Occidental Leather Accessories

Occidental Leather 5055P Key Features

• Replacement shoulder pad for Stronghold Suspension System
• Ambidextrous design fits left or right shoulder
• Industrial nylon construction for long service life
• Made in USA

Occidental Leather 5055P Applications

• Replace worn or damaged pad on the 5055 Stronghold system
• Improve comfort during extended tool belt use
• Configure suspension setup for left or right shoulder wear

Occidental Leather 5055P Installation Overview

1. Remove the existing shoulder pad from the 5055 system.
2. Position the replacement pad on the desired shoulder side.
3. Attach using the system hardware per manufacturer guidance.
4. Adjust straps for a secure and comfortable fit.
5. Verify movement and load distribution before use.

Occidental Leather 5237 Key Features

• High-mount, clip-on design installs without removing your belt
• Sized to fit 35 ft FatMax tape measures
• Proprietary steel belt clip fits belts up to 2 inches wide
• Heirloom-quality leather for long-lasting durability
• Made in USA

Occidental Leather 5237 Applications

• Secure belt carry for 35 ft tape measures on the jobsite
• Fast access measuring for framing, trim, and general carpentry
• Upgrade or replacement holster for tool belts and work pants

Occidental Leather 5237 Installation Overview

1. Slide or clip the steel clip over your belt (up to 2 inches wide).
2. Position the holster high on the belt for reduced swing.
3. Insert the tape measure into the pouch opening until fully seated.
4. Check retention and adjust holster position for comfort.
5. Remove by lifting the clip tab and sliding off the belt.

Occidental Leather 6530 Features

• Designed for standard 2.5 in round chew or dip cans
• 2 in proprietary steel belt clip; fits belts or waistbands up to 2 in wide
• Full-grain leather construction in classic OxBlood red
• Embossed Occidental Leather logo
• Made in USA

Occidental Leather 6530 Applications

• Jobsite carry for chew or dip cans
• Framing, welding, and general trades work
• Everyday belt or waistband accessory
• Walking the site while keeping hands free

Occidental Leather 6530 Installation Overview

1. Slide the steel clip onto a belt or waistband up to 2 in wide.
2. Insert the 2.5 in can into the leather holster.
3. Check retention and adjust holster position for easy access.
4. Remove the holster by lifting the clip and sliding off the belt.

Occidental Leather 1355 Key Features

• Five color coded pouches for quick sorting
• Durable industrial nylon construction
• Zip top closure with leather pull
• Compact 12 x 7 in size for small tools and parts
• Made in USA

Occidental Leather 1355 Applications

• Organizing small tools and accessories
• Separating fasteners, anchors, and hardware
• Storing bits, blades, and connectors
• Jobsite grab and go parts management

Occidental Leather 1355 Installation Overview

1. Load items into each pouch by category or color code.
2. Zip closed and attach together via ring or store in tool bag.
3. Grab the needed pouch on the job and return to storage after use.

Key Features

• Round-bottom full-capacity leather bags for greater storage and durability
• NoSpill hand-specific tool holder layout
• Premium top-grain leather throughout
• 3 in heavy-duty English bridle leather belt with steel roller buckle
• 28 total pockets and tool holders
• Made in the USA

Applications

• Framing and layout work
• Trim and finish carpentry
• General carpentry and remodeling
• Jobsite tool organization and carry
• Daily professional contractor use

Installation Overview

1. Measure for proper belt size per manufacturer sizing guide.
2. Adjust the 3 in belt to a comfortable, secure fit.
3. Position tool and fastener bags on preferred sides.
4. Attach the 2-in-1 holder and Oxy Tool Shield to desired locations.
5. Load tools evenly to balance weight and check all rivets and clips are secure.

Occidental Leather 5530 XXXL Key Features

• Round bottom full capacity bags for added space and durability
• NoSpill hand specific tool holder system
• Premium top grain leather construction
• 3 in heavy duty work belt made of 12 oz English bridle leather with steel roller buckle
• Function engineered for framing, trim, and general carpentry

Occidental Leather 5530 XXXL Applications

• Framing and rough carpentry setups
• Trim and finish carpentry tool organization
• General construction and remodeling
• Jobsite tool carry and protection

Occidental Leather 5530 XXXL Installation Overview

1. Measure where you wear the belt to confirm size.
2. Attach the fastener and tool bags to the belt in preferred positions.
3. Clip on the 2-in-1 tool and hammer holder to the belt center or side.
4. Load tools and adjust belt for comfort and balance.
5. Check all rivets, clips, and holders before use.

Occidental Leather 5530 XXL Key Features

• Round bottom full capacity bags for added space and durability
• NoSpill hand specific tool holder layout
• Premium top grain leather throughout
• 3 inch heavy duty English bridle leather belt with steel roller buckle
• Purpose built for framing, trim, and general carpentry
• Made in the USA

Occidental Leather 5530 XXL Applications

• Framing tasks requiring high capacity tool storage
• Trim work and finish carpentry organization
• General carpentry and remodeling
• Jobsite tool protection and quick access
• Daily professional use in demanding conditions

Occidental Leather 5530 XXL Installation Overview

1. Select correct belt size and position belt at working height.
2. Attach Big Oxy tool and fastener bags to the belt loops.
3. Clip on the Oxy Tool Shield and mount the 2 in 1 Tool and Hammer Holder.
4. Load tools into hand specific holders and adjust belt for comfort.
5. Verify secure fit and balance before use.

Occidental Leather 5066LH Key Features

• Left-handed configuration; wears on right side
• All leather construction for long-term durability
• Angled body for better balance and comfort
• Two holders for drill or driver bits
• Fits most cordless drills; accepts belts up to 3 in.
• Made in the USA

Occidental Leather 5066LH Applications

• Hands-free carry of cordless drills on the jobsite
• Quick access to drill and driver bits
• Left-handed setup for carpentry, framing, and finish work

Occidental Leather 5066LH Installation Overview

1. Slide holster onto a work belt up to 3 in. wide.
2. Secure the retention strap as needed.
3. Insert cordless drill into the angled pocket.
4. Store driver bits in the integrated bit holders.

Occidental Leather 8576 Key Features

• Clip-on design with spring steel clip for chest strap attachment
• Left-side layout for efficient access
• Padded smartphone sleeve with velcro flap
• 11 pockets and tool holders to organize essentials
• Made in the USA

Occidental Leather 8576 Applications

• Hands-free storage on Stronghold suspenders or Insta-Vest systems
• Organizing small tools, markers, and fast-access items
• Protecting and securing a smartphone on the job
• Task-ready setup for carpentry, electrical, and general trades

Occidental Leather 8576 Installation Overview

1. Open the spring steel clip on the back of the pouch.
2. Clip securely onto the chest strap of Stronghold suspenders or compatible vest.
3. Adjust position for comfort and access.
4. Load tools into pockets and holders.
5. Place phone in padded sleeve and close the velcro flap.

Occidental Leather 8575 Features

• Made in USA
• 7 pockets and tool holders
• Durable spring steel clip attaches to Stronghold suspenders chest strap
• Right-side orientation for convenient access
• Safety glasses pocket with velcro flap; fastener pouch with closure
• Includes Oxy Tool Shield

Occidental Leather 8575 Applications

• Organizing small tools and fasteners on suspenders or vest
• Quick access to safety glasses and pencils on the jobsite
• Expanding storage capacity of Stronghold suspenders
• Keeping essential items secured while moving or climbing

Occidental Leather 8575 Installation Overview

1. Clip the spring steel attachment onto the chest strap of Stronghold suspenders.
2. Position on the right side for preferred access.
3. Load pockets with tools and fasteners as needed.
4. Secure items using the velcro flap and pouch closure.
5. Confirm the clip is fully seated and pouch is stable before use.