-specific tool placement for efficient workflow
• Left-handed model available as 9515LH

Occidental Leather 9515 Applications

• Framing and rough carpentry
• Jobsite tool and fastener organization
• Use with suspender systems via pre-installed D rings
• Seasonal gear changes requiring belt size adjustment
• Daily professional construction work

Occidental Leather 9515 Installation Overview

1. Measure where you wear your tool belt and set belt size to fit 32 to 41 pant waist.
2. Position tool bag on dominant side and fastener bag on opposite side.
3. Secure the belt and lock the adjust-to-fit crossover system.
4. Attach the removable hammer holder and any suspenders to D rings.
5. Load tools and fasteners; confirm bags are fixed and balanced.

Occidental Leather 9850 Key Features

• FatLip leather mouth stays open and resists abrasion
• Main bags are 10 in deep with full leather boot
• Adjust-to-Fit belt for 32 in to 41 in waist sizes
• Rear 2-in-1 Tool and Hammer Holder
• Includes Oxy Tool Shield for sharp tool protection
• 24 total pockets and tool holders
• Crafted from high density neoprene, rugged nylon, and full grain leather
• Made in the USA

Occidental Leather 9850 Applications

• Carpentry and framing tool organization
• Remodeling and general construction tasks
• Jobsite fastener and hand tool carry
• Use with suspenders via preinstalled D-rings

Occidental Leather 9850 Installation Overview

1. Measure where you wear your tool belt to confirm size.
2. Adjust the belt to fit 32 in to 41 in waist range.
3. Position tool and fastener bags to your handed layout.
4. Attach the 2-in-1 holder and Oxy Tool Shield as desired.
5. Check D-rings and belt security before use.

Occidental Leather 8089 SM Key Features

• Hand specific tool holder layout
• Padded two ply bags keep their shape
• Industrial nylon is highly abrasion resistant
• Leather tool holders and corner reinforcement
• Made in USA

Occidental Leather 8089 SM Applications

• Framing and general carpentry
• Organizing fasteners and small tools
• Efficient hand specific tool access
• Jobsite carry for hammers, squares, and pliers

Occidental Leather 8089 SM Installation Overview

1. Measure and select the correct belt size and position on waist.
2. Attach tool and fastener bags to the belt in preferred left or right layout.
3. Secure the hammer holder and any clip on accessories.
4. Load tools and fasteners into designated pockets.
5. Adjust belt fit for comfort and check all rivets and straps.

Occidental Leather 5135 LG Key Features

• 5 in wide belt for back support
• Suspender attachment loops pre-installed
• Thick padded interior for comfort and moisture control
• Heavy-duty buckles and belt loops minimize bag movement
• Edge-stitched leather construction
• Made in USA

Occidental Leather 5135 LG Applications

• Daily wear with Occidental tool bags and systems
• Added back support for heavy tool loads
• Suspender-compatible setups for long shifts
• Carpentry, framing, electrical, and general construction

Occidental Leather 5135 LG Installation Overview

1. Measure an existing tool belt from buckle tip to your used hole to confirm size.
2. Select Large (41 in mid range) and adjust using the 9-hole range.
3. Attach tool bags to the overbelt and secure using belt loops.
4. Connect suspenders to the attachment loops as needed.
5. Check fit and tighten buckles to prevent sliding.

Key Features

• Wide 5 in belt for enhanced back support
• Suspender attachment loops
• Thick padded interior for comfort and moisture wicking
• Heavy-duty buckles and belt loops minimize bag sliding
• 2 in all-leather overbelt; edge-stitched for strength
• Made in the USA

Applications

• Supporting tool bags and pouches on the jobsite
• Use with suspenders via integrated attachment loops
• Comfortable heavy-duty belt for framing, finish, or general carpentry

Installation Overview

1. Put the belt on over typical work clothing where you will wear it.
2. Measure from the buckle to the hole you use; that measurement is your belt size.
3. Select size XL (approx. 45 in belt size) and adjust using the 9-hole range.
4. Attach tool bags to the overbelt and secure through the belt loops.
5. Clip suspenders to the attachment loops if desired and check fit.

Occidental Leather B5625 SM Key Features

• Premium top-grain leather construction
• Side-by-side upper bag and tape mount for quick access
• Hand-specific tool holders for efficient workflow
• NoSpill holder system helps keep tools secure
• Reinforced back walls at stress points for durability
• Made in the USA

Occidental Leather B5625 SM Applications

• Framing and rough carpentry
• General construction and remodeling
• Jobsite tool and fastener organization
• Daily professional use in demanding conditions

Occidental Leather B5625 SM Installation Overview

1. Measure your current tool belt at the hole you use to fasten it.
2. Match the measurement to the size chart; size up if between sizes.
3. Load tools into hand-specific pockets and adjust belt to midpoint hole.
4. Attach hammer holder and Oxy Tool Shields as preferred.
5. Confirm comfort and balance; fine-tune position of bags on the belt.

Occidental Leather 8080DB M Key Features

• 21 pockets and tool holders for organized carry
• Hand specific tool holder layout for efficiency
• Padded two ply nylon bags hold shape
• Industrial abrasion resistant nylon
• Leather tool holders with corner reinforcement
• Made in USA

Occidental Leather 8080DB M Applications

• Framing and general carpentry tool organization
• On site fastener and tool access for construction
• Deck building and exterior trim projects
• Remodeling tasks requiring multi tool carry

Occidental Leather 8080DB M Installation Overview

1. Select Medium size; thread belt through both bags and hammer holder.
2. Position tool bag on your dominant hand side; fastener bag opposite.
3. Buckle belt and adjust fit using belt holes for comfortable support.
4. Load tools and fasteners into dedicated pockets and holders.
5. Verify balance and accessibility; re adjust as needed.

Occidental Leather B5135 M Key Features

• Wide 5 in. belt for added lower back support
• Suspender attachment loops
• Thick padded interior for comfort and moisture wicking
• 2 in. leather overbelt plus heavy duty buckles and belt loops minimize bag sliding
• Handcrafted in the USA from premium Latigo leather

Occidental Leather B5135 M Applications

• Support and stabilize tool bags and pouches on the job
• Use with suspenders for added load distribution
• Daily wear for construction, carpentry, electrical, and trades
• Upgrading comfort on existing Occidental Leather systems

Occidental Leather B5135 M Installation Overview

1. Measure an existing work belt or measure from buckle to the hole you use to confirm size.
2. Thread tool bags onto the 2 in. overbelt as desired.
3. Position the belt at working height and buckle to a comfortable hole.
4. Attach suspenders to the loops if used and adjust for balance.
5. Reposition bags so weight is centered and movement is minimized.

Occidental Leather 9855LH Features

• Adjust-to-Fit belt for pant waist 32 in to 41 in
• D rings pre installed for suspenders
• FatLip bag design with structured mouth
• Hand specific tool holders for improved rhythm
• Rear 2 in 1 tool and hammer holder; includes Oxy Tool Shield
• Made in USA

Occidental Leather 9855LH Applications

• Production carpentry tool carry and organization
• Framing and layout work
• General jobsite fastening and measuring tasks
• Use with suspension systems for extended wear

Occidental Leather 9855LH Installation Overview

1. Measure and adjust belt to fit within 32 in to 41 in range.
2. Position tool and fastener bags for left handed layout.
3. Attach hammer holder and accessories to belt loops.
4. Load tools and fasteners; confirm balanced carry.
5. Optionally connect suspenders to pre installed D rings.

Occidental Leather B5055 Features

• Even load distribution to relieve hip and lower back strain
• Padded, contoured yoke with sweat-wicking lining
• Secure fit keeps straps from wandering off shoulders
• Tool-friendly chest pockets on both sides
• Heavy-duty center D ring for hanging your rig
• Leather loop attachment system fits up to a 3 in. belt
• Made in USA

Occidental Leather B5055 Applications

• Support and stabilize heavy tool belts during daily use
• Reduce lower back and hip fatigue on framing and carpentry jobs
• Keep rigs balanced when carrying bulky tools and fasteners
• Quickly hang up complete belt systems between tasks

Occidental Leather B5055 Installation Overview

1. Attach leather loops to your tool belt (up to 3 in. width).
2. Connect front clips and set the chest strap to a comfortable tension.
3. Adjust strap lengths for even weight distribution.
4. Check shoulder yoke alignment and secure fit before use.
5. Use the center D ring to hang the rig when removing.

Occidental Leather 5135 XL Key Features

• Wide 5 in belt enhances back support
• Suspender attachment loops pre-installed
• Thick padded interior for comfort and moisture control
• Heavy duty buckles and belt loops minimize bag sliding
• Edge stitched leather construction
• Made in USA

Occidental Leather 5135 XL Applications

• Supporting tool bags for carpentry and construction
• Improving lower back support during long work days
• Use with suspenders for added load distribution
• Jobsite wear requiring durable leather work belts

Occidental Leather 5135 XL Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole.
2. Select the size closest to that mid-range measurement.
3. Put the belt on over normal work clothes and adjust to comfort.
4. Attach suspenders to the built-in loops if desired.
5. Secure tool bags to the overbelt and verify they do not slide.

Key Features

• 20 pockets and tool holders
• Hand specific tool organization
• Padded two ply bags hold their shape under load
• Industrial nylon with leather tool holders and corner reinforcement
• Right side gun holster for impact or screw guns
• Made in USA

Applications

• Metal stud framing and fastening
• Finish carpentry and trim installation
• Remodeling and punch list tasks
• General layout and fastening work

Installation Overview

1. Measure and select the correct belt size for over garment wear.
2. Thread the work belt through the bags and holders in preferred positions.
3. Secure the hammer holder and accessories to the belt.
4. Adjust the belt for a snug, balanced fit at the midpoint hole.
5. Load tools and fasteners; verify balanced weight and accessibility.

Occidental Leather B5625 XL Features

• Lightweight all-leather set; no break-in required
• Premium top-grain leather in classic black
• Hand-specific tool holders for efficient workflow
• NoSpill holder system keeps tools secure
• Reinforced back walls at stress points for durability
• Side-by-side upper bag and tape mount for quick access
• Made in the USA

Occidental Leather B5625 XL Applications

• Framing and general carpentry
• Fastener and hand tool organization on the jobsite
• Layout and measuring with tape and square access
• Daily professional construction use

Occidental Leather B5625 XL Installation Overview

1. Measure your current tool belt where you wear it over work clothes.
2. Note the buckle hole used, then measure from buckle end to that hole to confirm XL fit.
3. Arrange fastener and tool bags on the belt; position holders as preferred.
4. Buckle at the midpoint hole and adjust for comfort and balance.
5. Load tools, placing frequently used items in the hand-specific holders.

Occidental Leather 5191XL Key Features

• Unique one-piece tool belt assembly for balanced load distribution
• Premium top-grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper-riveted main bags for durability
• NoSpill tool holder system keeps tools secure
• Sheepskin-lined interior for comfort
• Made in USA
• Not available as left-hand model; suggested 9550LH

Occidental Leather 5191XL Applications

• Framing and general carpentry
• Remodeling and residential construction
• Jobsite tool organization and carry
• Finish carpentry tool layout

Occidental Leather 5191XL Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove the belt and measure from the buckle end to that hole to confirm size.
3. Adjust fit using midpoint hole; 4 inches of adjustment each way.
4. Load tools into hand-specific holders; secure sharp tools in dedicated holsters.
5. Verify balanced weight before use.