Occidental Leather
Occidental Leather 8576 Clip-On Stronghold Insta-Vest Gear Pockets (left side)
Occidental Leather 8576 Description
The Stronghold® Clip-On Insta-Vest™ Gear Pockets are designed for the left side and attach securely to the chest strap of Stronghold suspenders. With 11 pockets & tool holders, a durable spring steel clip, and a padded smartphone sleeve with Velcro® flap, this compact accessory keeps frequently used tools within easy reach. Made in the USA.
Occidental Leather 8576 Includes
- (1) 8576 Clip-On Stronghold Insta-Vest Gear Pockets (Left Side)
- (1) Oxy Tool Shield™
Occidental Leather 8576 Key Features
- Left-side clip-on gear pocket module for Stronghold suspenders
- Durable spring steel clip for fast on/off attachment
- 11 total pockets & tool holders for organized storage
- Padded smartphone sleeve with secure Velcro® flap
- Lightweight design — just 0.82 lbs
- Includes Oxy Tool Shield™ for sharp tool protection
- Made in the USA
Occidental Leather 8576 Applications
- Clip to Stronghold suspender chest strap to carry essentials
- Keep phone, markers, knife, and small tools at the ready
- Add left-side storage to Insta-Vest™ and suspender systems
- Ideal for trades needing quick-access organization on the chest
Occidental Leather 8576 Installation Overview
- Open the spring steel clip on the rear of the pocket set.
- Attach the clip to the chest strap of Stronghold suspenders.
- Position on the left side for preferred reach.
- Load tools into pockets and place sharp tools in the Oxy Tool Shield™.
- Secure your smartphone inside the padded sleeve and close the Velcro® flap.
Occidental Leather 8576 Specifications
| Weight | 0.82 lbs |
| Overall Dimensions | 18" x 8" x 3" (O.A.) |
| Pouch Size | 5.5" x 5.5" Deep |
| Side | Left |
| Pockets/Tool Holders | 11 |
| Compatibility | Clips to Stronghold® suspender chest strap |
| Origin | Made in USA |
Occidental Leather 8576 Clip-On Stronghold Insta-Vest Gear Pockets (left side)
Left clip-on Insta-Vest pockets with 11 holders
✓ Left-side layout for Stronghold suspenders
✓ Spring steel clip for secure attachment
✓ Padded phone sleeve with Velcro® flap
✓ 11 pockets/tool holders for organization
✓ Made in USA
2 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Cleaning
- After use, brush off dust and debris.
- Spot clean the fabric body with mild soap and lukewarm water using a soft cloth or sponge; wipe to remove residue.
- Do not machine wash, tumble dry, or bleach. Air dry completely, away from direct heat.
Leather Trim
- Wipe leather parts with a slightly damp cloth; for heavier soil, use a small amount of leather cleaner.
- Condition occasionally with a leather conditioner to keep leather supple. Avoid soaking leather or using harsh solvents.
- Keep prolonged moisture and direct sun exposure to a minimum to prevent drying or color transfer.
Spring-Steel Clip
- Keep the clip clean and dry to help prevent corrosion.
- If exposed to moisture, dry thoroughly; a light application of oil can be used on the clip surface as needed.
- Do not bend or pry the clip; attach to the chest strap as designed.
Hook-and-Loop (Velcro) Flap
- Keep the hook-and-loop fastener free of lint by brushing it out periodically; close the flap when not in use.
Use and Storage
- Do not overfill the pockets; distribute tools to avoid overstressing stitching and rivets.
- Store in a cool, dry place when not in use.
- Inspect routinely for wear to stitching, rivets, and the clip.
- Left-side layout for quick access on Stronghold® suspenders
- Spring steel clip attaches securely to chest strap
- 11 pockets & holders keep essentials organized
- Padded phone sleeve with Velcro® flap
- Includes Oxy Tool Shield™ for sharp tool protection
- Weight: 0.82 lbs
- Overall Dimensions: 18" x 8" x 3" (O.A.)
- Pouch Size: 5.5" x 5.5" Deep
- Side: Left
- Made in USA
More About Occidental Leather 8576 Clip-On Stronghold Insta-Vest Gear Pockets (left side)
Occidental Leather 8576 Description
The Stronghold® Clip-On Insta-Vest™ Gear Pockets are designed for the left side and attach securely to the chest strap of Stronghold suspenders. With 11 pockets & tool holders, a durable spring steel clip, and a padded smartphone sleeve with Velcro® flap, this compact accessory keeps frequently used tools within easy reach. Made in the USA.
Occidental Leather 8576 Includes
- (1) 8576 Clip-On Stronghold Insta-Vest Gear Pockets (Left Side)
- (1) Oxy Tool Shield™
Occidental Leather 8576 Key Features
- Left-side clip-on gear pocket module for Stronghold suspenders
- Durable spring steel clip for fast on/off attachment
- 11 total pockets & tool holders for organized storage
- Padded smartphone sleeve with secure Velcro® flap
- Lightweight design — just 0.82 lbs
- Includes Oxy Tool Shield™ for sharp tool protection
- Made in the USA
Occidental Leather 8576 Applications
- Clip to Stronghold suspender chest strap to carry essentials
- Keep phone, markers, knife, and small tools at the ready
- Add left-side storage to Insta-Vest™ and suspender systems
- Ideal for trades needing quick-access organization on the chest
Occidental Leather 8576 Installation Overview
- Open the spring steel clip on the rear of the pocket set.
- Attach the clip to the chest strap of Stronghold suspenders.
- Position on the left side for preferred reach.
- Load tools into pockets and place sharp tools in the Oxy Tool Shield™.
- Secure your smartphone inside the padded sleeve and close the Velcro® flap.
Occidental Leather 8576 Specifications
| Weight | 0.82 lbs |
| Overall Dimensions | 18" x 8" x 3" (O.A.) |
| Pouch Size | 5.5" x 5.5" Deep |
| Side | Left |
| Pockets/Tool Holders | 11 |
| Compatibility | Clips to Stronghold® suspender chest strap |
| Origin | Made in USA |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
