Occidental Leather Accessories

Occidental Leather 5028 Features

• Full-grain leather construction holds shape and resists wear
• Designed for snips; fits many small hand tools
• No-swing hammer alternative for rigid carry
• Secure belt fit on belts up to 3 inches wide
• Compatible with WISS snips (M1, M2, M3; WS series)
• Handcrafted in the USA

Occidental Leather 5028 Applications

• Carry aviation snips for steel framing tasks
• Organize small hand tools on a tool belt
• Use as a rigid, low-swing hammer holder
• General jobsite tool access on belts up to 3 inches

Occidental Leather 5028 Installation Overview

1. Slide the holster onto a belt up to 3 inches wide.
2. Position at preferred carry location.
3. Insert snips or tool fully into the pocket.
4. Verify secure fit before use.

Occidental Leather 9502 Key Features

• Dual pouch design for expanded fastener storage
• Leather clip-on patch for phone, notebook, or small tool
• Clips to belts up to 2 in or to toolboxes
• Stores preloaded for fast swap between tasks
• Made in USA

Occidental Leather 9502 Applications

• Carry and organize screws, nails, and small hardware
• Add-on storage for tool belts and rigs
• Subdivide main bags for better organization
• Trim and finish tasks needing compact fastener access
• Jobsite or shop use with toolbox clip-on convenience

Occidental Leather 9502 Installation Overview

1. Load pouches with fasteners or small tools as needed.
2. Attach the clip to a work belt up to 2 in wide or to a toolbox edge.
3. Position for comfortable reach and confirm secure attachment.
4. Reposition or remove quickly as tasks change.

Occidental Leather 9503 Key Features

• Angle square holster for quick access
• Single clip-on, large capacity main bag
• Attaches to belts or waistbands for grab-and-go use
• Industrial nylon construction
• Made in USA

Occidental Leather 9503 Applications

• Carry nails, screws, and small hand tools
• Light-duty service calls and punch-list tasks
• DIY and weekend project setups
• Quick add-on storage to existing work belts

Occidental Leather 9503 Installation Overview

1. Clip the pouch onto a belt or waistband.
2. Seat the angle square in the holster slot.
3. Load fasteners or small tools into the main bag.
4. Verify secure attachment before use.

Key Features

• Chemically neutral, salt-free formula safe for full-grain leather
• Penetrates leather fibers to inhibit oxidation and extend life
• Waterproofs, restores, and protects leather gear
• Natural ingredients: triple filtered beeswax, seed oils, and lipids
• Made in the USA

Applications

• Conditioning and maintaining Occidental Leather tool belts, bags, and pouches
• Waterproofing and protecting most other full-grain leather goods
• Reducing cracking, drying, and stitching damage from harsh use
• Not for use on suede or nubuck

Installation Overview

1. Clean leather; wipe off dirt and debris.
2. Apply a small amount with a clean cloth in circular motions until coated.
3. Allow cream to absorb; buff off any excess.
4. Repeat as needed for heavily worn areas.
5. Test on a small area first; do not use on suede or nubuck.

Occidental Leather 5032 Key Features

• All-leather, USA-made construction for durability
• Versatile fit for bull pins or nail bars
• Tapered pocket helps retain tools and reduce swing
• Slides onto belts up to 3 in wide
• Riveted and stitched for added strength
• Compact design for comfortable all-day wear
• Available in OxyRed and OxyBlack

Occidental Leather 5032 Applications

• Carry and secure an ironworker bull pin
• Belt holster for nail bars and similar prying tools
• Hands-free access during steel erection and layout
• Organize tools on construction and trade job sites
• Minimize tool swing while climbing or moving

Occidental Leather 5032 Installation Overview

1. Thread the holster onto a work belt up to 3 in wide.
2. Position on preferred side for quick access.
3. Insert bull pin or nail bar into the tapered pocket.
4. Ensure the tool is seated fully and retained securely.
5. Recheck fit after first use and adjust belt position if needed.

Occidental Leather 5010 Features

• 1 inch wide leather loop supports a safety release snap
• Ideal for saw keys, small wrenches, and similar items
• Keeps frequently used tools within easy reach
• Durable leather construction
• Made in USA

Occidental Leather 5010 Applications

• Hang keys, small wrenches, and accessories from a belt or bag
• Add quick access clip point to tool belts or pouches
• Organize frequently used small tools on the jobsite

Occidental Leather 5010 Installation Overview

1. Slide the leather loop onto your belt, strap, or D ring.
2. Secure the loop so the snap hangs freely.
3. Clip keys or small tools to the safety release snap.
4. Verify the snap opens and closes smoothly before use.

Occidental Leather 9005 Features

• Provides extra lower back support on tool belts
• Slides under a third bag or hammer holder
• High density foam pad with polyethylene stiffener
• Durable industrial nylon cover
• Made in USA

Occidental Leather 9005 Applications

• Add support and comfort to existing work belts
• Use beneath a third bag or hammer loop without interference
• Stabilize belt load during heavy tool carry
• Retrofit for most professional tool belt systems

Occidental Leather 9005 Installation Overview

1. Slide the Belt Buddy onto your work belt at the rear center.
2. Position so it sits comfortably at the lower back.
3. Attach a third bag or hammer holder over the pad if desired.
4. Tighten belt and adjust for support and fit.

Occidental Leather 5518 Features

• Long sleeve style keeps tools upright and close to the body
• Reduces tool swing to avoid knee capping
• Heavy duty full leather construction
• Fits belts up to 3 in wide
• Made in the USA

Occidental Leather 5518 Applications

• Carry and secure framing or finish hammers
• Holster for hammer tackers on the jobsite
• Flat bar storage up to 1-5/8 in diameter
• Reduce tool sway while climbing or walking
• Add a hammer sleeve to any 3 in belt

Occidental Leather 5518 Installation Overview

1. Slide the holder onto a work belt up to 3 in wide.
2. Position the sleeve where the tool is easy to reach.
3. Insert the hammer, tacker, or flat bar handle into the sleeve.
4. Confirm the tool sits securely and does not swing.
5. Tighten belt as needed for stable carry.

Occidental Leather 6568 Key Features

• All leather construction for durability
• Secure snap closure
• Clip on design for belt or pocket carry
• Fits Construction Master models I, II, III, IV and other brands
• Also available as belt worn model 5068
• Made in USA

Occidental Leather 6568 Applications

• Protecting calculators on the jobsite
• Hands free carry clipped to belt or pocket
• Field measurements and quick calculations
• Organized storage in tool belts and bags

Occidental Leather 6568 Installation Overview

1. Insert calculator into the case.
2. Close the snap to secure.
3. Attach the clip to belt or pocket edge.
4. Check that the case is seated firmly before use.

Occidental Leather 8505 Features

• Clip-on mount attaches to belt or pocket for quick access
• 4 tool pockets sized for knife, pencils, and 35 ft tape
• FatMax compatible tape pocket
• Ultra-lightweight at 0.2 lbs for all-day comfort
• Durable nylon with leather reinforcement; made in USA

Occidental Leather 8505 Applications

• Carry and organize measuring tape, utility knife, and pencils
• Quick tool access on belt or pocket during layout and marking
• Jobsite or shop use where compact organization is needed

Occidental Leather 8505 Installation Overview

1. Clip the holder onto your belt or pocket.
2. Place tape measure, knife, and pencils into designated pockets.
3. Confirm the clip is secure and pockets are seated.
4. Adjust tool placement for comfortable reach.

Occidental Leather 5031 Key Features

• Belt-worn utility attachment for spring-snap tools
• Fits up to a 3 inch work belt
• 3/4 inch dee ring for secure clipping
• Leather strap construction for durability
• Snap closure secures around belt
• Made in USA

Occidental Leather 5031 Applications

• Carry telephone butt-sets and testers from a belt
• Attach meters, small tools, or lanyards via spring snaps
• Add a quick-access ring point to tool belts
• Organize clip-on accessories for electricians and technicians
• Temporary attachment point for keys or ID holders on the job

Occidental Leather 5031 Installation Overview

1. Open the strap and place it around your work belt.
2. Position the dee ring where you want access.
3. Snap the closure to secure the strap to the belt.
4. Attach the spring snap from your tool or lanyard to the dee ring.
5. Confirm the snap and ring are fully engaged before use.

Occidental Leather 5013 Key Features

• Holds most pliers and side cutters
• Ideal for Felco and other pruning shears
• Durable leather construction with closed bottom
• Fits belts up to 3 in. wide
• Made in USA

Occidental Leather 5013 Applications

• Carry pruning shears for landscaping and gardening
• Keep pliers or side cutters accessible on the jobsite
• Organize everyday tools on a work belt

Occidental Leather 5013 Installation Overview

1. Slide the holster onto a belt up to 3 in. wide.
2. Seat the tool fully into the pocket.
3. Confirm the holster sits securely and does not obstruct movement.

Occidental Leather 5025 Features

• Fits pliers, side cutters, crimpers, and plumb bobs
• Open-bottom design for longer tools and debris release
• Full-grain leather construction for durability
• Compact profile with minimal bulk on belt
• Made in the USA

Occidental Leather 5025 Applications

• Keep pliers and cutters accessible on the job
• Hold plumb bobs for surveying and layout work
• Organize essential hand tools on a work belt
• Daily use for electricians, framers, and general trades

Occidental Leather 5025 Installation Overview

1. Thread holster onto your work belt and position as desired.
2. Insert tool fully into the holster.
3. Confirm secure fit and comfortable access before use.

Occidental Leather 8578 Features

• Clip-on mount with spring steel attachment for suspenders
• Padded phone sleeve with velcro flap
• Holders for pencils, notepad, and driver bits
• Seven total pockets and holders
• Easy to install and remove as needed
• Made in USA

Occidental Leather 8578 Applications

• Chest-mounted carry for daily jobsite essentials
• Secure phone storage while climbing or moving
• Quick access to pencils, notepad, and driver bits
• Organization add-on for Stronghold suspenders

Occidental Leather 8578 Installation Overview

1. Position the pocket on the chest strap of Stronghold suspenders.
2. Clip the spring steel attachment over the strap until secure.
3. Place phone in padded sleeve and close velcro flap.
4. Load pencils, notepad, and bits into the designated holders.
5. Check fit and accessibility before use.

Occidental Leather 8574 Key Features

• Clip-on leather holster for phones
• Velcro closure to fit many phone sizes
• Heavy duty elastic sides expand up to 1-1/2 in
• 2 in spring steel belt clip for secure attachment
• Made in USA

Occidental Leather 8574 Applications

• Everyday belt carry for standard size smartphones
• Jobsite phone protection with secure closure
• Hands-free access while working or commuting
• Clips to belts or waistbands up to 2 in wide

Occidental Leather 8574 Installation Overview

1. Slide the spring steel clip over your belt or waistband.
2. Place your phone inside the pocket.
3. Close the flap and press the Velcro to secure.
4. Confirm the elastic sides hold the phone snugly.
5. Check access and adjust position as needed.

Occidental Leather 5527 Features

• Holds offset metal snips like Wiss M6 and M7; also fits pruning shears
• Full grain American leather construction
• Accepts belts up to 3 in. wide for stable carry
• Designed with steel framers in mind; great for pros and DIYers
• Made in the USA

Occidental Leather 5527 Applications

• Steel framing and sheet metal work
• General contracting and remodeling
• Landscaping and pruning tasks
• Tool belt organization for offset snips

Occidental Leather 5527 Installation Overview

1. Slide holster onto a belt up to 3 in. wide.
2. Optional: pair with the 2003 Oxy Tool Shield.
3. Insert offset snips or pruning shears fully into the pocket.
4. Confirm a secure fit before use.

Occidental Leather 9511 Key Features

• Cost efficient fastener management
• Modular clip-on design for easy swap between tasks
• Slightly deeper and narrower than the 9501
• Clips to belts up to 2 in wide; also clips to toolboxes or truck interiors
• Made in USA

Occidental Leather 9511 Applications

• Carrying nails, screws, and small fasteners
• Modular add-on storage for tool belts
• Quick-change setups for varied tasks
• Clipping to a truck or toolbox for organized access

Occidental Leather 9511 Installation Overview

1. Verify your belt is no wider than 2 in.
2. Slide the clip over the belt edge until fully seated.
3. Load fasteners into the pouch.
4. Adjust position on belt for comfort and reach.
5. Remove and reclip as needed for different applications.

Occidental Leather 5008SM Key Features

• Bridle leather, custom tanned in the USA
• Edge stitched for strength and clean look
• Heavy duty steel roller buckle with nickel finish
• 1.5 in. width for everyday wear
• Made in the USA

Occidental Leather 5008SM Applications

• Everyday pant support for workwear
• Jobsite use where a durable leather belt is preferred
• Holds small clip-on accessories compatible with pant belts

Occidental Leather 5008SM Installation Overview

1. Measure current belt from buckle end to most-used hole.
2. Select the size closest to that mid-range measurement.
3. If no belt to measure, add 4 in. to pant waist for an estimate.
4. Thread belt through pant loops and fasten with buckle.

Occidental Leather 1019 Key Features

• Bridle leather construction for durability and classic look
• Adjustable shoulder pad for added comfort
• High quality swivel steel clips for easy on and off
• 1" wide strap adjusts 45" to 57.5" to fit most users
• Made in USA

Occidental Leather 1019 Applications

• Add a shoulder carry option to Journeyman's Tote and IronMouth bags
• Upgrade or replace straps on tool bags and carry totes
• Comfortable carry for travel and everyday gear

Occidental Leather 1019 Installation Overview

1. Attach each swivel clip to the bag's D-rings or hardware loops.
2. Position the shoulder pad at the desired resting point.
3. Adjust strap length between 45" and 57.5" for fit.
4. Check clips for secure closure before use.

Occidental Leather 5058M Features

• 100 percent cotton for everyday comfort
• Natural color with bold Oxy red logo centered on chest
• Anniversary logo on the right sleeve
• Crew neck short sleeve design
• Medium size fit

Occidental Leather 5058M Applications

• Casual wear on and off the jobsite
• Brand pride and promotional events
• Comfortable everyday workwear layer

Occidental Leather 8564 Key Features

• 9 pockets and tool holders for fasteners and small tools
• Patented 2-in-1 outer bag with angle square holster; 3 bags total
• Durable nylon body with OxyRed leather-reinforced corners
• Clip-on design fits the 2535 Builders Vest
• Made in USA

Occidental Leather 8564 Applications

• Organizing nails, screws, and driver bits
• Carrying angle and tri-squares
• Stowing a cats paw or similar pry tool
• Left-side fastener access on Builders Vest systems

Occidental Leather 8564 Installation Overview

1. Align the clip-on tabs with the attachment points on the 2535 Builders Vest.
2. Securely clip the pouch to the vest until it locks in place.
3. Verify the pouch is seated and does not shift.
4. Load tools and fasteners; place frequently used items for left-hand access.

Occidental Leather 8071 Key Features

• Back strap ONLY for the 5592 Beltless Retro Kit
• Heavy duty construction for long service life
• Made in USA
• Simple, tool free attachment to Beltless system

Occidental Leather 8071 Applications

• Replace worn or damaged back strap on Beltless Retro Kit
• Maintain proper support and balance of Beltless system
• Improve bag movement and accessibility on Beltless setup

Occidental Leather 8071 Installation Overview

1. Detach the existing back strap from the Beltless Retro Kit loops.
2. Feed the new strap through the attachment points on both bags.
3. Secure ends and center buckle, ensuring even alignment.
4. Adjust strap tension for desired bag swing and comfort.
5. Confirm all connections are tight before use.

Occidental Leather B5114K Features

• Low-profile carry keeps tool snug and secure
• DIY installation with copper rivets and guidance
• Premium, handcrafted leather construction
• Made in USA

Occidental Leather B5114K Applications

• Framing work requiring fast cat's paw access
• Roofing tasks where low-swing storage is preferred
• General carpentry and trim installation
• Outfitting tool belts, vests, and rigs with a dedicated sleeve

Occidental Leather B5114K Installation Overview

1. Gather tools: smooth face hammer, cutters, 9/32 socket, pick, drill with 3/16 bit, and hard surface.
2. Drill out two outer rivets from the non-dominant side bag.
3. Insert the new rivet through the hanger and through the sleeve hole.
4. Seat washer using a hammer and socket or small pipe.
5. Trim rivet to leave about 1/8 to 3/16 length.
6. Peen rivet on a hard surface with a smooth face hammer to finish.

Occidental Leather 5114K Key Features

• Low profile sleeve keeps tool snug to the body
• DIY install kit with copper rivets and instructions
• Premium leather construction, handcrafted
• Made in the USA

Occidental Leather 5114K Applications

• Framing and structural carpentry carry
• Roofing tasks requiring secure pry bar access
• Finish carpentry and trim work
• Mounting to tool pouches, vests, or belt rigs

Occidental Leather 5114K Installation Overview

1. Gather tools: smooth face hammer, side cutters, 9/32 deep socket, pick, drill with 3/16 bit, and a hard surface.
2. Drill out and remove the two outer rivets on the nondominant side bag.
3. Position sleeve; push a new rivet through the hanger and sleeve holes.
4. Seat washer using a hammer and socket or small pipe.
5. Trim excess rivet length to about 1/8 - 3/16 in.
6. Peen the rivet on a hard surface until tight; repeat for remaining rivet.