Sort by:
Occidental Leather 5059 High Mount Hammer Holder Description
Made from premium full-grain belting leather, this compact high-mount hammer holder keeps your tool close and controlled for all-day comfort.
Includes
- (1) Occidental Leather 5059 High Mount Hammer Holder
Key Features
- High-mount profile reduces swing and keeps hammer close to the body
- 10 oz full-grain belting leather for durability
- Heavy-duty 2.5 inch steel loop fits most standard hammers
- Fits belts up to 3 inches wide
- Compact, comfortable carry — ideal for overhead work and climbing
- Handmade in the USA
Applications
- Framing and general carpentry
- Roofing and overhead tasks
- Ladder, lift, and on-the-move work
- Tight-space and close-quarter jobsites
Installation Overview
- Slide the holder onto a work belt up to 3 inches wide.
- Position at your preferred carry location for comfort and reach.
- Insert hammer head-first into the steel loop.
- Walk and bend to confirm minimal swing; adjust position as needed.
Specifications
| Material | 10 oz full-grain belting leather; steel loop |
| Loop Size | 2.5 in steel loop |
| Belt Compatibility | Up to 3 in wide belts |
| Dimensions | Approx. 4 in H x 4.5 in W (not including loop) |
| Weight | Approx. 161 g |
| Country of Origin | USA |
| Colors | OxyRed, OxyBlack |
| Model / SKU | 5059 |
Occidental Leather 2003 Oxy Tool Shield Description
The Oxy Tool Shield from Occidental Leather provides compact, clip-on protection for sharp tools and your gear. Designed to fit most Occidental tool bags or a pants pocket, it safely holds chisels, knives, diagonal cutters, and includes a slot for one round pencil.
Occidental Leather 2003 Includes
- (1) Oxy Tool Shield (Occidental Leather 2003)
Occidental Leather 2003 Key Features
- Clip-on convenience for bags or pockets
- Protects tools, bags, and body from sharp edges
- Holds a chisel, knife, or diagonal cutter plus one pencil
- Compact, lightweight, jobsite-ready build
- Fits most Occidental Leather bags and many other tool bags
Occidental Leather 2003 Applications
- Safe storage of sharp hand tools on tool belts or bags
- Protecting clothing and pouches from blade damage
- Keeping chisels and cutters accessible while preventing injury
- Organizing a pencil alongside a primary cutting tool
Occidental Leather 2003 Installation Overview
- Attach the shield by clipping it onto a tool bag edge or pocket.
- Insert the chosen tool into the main compartment until fully seated.
- Place one round pencil into the integrated slot if desired.
- Confirm the clip is secure and the tool is retained before use.
Occidental Leather 2003 Specifications
| Pockets & Slots | 2 (1 tool + 1 pencil) |
| Dimensions | 6" H x 2.6" W x 1.6" D |
| Weight | 2 oz |
| GTIN | 759244205206 |
| Color | Black |
| Compatibility | Clips to most tool bags or pockets |
Occidental Leather 5012 Hammer Holder Description
Our best-selling hammer holder built for long-term use. Hardware is captured between two layers of premium 12-oz leather and secured with plated steel rivets. A stitched leather back protects from rivet heads and minimizes handle slapping. Suitable for hammers, pipe wrenches, sheet metal shears, and similar tools.
Includes
- (1) Occidental Leather 5012 Hammer Holder
Key Features
- Dual-layer 12-oz leather construction for durability and comfort
- Heavy-duty 2.5 inch steel loop accommodates most hammers
- Fits belts up to 3 inches wide with dual slots
- Stitched back reduces handle movement and protects from rivet heads
- Made in the USA
Applications
- Framing: Secure, accessible hammer storage onsite
- Roofing: Keeps tools stable while working at height
- General construction: Universal holder for common hammer types
- Shop work: Compatible with belts up to 3 inches
Installation Overview
- Slide the holder onto a work belt using the two slots (fits up to 3 inches).
- Position the steel loop where access is most convenient.
- Ensure the holder sits flat and does not interfere with other pouches.
- Place the hammer in the loop and confirm stable carry.
Specifications
| Model | 5012 |
| Material | 12 oz full-grain leather; steel hardware |
| Loop Size | 2.5 inch steel loop |
| Belt Compatibility | Fits belts up to 3 inches wide |
| Weight | Approx. 0.5 lb (240 g) |
| Color Options | OxyRed or OxyBlack |
| Country of Origin | USA |
| UPC | 759244005905 |
Occidental Leather 5520 Description
The Occidental Leather 5520 5-in-1 Tool Holder maximizes belt space by organizing essentials in a compact leather holster. Carry a hammer, pliers, pencil, lumber crayon or screwdriver, plus a sharp tool using the included Oxy Tool Shield. Built from rugged American leather and fits belts up to 3" wide.
Occidental Leather 5520 Includes
- (1) Occidental Leather 5520 5-in-1 Tool Holder
- (1) 2003 Oxy Tool Shield
- (1) Tool Bag
Occidental Leather 5520 Key Features
- 5-in-1 capacity — holders for hammer, pliers, pencil, lumber crayon/screwdriver, and sharp tools
- Includes removable Oxy Tool Shield for chisels, knives, or similar
- Premium full-grain American leather construction
- Compact footprint saves belt space; fits belts up to 3" wide
- Made in the USA
Occidental Leather 5520 Applications
- Framing: Keep core hand tools at the ready
- Electrical work: Organize pliers, drivers, and markers
- Carpentry: Carry chisels, hammers, and layout tools
- Punch-list/finish tasks: Streamlined, compact tool access
Occidental Leather 5520 Installation Overview
- Slide the holder onto a work belt up to 3" wide.
- Insert the removable Oxy Tool Shield into its pocket if using sharp tools.
- Load tools into the designated holders (hammer, pliers, pencil, crayon/screwdriver).
- Check retention and accessibility; adjust tool placement as needed.
Occidental Leather 5520 Specifications
| Material | Full-grain American leather |
| Dimensions | 3.5" x 7.75" |
| Belt Fit | Up to 3" wide |
| Includes | 2003 Oxy Tool Shield |
| Country of Manufacture | USA |
Occidental Leather 5037 High Mount Tape Holder Description
Premium leather, belt-worn tape measure holster that rides high for easy reach and mobility. The 5037 size fits most 30’ tapes (including FatMax without clip) and is made in the USA. Compatible with belts up to 3 in. wide.
Includes
- (1) Occidental Leather 5037 High Mount Tape Holder
Key Features
- High-mount design keeps tape accessible and out of the way
- Fits belts up to 3 in. wide
- Premium, durable leather construction
- Made in the USA
- Size 5037 (Large) fits most 30’ tapes; accommodates FatMax without clip
Applications
- Securely carry a tape measure on a tool belt
- Framing, trim, and general carpentry tasks
- Jobsite measuring where quick access is essential
Installation Overview
- Thread the holster onto a belt up to 3 in. wide.
- Select the correct size; 5037 is for most 30’ tapes.
- Insert the tape measure; remove the clip if using FatMax for best fit.
- Position holster on belt for preferred high-mount access.
Specifications
| Material | Premium leather |
| Belt Compatibility | Up to 3 in. wide |
| Size | 5037 Large |
| Fit | Most 30’ tapes; fits FatMax without clip |
| Weight | Approx. 0.3 lb (159 g) |
| Made In | USA |
| Color Options | OxyRed, OxyBlack |
Occidental Leather 5522 Description
Maximize belt space with the Occidental Leather 5522 Belt-Worn 4-in-1 Tool/Tape Holder. Built from sturdy American full-grain leather, it organizes a tape measure, pencil, lumber crayon or screwdriver, and includes a FREE 2003 Oxy Tool Shield to safely carry sharp tools. Fits belts up to 3" wide and is ideal for pros and DIYers.
Includes
- (1) Occidental Leather 5522 4-in-1 Tool/Tape Holder
- (1) Oxy Tool Shield (Model 2003)
Key Features
- 4-in-1 functionality — holds tape, pencil, lumber crayon or screwdriver, plus sharp tools
- Includes Oxy Tool Shield for safe storage of chisels, knives, and cutters
- Premium full-grain leather for durability and long service life
- Belt-ready tunnel loop fits belts up to 3" wide
- Compact design provides 4x capacity in the space of one holder
- Made in USA
Applications
- Carry and organize tape measure, marking tools, and a utility knife on the belt
- Framing, finish work, and general carpentry where quick tool access is needed
- DIY and weekend projects requiring compact tool storage
Installation Overview
- Verify belt width (up to 3").
- Thread the belt through the holder’s tunnel loop.
- Position the holder at your preferred location on the belt.
- Load tape, pencil, crayon/screwdriver, and place sharp tools in the Oxy Tool Shield.
- Check that tools are seated securely before use.
Specifications
| Material | Full-grain leather |
| Belt Fit | Up to 3" wide |
| Included | Oxy Tool Shield (Model 2003) |
| Weight | 0.7 lb (approx. 308 g) |
| Colors | OxyRed (5522), OxyBlack (B5522) |
| Made In | USA |
| Category | Tool Holster / Belt-worn holder |
Occidental Leather 5020 Description
The Occidental Leather 5020 2-in-1 Tool & Hammer Holder combines a hammer loop and a compact tool pocket to double your carry capacity while taking up minimal belt space. Built from durable 12 oz English bridle leather with riveted and stitched reinforcement, it slides onto standard tool belts for fast access on framing, finish, or DIY jobs. Made in the USA. Dimensions: 3.5 in W x 6.5 in H; Weight: 0.4 lb.
Occidental Leather 5020 Includes
- (1) 2-in-1 Tool & Hammer Holder (Model 5020)
Occidental Leather 5020 Features
- Dual-function design: integrated hammer loop plus pocket for a hand tool
- Space-saving footprint to free up room on your belt
- 12 oz English bridle leather for long-term durability
- Slides onto standard tool belts for quick setup
- Heavy-duty stitching and metal rivets for jobsite toughness
- Made in the USA
Occidental Leather 5020 Applications
- Carry a hammer and primary hand tool together on one holder
- Framing, trim, and general carpentry tool belts
- Remodeling and punch-list work where compact carry is key
- Workshop use and weekend DIY tasks
- Jobsite setups needing fast access without adding bulk
Occidental Leather 5020 Installation Overview
- Thread the holder onto your tool belt at the preferred position.
- Orient the pocket and loop for dominant-hand access.
- Seat the hammer in the front loop and place a hand tool in the pocket.
- Check that tools hang freely with no interference while walking or kneeling.
- Reposition on the belt if needed for balance and comfort.
Occidental Leather 5020 Specifications
| Model | 5020 |
| Type | 2-in-1 Tool & Hammer Holder |
| Material | 12 oz English bridle leather |
| Carry Style | Slides onto standard tool belts |
| Dimensions | 3.5 in W x 6.5 in H |
| Weight | 0.4 lb |
| Country of Origin | USA |
NOTE: —
Occidental Leather 5005L Description
Designed to eliminate cutting edges and circulation issues common with safety and tool belts, this belt liner features .75"+ thick sheepskin padding for maximum comfort. Sheepskin provides natural insulation—warm in winter, cool in summer—and wool wicks moisture to dry quickly. Adjustable straps secure belts up to 3" wide and require 1–2" of additional belt length.
Occidental Leather 5005L Includes
- (1) Belt Liner with Sheepskin (5005L)
Occidental Leather 5005L Key Features
- .75"+ thick sheepskin pads for cushioned support
- Moisture-wicking wool keeps you dry and comfortable
- Natural insulation—comfortable year-round
- Adjustable straps fit belts up to 3" wide
- Requires 1–2" extra belt length for proper fit
- Made in USA
Occidental Leather 5005L Applications
- Increase comfort when wearing loaded tool belt rigs
- Reduce pressure points during long shifts
- Improve fit for framing, finish, electrical, and roofing setups
- Add insulation and moisture control to any compatible work belt
Occidental Leather 5005L Installation Overview
- Lay your existing tool belt flat and measure per size chart to confirm fit.
- Position the liner inside the belt with sheepskin toward the body.
- Thread and fasten the liner’s adjustable straps around the belt (up to 3" wide).
- Allow 1–2" extra belt length; secure buckle and check comfort.
- Attach pouches/holders and verify clearance before use.
Occidental Leather 5005L Specifications
| Material | Sheepskin padding with leather outer |
| Padding Thickness | .75"+ |
| Fits Belt Width | Up to 3" |
| Extra Belt Length Needed | 1–2" |
| Sizes | Small, Medium, Large, X-Large |
| Weight | Approx. 1.6 lb |
| Country of Manufacture | USA |
Occidental Leather 5523 Description
Compact and efficient, the clip-on 4-in-1 holder delivers maximum utility in minimal space. It provides dedicated storage for a tape measure, pencil, lumber crayon or screwdriver, and includes an Oxy Tool Shield for safely carrying sharp tools. Built from sturdy American leather with an extra heavy-duty steel clip that fits belts up to 2" wide.
Occidental Leather 5523 Includes
- (1) Clip-On 4-in-1 Tool & Tape Holder
- (1) Oxy Tool Shield
Occidental Leather 5523 Key Features
- 4-in-1 capacity for tape, pencil, crayon/screwdriver, and sharp tools
- Includes Oxy Tool Shield for chisels, knives, or cutters
- Extra heavy-duty steel clip fits belts up to 2" wide
- Sturdy American leather construction for long-term durability
- Clip-on design for quick attachment and removal
- Made in the USA
Occidental Leather 5523 Applications
- Carry and access a tape measure on the job
- Keep pencils and lumber crayons within easy reach
- Holster a screwdriver or similar hand tool
- Safely store sharp tools using the included shield
- Clip to work belts for carpentry, framing, or finish work
Occidental Leather 5523 Installation Overview
- Attach the steel clip to a belt up to 2" wide.
- Insert tape measure into the main pocket.
- Place pencil and crayon/screwdriver in side holders.
- Mount sharp tools in the Oxy Tool Shield.
- Confirm secure fit before use.
Occidental Leather 5523 Specifications
| SKU | 5523 |
| Material | American leather |
| Clip Material | Steel |
| Belt Fit | Up to 2" wide |
| Capacity | 4-in-1 (tape, pencil, crayon/screwdriver, sharp tool) |
| Weight | 0.7 lb |
| Origin | Made in USA |
Occidental Leather 5058LG Description
A classic 100% cotton tee in natural color featuring the iconic Oxy red vintage logo. Comfortable everyday fit for the jobsite or casual wear. Made in the USA.
Occidental Leather 5058LG Includes
- (1) T-Shirt
Occidental Leather 5058LG Features
- 100% cotton fabric for breathable comfort
- Natural color with classic Oxy red vintage logo
- Everyday fit suitable for work or casual wear
- Sizes available: Small to XXX-Large
- Made in the USA
Occidental Leather 5058LG Specifications
| Material | 100% Cotton |
| Color | Natural |
| Fit | Everyday/relaxed |
| Country of Manufacture | USA |
| Available Sizes | S, M, L, XL, XXL, XXXL |
| Variant | Large (SKU: 5058LG) |
Occidental Leather 5046 Description
Durable clip-on tape holster built from heirloom-quality leather with an extra-long, wide steel clip for a secure, high-mount hold on your belt. Designed for demanding field use and quick access, made in the USA.
Occidental Leather 5046 Includes
- (1) Clip-On Tape Holster
Occidental Leather 5046 Key Features
- Clip-on design installs without removing your belt
- Proprietary extra-long, wide steel clip resists accidental release
- High-mount position reduces swing and improves mobility
- Heirloom-quality leather withstands tough jobsite conditions
- Made in the USA
Occidental Leather 5046 Applications
- Securely carry a tape measure on tool belts up to 2″ wide
- Framing and carpentry measuring tasks
- General construction and remodeling
- Jobsite mobility with quick tape access
Occidental Leather 5046 Installation Overview
- Position the clip over your belt (fits up to 2″ wide).
- Slide the holster down until the clip locks onto the belt.
- Insert the tape measure into the leather holster.
- Confirm secure engagement and comfortable placement.
Occidental Leather 5046 Specifications
| Model | 5046 |
| Material | Heirloom-quality leather |
| Clip | Proprietary extra-long, wide steel belt clip |
| Belt Compatibility | Up to 2″ wide belts |
| Capacity | Holds up to a 35′ Fat Max |
| Made In | USA |
| Weight | Approx. 0.3 lb (about 135 g) |
Occidental Leather 5066 Cordless Drill Holster Description
All-leather, heavy-duty angled drill holster designed for comfort and quick access. Fits most cordless drills and includes two holders for drill/driver bits. Right-hand model 5066; left-hand version available as 5066LH.
Includes
- (1) Occidental Leather 5066 Cordless Drill Holster
Key Features
- All-leather, angled body for balanced, ergonomic access
- Fits most cordless drills
- Two dedicated drill/driver bit holders
- Premium full-grain leather construction
- Available in right- or left-hand orientations (5066 / 5066LH)
- Made in the USA
Applications
- Keep a cordless drill secured and accessible on your belt
- Hands-free carrying while climbing ladders or moving on site
- Carpentry, framing, electrical, and general construction tasks
- Quick access to driver bits during fastening work
Installation Overview
- Slide holster onto a compatible work belt.
- Position at preferred side for handed orientation.
- Insert drill into angled pocket and secure with the strap if desired.
- Store two bits in the integrated bit holders.
Specifications
| Material | Premium full-grain leather |
| Orientation | Right-hand (Left-hand available: 5066LH) |
| Pockets & Tool Holders | 3 |
| Bit Holders | 2 |
| Tool Compatibility | Fits most cordless drills |
| Made In | USA |
Occidental Leather 5040 Clip-On Hammer Holder Description
Secure your hammer with the Occidental Leather 5040 Clip-On Hammer Holder. Built from quality full-grain leather with a heavy-duty steel loop, it clips on fast for instant access without removing your belt. Made in the USA.
Occidental Leather 5040 Includes
- (1) Occidental Leather 5040 Clip-On Hammer Holder
Occidental Leather 5040 Features
- Clip-on design enables quick on/off installation anywhere
- Full-grain leather backing with high-strength steel loop
- Heavy-duty 2.5 inch loop accommodates most standard hammers
- Spring steel clip fits belts up to 2" wide
- Made in the USA
Occidental Leather 5040 Applications
- Hands-free hammer carry on tool belts
- Quick add-on holder for ladders, overhead, or mobile tasks
- Temporary or supplemental hammer storage without removing belt
- Jobsite use for pros and serious DIYers
Occidental Leather 5040 Installation Overview
- Slide the spring steel clip over a belt up to 2" wide.
- Position the holder at your preferred carry point.
- Seat the hammer in the steel loop and check balance.
- Confirm a secure fit before working.
Occidental Leather 5040 Specifications
| Materials | Full-grain leather backing; high-strength steel loop |
| Clip Compatibility | Spring steel clip fits belts up to 2" wide |
| Loop Size | 2.5" steel loop |
| Dimensions | Approx. 5" H x 3.5" W |
| Weight | 0.3 lb |
| Origin | Made in USA |
Occidental Leather 5008 Working Man’s Pant Belt
A rugged 1.5 in bridle leather pant belt built in the USA. Edge stitching enhances durability and appearance, and a heavy-duty 1.75 in steel roller buckle with a nickel finish delivers secure fastening.
Includes
- (1) 1.5 in Working Man’s Pant Belt
Key Features
- Extra heavy-duty bridle leather, custom tanned
- Edge stitched for strength and clean look
- Heavy-duty 1.75 in steel roller buckle, nickel finish
- Made in the USA
Applications
- Daily workwear belt for jobsite or shop
- Supports pants when carrying small holsters or accessories
- Durable casual belt for off-hours use
Installation Overview
- Lay your current belt flat and measure from buckle end to your most-used hole.
- Select the mid-range size closest to that measurement.
- If no belt to measure, add 4 in to pant waist for approximate mid-range.
- Choose size Small through XXX-Large based on chart below.
Specifications
| Material | Bridle leather |
| Width | 1.5 in |
| Buckle | 1.75 in steel roller, nickel finish |
| Made In | USA |
Sizing Chart
| Size | Mid Range | Approx. Pant Waist | Overall Length |
| Small | 34 in | 29–32 in | 41.5 in |
| Medium | 37 in | 33–35 in | 44.5 in |
| Large | 41 in | 36–39 in | 48.5 in |
| X-Large | 45 in | 40–44 in | 52.5 in |
| XX-Large | 49 in | 45–49 in | 57.5 in |
| XXX-Large | 53 in | 50–54 in | 61.5 in |
Occidental Leather 9501 Clip-On Nylon Pouch Description
Compact, clip-on fastener pouch designed for modular setups and quick swaps. Cost-efficient fastener management with a secure steel clip that fits belts up to 2" wide. Ideal for adding fastener storage or sub-dividing existing main bags. Dimensions: 5" x 4.5".
Occidental Leather 9501 Includes
- (1) Clip-On Nylon Pouch (Occidental Leather 9501)
Occidental Leather 9501 Features
- Cost-efficient fastener management
- Single clip-on design for fast application changes
- Keeps multiple pouches preloaded and organized
- Adds fastener storage or sub-divides larger bags
- Secure steel clip mounts to belts up to 2" wide; can clip to toolboxes or bags
- Compact and lightweight for tight setups
- Made in USA
Occidental Leather 9501 Applications
- Expand fastener storage on existing tool belts
- Organize task-specific screws, nails, and small parts
- Sub-divide main tool bags for better part separation
- Clip to toolbox or truck interior for on-the-go organization
Occidental Leather 9501 Installation Overview
- Verify the mounting surface (belt up to 2" wide, toolbox edge, or bag rim).
- Position the steel clip over the edge or belt.
- Press down until the clip fully engages and the pouch is secure.
- Load fasteners and confirm balanced, accessible placement.
Occidental Leather 9501 Specifications
| Dimensions | 5" W x 4.5" H |
| Material | Nylon |
| Mount Type | Steel clip fits belts up to 2" wide |
| Country of Manufacture | USA |
Occidental Leather 5047 Tape & Knife Holder Description
A compact leather holster that keeps a utility knife, two pencils, and a 35’ tape (or 25’ FatMax) close at hand without the bulk. Doubles as a reliable chalk line holder — ideal for quick tasks and finish work.
Occidental Leather 5047 Includes
- (1) 5047 Tape & Knife Holder
Occidental Leather 5047 Features
- All-in-one layout holds a utility knife, 2 pencils, and a tape measure
- Works great as a chalk line holster
- Slim, lightweight profile for tight spaces and finish tasks
- Durable, high-quality leather construction
- Made in the USA
- Fit tip: removing the tape clip may improve seating; leather breaks in over time
Occidental Leather 5047 Applications
- Finish carpentry and punch-list work
- Quick tasks needing only essential tools
- Organizing a tape, knife, pencils, and chalk line on a belt
Occidental Leather 5047 Installation Overview
- Thread your work belt through the holster slots and secure it.
- Load the tape measure, utility knife, and pencils into their pockets.
- Allow time for leather break-in; remove the tape clip if needed for a better fit.
Occidental Leather 5047 Specifications
| Material | Leather |
| Tool Capacity | Utility knife, 2 pencils, 35’ tape or 25’ FatMax, chalk line |
| Weight | 0.5 lb |
| Origin | USA |
| Model | 5047 |
| GTIN | 759244210606 |
NOTE: Leather needs a short break-in; tapes with rubberized shoulders may seat slowly and may require removing the tape clip for the best fit.
Occidental Leather 5137 Description
The 5137 Extra Large Tape Holster rides high on your belt for quick access and smooth mobility. Built from premium leather and sized specifically to secure 35' FatMax tape measures, it fits work belts up to 3″ wide and is handcrafted in the USA for long-term durability.
Occidental Leather 5137 Includes
- (1) Holster
Occidental Leather 5137 Key Features
- Belt-worn, high-mount design for improved mobility
- Sized for 35' FatMax tape measures
- Premium, durable leather construction
- Fits belts up to 3″ wide
- Handcrafted in the USA
Occidental Leather 5137 Applications
- Secure tape measure carry for framing & carpentry
- General construction measuring tasks
- Jobsite mobility where quick access is essential
- Tool belt organization for professional trades
Occidental Leather 5137 Installation Overview
- Slide the holster onto a work belt up to 3″ wide.
- Position high on the belt for comfortable reach.
- Insert your 35' FatMax tape into the pocket.
- Confirm secure fit before use.
Occidental Leather 5137 Specifications
| Size | Extra Large |
| Material | Premium leather |
| Belt Compatibility | Fits belts up to 3″ wide |
| Tape Fit | Designed for 35' FatMax |
| Made In | USA |
| Color Options | OxyRed, OxyBlack |
Occidental Leather 2006 Pocket Shield Description
Protect tool bags & vest pockets from sharp tools with the Occidental Leather 2006 Pocket Shield. This rigid polypropylene insert delivers smooth access and helps prevent punctures, extending the life of your gear.
Occidental Leather 2006 Includes
- (1) Pocket Shield
Occidental Leather 2006 Features
- Sharp tool protection — shields pouches from chisels, knives, scribes, and more
- Smooth access — keeps tools upright for quick grab-and-go
- Universal fit — drops into most tool bags, pockets, or vest compartments
- Durable polypropylene insert for daily jobsite use
- Made in the USA
Occidental Leather 2006 Applications
- Line tool pockets to prevent punctures from sharp edges
- Organize chisels, utility knives, and scribes in pouches
- Add protection to work vests and clip-on bags
- Extend the service life of tool bags through internal shielding
Occidental Leather 2006 Installation Overview
- Clear debris from the target pocket or pouch.
- Insert the Pocket Shield fully against the pocket wall.
- Place sharp tools inside, ensuring tips rest within the shield.
- Adjust orientation for smooth access and secure fit.
- Remove and relocate as needed across bags or vest pockets.
Occidental Leather 2006 Specifications
| Dimensions | 2" W x 6" H |
| Material | Polypropylene |
| Weight | 0.1 lb |
| Origin | Made in USA |
Occidental Leather 5545 Leather Nail Strip Holster Description
Durable, belt-worn holster designed to hold nail strips up to 16D. Handcrafted from heavy belting leather for long service life and quick access on the job.
Includes
- (1) Leather Nail Strip Holster
Key Features
- Belt-worn holster accepts nail strips up to 16D
- Heavy belting leather construction for durability
- Holds up to 8 racks for fewer reloads
- Loops onto belts up to 3″ wide
- Made in the USA
Applications
- Carry and organize nail strips for framing nailers
- Speed up reloads while keeping nails within reach
- Reduce pocket clutter and protect nail strips on the belt
Installation Overview
- Thread the holster onto a work belt up to 3″ wide.
- Insert nail strips (up to 16D) into the pouch.
- Position for preferred hand access and begin use.
Specifications
| Material | Heavy belting leather |
| Capacity | Holds up to 8 racks |
| Compatibility | Nail strips up to 16D |
| Fits Belt Width | Up to 3″ |
| External Dimensions | 4.5″ W x 7″ H |
| Internal Dimensions | 3.75″ W x 6.75″ H |
| Weight | 0.5–0.6 lb (approx.) |
| Country of Origin | USA |
Occidental Leather 5328 Description
Hand crafted from rugged 10 oz Latigo belting leather, the Occidental Leather 5328 Large Clip-On Phone Holster protects plus-size smartphones with an Italian-style drop clasp and a heavy-duty spring steel belt clip. Clips securely to belts up to 2" wide. Made in the USA.
Occidental Leather 5328 Includes
- (1) Occidental Leather 5328 Clip-On Leather Phone Holster (Large)
Occidental Leather 5328 Features
- 10 oz Latigo belting leather for durability
- Heavy-duty spring steel belt clip for secure attachment
- Italian-style drop clasp for protected, quick access
- Fits iPhone 6 Plus, 7 Plus & similarly sized phones (verify dimensions)
- Clips to belts up to 2" wide
- Made in the USA
Occidental Leather 5328 Applications
- Hands-free phone carry on work belts
- Protection for larger smartphones on jobsites
- Daily use for tradespeople, contractors, and field techs
Occidental Leather 5328 Installation Overview
- Clip the holster onto a belt up to 2" wide.
- Insert phone into the pouch.
- Close and secure the drop clasp.
- Verify the clip is firmly attached before use.
Occidental Leather 5328 Specifications
| Material | 10 oz Latigo belting leather |
| Clip Type | Heavy-duty spring steel |
| Closure | Italian-style drop clasp |
| Belt Fit | Up to 2" wide |
| Interior Dimensions | 7.0" H x 3.25" W x 0.75" D |
| Weight | 0.458 lb |
| Country of Origin | USA |
Occidental Leather 5022 Knee Pads Description
Comfortable, floor-safe knee protection made from top-grain leather. These pads use high-density cushioning with an internal plastic shield to disperse pressure and eliminate hot spots, plus quick-release fasteners for easy on/off.
Occidental Leather 5022 Includes
- (1) Pair of Occidental Leather 5022 Knee Pads
Occidental Leather 5022 Features
- Top-grain leather exterior for durability and comfort
- Non-marring design won’t scuff finished floors
- Thick high-density padding for all-day support
- Internal plastic shield helps eliminate pressure points
- Quick-release fasteners for rapid on/off
- Made in USA
Occidental Leather 5022 Applications
- Flooring installs without scuffing surfaces
- Trim and finish carpentry
- Cabinetry work
- Interior remodeling tasks
- General low-height work where knee comfort matters
Occidental Leather 5022 Installation Overview
- Place pads over knees with straps positioned behind the leg.
- Engage quick-release fasteners and tighten to a secure, comfortable fit.
- Check alignment; ensure padding and shield sit centered on the knee.
- Test mobility and readjust straps as needed.
- Release fasteners to remove when finished.
Occidental Leather 5022 Specifications
| Material | Top-grain leather exterior |
| Padding | High-density cushioning |
| Internal Shielding | Plastic insert to disperse pressure |
| Fasteners | Quick-release straps |
| Design | Non-marring, floor-safe |
| Origin | Made in USA |
| Weight | 1.2 lb (pair) |
Occidental Leather 5026 Utility Rectangular Loop Description
Upgrade any tool belt with a compact leather attachment point. The Occidental Leather 5026 provides a secure place to clip tape measures, meter cases, and clip-on bags. It fits belts up to 3" wide and accepts clips up to 1" wide for fast, dependable access. Made in the USA.
Occidental Leather 5026 Includes
- (1) Occidental Leather 5026 Utility Rectangular Loop
Occidental Leather 5026 Features
- Versatile clip-on attachment point for tape measures, clip-on bags, and meter cases
- Fits work belts up to 3" wide
- Accepts clips up to 1" wide
- Premium leather strap with rivet reinforcement
- Rectangular metal loop hardware for secure clipping
- Lightweight, low-profile design (approx. 0.1 lb)
- Made in USA
Occidental Leather 5026 Applications
- Add a clip-on anchor point to a compatible work belt
- Keep tape measures and small tools within easy reach
- Hang clip-on pouches or meter cases to expand storage
- Organize frequently used accessories at your side
Occidental Leather 5026 Installation Overview
- Slide the loop onto a work belt up to 3" wide.
- Position it on the belt where access is most convenient.
- Clip your accessory to the rectangular metal loop.
- Confirm the accessory’s clip is 1" wide or less.
- Test the attachment for a secure hold before use.
Occidental Leather 5026 Specifications
| Manufacturer | Occidental Leather |
| SKU | 5026 |
| GTIN | 759244143706 |
| Belt Compatibility | Fits belts up to 3" wide |
| Clip Compatibility | Accepts clips up to 1" wide |
| Material | Leather strap with metal rectangular loop |
| Weight | 0.1 lb |
| Country of Origin | USA |
Occidental Leather 8567 Description
Keep your cordless drill secure and accessible with the Occidental Leather 8567 Belt Worn Nylon Drill Holster. This compact, hybrid nylon & leather carrier fits a 3" belt and works with popular Bosch, Hitachi, Makita, and Milwaukee models, offering 4 pockets/tool holders for bits and small tools. Made in the USA.
Occidental Leather 8567 Includes
- (1) Drill Holster
Occidental Leather 8567 Key Features
- Fits 3" belts for stable, belt-worn carry
- Compatible with Bosch PS20-02, 3318-2G, 33614-26, 23612 Impactor; Hitachi WH12DAF2; Makita 18V LXT Impact Drivers, BTD 142HW, and 18V drills; Milwaukee 18V Lithium BDT 140, LXT 18V drills
- Hybrid build — durable nylon body reinforced with leather
- 4 pockets/tool holders for drill, bits, fasteners, and small tools
- Lightweight design at 0.5 lbs
- Slides easily onto most standard tool belts
- Made in the USA
Occidental Leather 8567 Applications
- Framing and general construction
- Punch-out and finish work
- Electrical & service technician tasks
- Remodeling and jobsite tool organization
Occidental Leather 8567 Installation Overview
- Slide the holster onto your tool belt (fits 3" belts).
- Insert the drill/driver into the main pocket.
- Secure using the snap strap.
- Load bits and small tools into the front holders.
- Confirm a snug fit before working.
Occidental Leather 8567 Specifications
| Pockets & Tool Holders | 4 |
| Fits Belt Size | 3" |
| Material | Nylon with leather reinforcement |
| Weight | 0.5 lbs |
| Made In | USA |
| Compatibility | Bosch PS20-02, 3318-2G, 33614-26, 23612 Impactor; Hitachi WH12DAF2; Makita 18V LXT, BTD 142HW, 18V drills; Milwaukee 18V Lithium BDT 140, LXT 18V drills |
Occidental Leather 9504 Description
The Clip-On 7 Nylon Pouch delivers cost-efficient tool and fastener organization in a compact, lightweight design. With 7 pockets and holders for pencils, a utility knife, and an angle square, its ideal for small jobs, repairs, or DIY weekend projectsand clips quickly to belts or waistbands up to 2" wide. Made in the USA.
Occidental Leather 9504 Includes
- (1) Occidental Leather 9504 Clip-On 7 Nylon Pouch
Occidental Leather 9504 Features
- Cost-efficient fastener and tool management
- Versatile multi-pouch layout with holders for pencils, utility knife, and angle square
- Quick clip-on attachment to belts or waistbands up to 2" wide
- Lightweight, jobsite-tough nylon construction
- Made in the USA
Occidental Leather 9504 Applications
- Small tasks and punch-list work
- Trim and finish carpentry essentials
- Maintenance and repair duties
- Weekend DIY projects
- Service calls where minimal tools are needed
Occidental Leather 9504 Installation Overview
- Attach: Clip the pouch to a belt or waistband up to 2" wide.
- Load: Place fasteners and small tools into the main and outer bags.
- Organize: Use dedicated holders for pencil, utility knife, and angle square.
- Check: Ensure the clip is fully seated and the pouch is secure before use.
- Remove: Unclip when finished and store in a dry place.
Occidental Leather 9504 Specifications
| Pockets & Tool Holders | 7 |
| Main Bag | 7.5" W x 6" H |
| Outer Bags | 5" W x 5.5" H |
| Fits Belt Width | Up to 2" |
| Material | Nylon |
| Weight | 0.7 lb |
| Made In | USA |
| GTIN | 759244175004 |
Occidental Leather 5156 Description
The Occidental Leather 5156 is a traditional steel cradle hammer holder designed for narrow belt setups. It features a 2" belt slot compatible with the 2" Leather Work Belt (Model 5002) and the rear strap of the Stronghold Beltless System. The steel cradle is riveted to extra-heavy full-grain leather for long-lasting durability and stable carry.
Occidental Leather 5156 Includes
- (1) 2" Cradle Hammer Holder (Occidental Leather 5156)
Occidental Leather 5156 Key Features
- Steel hammer cradle for secure, stable carry
- Riveted to extra-heavy full-grain leather back
- 2" slot sized for narrow belts and Stronghold Beltless rear strap
- Compact profile reduces swing and shifting
- Made in the USA
Occidental Leather 5156 Applications
- Everyday hammer carry on 2" work belts
- Use with Stronghold Beltless System rear strap
- Framing and carpentry where quick access is needed
- Compact belt rigs that demand minimal swing
Occidental Leather 5156 Installation Overview
- Thread a 2" belt or Stronghold Beltless rear strap through the slots.
- Position holder for preferred reach and balance.
- Secure belt around waist.
- Insert hammer and confirm stable, comfortable carry.
Occidental Leather 5156 Specifications
| Material | Steel cradle riveted to extra-heavy full-grain leather |
| Belt Slot Width | 2 in. |
| Compatibility | 2" Leather Work Belt (5002); Stronghold Beltless System rear strap |
| Weight | 0.4 lb |
| Origin | Made in USA |
| Model | 5156 |
Occidental Leather 5028 Single Snip Holster Description
Compact, full-grain leather snip holster originally built for steel framers. Sized for WISS aviation snips and many small tools, with a rigid, low-swing carry that slides securely onto belts up to 3" wide. Handcrafted in the USA.
Occidental Leather 5028 Includes
- (1) Occidental Leather 5028 Single Snip Holster
Occidental Leather 5028 Features
- Multi-use pouch designed for snips; also fits various small tools
- Rigid leather build for a secure, low-swing carry
- Slides onto belts up to 3" wide for a stable fit
- Durable full-grain leather construction
- Handcrafted in the USA
Occidental Leather 5028 Applications
- Steel framing and metal stud work
- Carpentry and general contracting
- Daily belt carry for aviation snips and similar tools
- Low-swing hammer or tool carry alternative
Occidental Leather 5028 Installation Overview
- Slide the holster onto a belt up to 3" wide.
- Insert snips or a compatible tool fully into the pocket.
- Check clearance and secure positioning before use.
- Periodically clear debris and verify fit.
Occidental Leather 5028 Specifications
| Material | Full-grain leather |
| Dimensions | 2.75" W x 5.5" H |
| Belt Compatibility | Fits belts up to 3" wide |
| Weight | 0.3 lb |
| Country of Origin | USA |
| Compatibility | WISS aviation snips (models vary) |
Occidental Leather 9502 Description
Optimize organization with the Occidental Leather 9502 Double Clip-On Nylon Pouch. Provides expanded fastener storage and a leather clip-on patch for small tools or a phone. Clips to belts up to 2″ wide or toolboxes for modular, cost-efficient storage.
Occidental Leather 9502 Includes
- (1) Occidental Leather 9502 Double Clip-On Nylon Pouch
Occidental Leather 9502 Features
- Double clip-on design adds fastener capacity and subdivides existing bags
- Leather clip-on patch ideal for phone, notebook, or small tools
- Clips securely to belts up to 2″ or to toolboxes
- Industrial nylon construction for lightweight durability
- Made in the USA
Occidental Leather 9502 Applications
- Add-on fastener storage for existing tool belts
- Organize small tools & hardware on the job
- Sub-divide main bags for better workflow
- Preload and clip to toolbox or truck for quick access
- Use on work belts up to 2″ wide
Occidental Leather 9502 Installation Overview
- Position pouch clip on a work belt up to 2″ wide or on a toolbox edge.
- Secure the clip fully and check for a tight hold.
- Load fasteners or small tools into the main and outer bags.
- Optionally use it to sub-divide items in your primary bags.
- Remove and store when not in use.
Occidental Leather 9502 Specifications
| Main Bag Dimensions | 5″ W x 7″ H |
| Outer Bag Dimensions | 5″ W x 5.5″ H |
| Weight | 0.5 lb |
| Compatibility | Clips to belts up to 2″ wide; toolbox clip-on |
| Material | Industrial nylon with leather patch |
| Country of Origin | USA |
Occidental Leather 5032 Description
Compact, all-leather tapered holster designed to secure an ironworker’s bull pin or nail bar on your belt. Handcrafted in the USA for durable, reliable carry with quick access on the job.
Occidental Leather 5032 Includes
- (1) Occidental Leather 5032 Tapered Tool Holster
Occidental Leather 5032 Key Features
- All-leather construction built for tough jobsite use
- Tapered design securely holds bull pins or nail bars
- Slides onto belts up to 3" for comfortable, hands-free carry
- Handcrafted in the USA
- Compact size for minimal swing and quick access
Occidental Leather 5032 Applications
- Bull pin carry for ironworkers and steelworkers
- Nail bar storage on tool belts
- Jobsite belt accessory for organized tool access
- Daily use in construction and industrial settings
Occidental Leather 5032 Installation Overview
- Slide the holster onto a belt up to 3" wide.
- Position at preferred carry location for access.
- Insert bull pin or nail bar into tapered pocket.
- Check retention and adjust belt placement as needed.
- Inspect stitching and rivets periodically for wear.
Occidental Leather 5032 Specifications
| Material | Premium leather |
| Dimensions (W x H) | 1.75" x 6.5" |
| Weight | 0.2 lbs |
| Belt Fit | Up to 3" belt |
| Color Options | OxyRed, OxyBlack |
| Origin | Made in USA |
Occidental Leather 5010 Leather Utility Snap Description
Keep your essential tools within easy reach with this compact leather loop and safety release snap. Slides onto most belts to position saw keys, wrenches, and other small tools where you need them.
Occidental Leather 5010 Includes
- (1) Leather Utility Snap (5010)
Occidental Leather 5010 Features
- 1″ wide full-grain leather loop with safety release snap
- Quick access for saw keys, hex wrenches, tag tools, and more
- Slides onto most standard work belts
- Durable leather construction with metal snap hardware
- Lightweight, low-profile accessory — Made in USA
Occidental Leather 5010 Applications
- Quick-access storage for small hand tools
- Organizing keys and tag tools on a work belt
- Adding utility to tool belts, vests, and rigs
Occidental Leather 5010 Installation Overview
- Slide the leather loop onto your belt or rig.
- Position it where it is most accessible.
- Clip your tool or key to the safety snap and verify it is secure.
Occidental Leather 5010 Specifications
| Loop Width | 1″ leather strap |
| Material | Full-grain leather with metal safety snap |
| Belt Fit | Slides onto most standard work belts |
| Snap Type | Safety release snap hook |
| Colors | Black, OxyRed |
| Country of Manufacture | USA |
Occidental Leather 9005 Belt Buddy Description
Add comfortable lower back support to your tool belt with the Occidental Leather 9005 Belt Buddy. This high-density foam pad features a polyethylene stiffener wrapped in durable industrial nylon and is designed to fit under a third bag or hammer holder for all-day comfort.
Includes
- (1) 9005 Belt Buddy Pad
Key Features
- Lower back support pad for enhanced comfort during long wear
- Fits under a third bag or hammer holder on most work belts
- High-density foam with polyethylene stiffener for stability
- Industrial nylon exterior for durability
- Made in USA
Applications
- Add lumbar support to existing tool belts
- Use beneath a fastener bag or hammer holder without bulk
- Improve comfort for prolonged standing or bending tasks
- General carpentry, framing, finish work, and jobsite use
Installation Overview
- Remove or loosen adjacent bags/holders on your work belt.
- Thread the Belt Buddy onto the belt and center it at the lower back.
- Reattach the third bag or hammer holder over the pad as desired.
- Adjust belt fit for comfort and support.
Specifications
| Brand | Occidental Leather |
| Model/SKU | 9005 |
| Material | High-density foam core, polyethylene stiffener, industrial nylon cover |
| Color | Black |
| Weight | 0.3 lb |
| Country of Origin | USA |
Occidental Leather 5518 No Slap Hammer Holder Description
Secure and stabilize your hammer with the all-leather No Slap Hammer Holder. The long sleeve-style design keeps handles upright to minimize swing and prevent “knee-capping,” while fitting belts up to 3” wide. Built from heavy-duty leather and made in the USA.
Includes
- (1) Occidental Leather 5518 No Slap Hammer Holder
Key Features
- Long sleeve design reduces tool swing and keeps handles secure
- All-leather construction for durability
- Holds hammers, hammer tackers, and flat bars (up to 1 5/8” diameter)
- Fits work belts up to 3” wide
- Made in the USA
Applications
- Carry and secure hammers while walking or climbing
- Hold hammer tackers and flat bars without excessive swinging
- Ideal for framing, carpentry, and general construction
Installation Overview
- Thread the holder onto a belt up to 3” wide.
- Position the sleeve at your preferred carry location.
- Insert the tool handle fully into the leather sleeve.
- Verify secure fit and minimal swing during movement.
Specifications
| Material | Heavy-duty leather |
| Tool Capacity | Hammers, tackers, flat bars up to 1 5/8” diameter |
| Belt Compatibility | Up to 3” wide |
| Weight | 0.3 lb |
| Country of Origin | USA |
Occidental Leather 6568 Description
All-leather clip-on case with a secure snap closure to protect and carry your construction calculator. Designed to fit Construction Master models I–IV and other similar calculators; clip-on attachment for fast on/off access.
Occidental Leather 6568 Includes
- (1) Clip-on leather construction calculator case
Occidental Leather 6568 Features
- All-leather construction with reinforced stitching for durability
- Secure snap closure keeps devices protected
- Clip-on attachment for quick belt or pocket mounting
- Fits Construction Master models I, II, III, IV and other brands
- Also available as a belt-worn model (5068)
Occidental Leather 6568 Applications
- Carry and protect construction calculators on the jobsite
- Quick access to calculator during layout and measurement tasks
- Hands-free storage while climbing ladders or moving materials
Occidental Leather 6568 Installation Overview
- Insert calculator into the case.
- Close the flap and snap to secure.
- Slide the metal clip over your belt or waistband until fully seated.
- Verify the case is firmly attached before working.
Occidental Leather 6568 Specifications
| Material | All-leather |
| Closure | Snap |
| Attachment | Clip-on |
| Compatibility | Construction Master I–IV and other brands |
| Dimensions | 3.5" W x 5.5" H x 1.25" D |
| Weight | 0.3 lb |
| Made In | USA |
| Color | OxyRed (clip-on) |
Occidental Leather 8505 Description
Clip-on nylon tool holder keeps go-to tools at hand. Features 4 total pockets sized for a utility knife, pencils and a 35’ tape (accepts FatMax). Compact 4.5" x 9" design for quick access on belt or pocket.
Occidental Leather 8505 Includes
- (1) 8505 Clip-On Nylon Tool Holder
Occidental Leather 8505 Key Features
- Clip-on mount fastens to belt or pocket
- 4 pockets for utility knife, pencils, and 35’ tape
- Lightweight, jobsite-tough design
- Made in the USA
Occidental Leather 8505 Applications
- Keep tape, knife, and pencils within reach while working
- Add-on clip pouch for belts, pockets, or vests
- Organized storage for measuring and marking tasks
Occidental Leather 8505 Installation Overview
- Attach the clip to your belt or pocket.
- Load tools into the designated pockets.
- Verify secure fit and adjust position for comfort.
Occidental Leather 8505 Specifications
| Pockets & Holders | 4 |
| Dimensions | 4.5" W x 9" H |
| Weight | 0.2 lb |
| Mount Type | Clip-on |
| Tape Compatibility | 35’ tape, FatMax accepted |
| Country of Origin | Made in USA |
Occidental Leather 5031 Leather Utility Dee Description
Keep testers and small tools secured to your belt. The Occidental Leather 5031 Leather Utility Dee provides a durable attachment point for spring snaps and accessories, fitting work belts up to 3 inches wide and featuring a 3/4 inch dee ring.
Occidental Leather 5031 Includes
- (1) Leather Utility Dee
Occidental Leather 5031 Features
- Belt-worn dee provides a secure snap point for tools and testers
- Fits work belts up to 3″ wide
- 3/4″ dee ring sized for common spring snaps
- Leather strap with metal hardware for durability
Occidental Leather 5031 Applications
- Attaching telephone butt-sets and testers
- Securing small tools with spring snaps
- Adding an auxiliary connection point to a work belt
Occidental Leather 5031 Installation Overview
- Slide the leather loop onto a work belt up to 3″ wide.
- Position at the desired location on the belt.
- Attach your tool’s spring snap or lanyard to the 3/4″ dee ring.
- Verify the snap is fully engaged before use.
Occidental Leather 5031 Specifications
| Model | 5031 |
| Fits Belt Width | Up to 3″ |
| Dee Ring Size | 3/4″ |
| Material | Leather with metal dee ring |
Occidental Leather 5013 Shear Holster Description
Keep essential cutting tools at your side with the Occidental Leather 5013 Shear Holster. This USA–made leather sheath provides a snug, low?profile carry for most pliers, side cutters, and pruning shears, making it ideal for jobsite, landscaping, and garden use. Threads onto belts up to 3″ wide for quick access and all?day comfort.
Includes
- (1) Shear Holster
Key Features
- Universal fit for most pliers, side cutters, and pruning shears (including popular Felco models)
- Compact, low?profile design keeps tools secure & easy to reach
- Premium leather construction built for rugged daily use
- Fits belts up to 3″ wide
- Made in the USA
Applications
- Tool belt carry for pliers and side cutters on the jobsite
- Pruning and garden maintenance with shears
- Landscaping & groundskeeping
- Field service and repair work requiring quick tool access
- General construction and DIY projects
Installation Overview
- Confirm your tool fits the holster (pliers, side cutters, or pruning shears).
- Thread the holster onto a belt up to 3″ wide.
- Position on your preferred side for dominant?hand access.
- Insert the tool with blades closed and seat it fully.
- Check retention and adjust holster position for comfort and reach.
Specifications
| Material | Leather |
| Dimensions | 2.75″ W x 5.5″ H |
| Belt Compatibility | Fits belts up to 3″ wide |
| Tool Compatibility | Pliers, side cutters, pruning shears |
| Country of Origin | USA |
| Model | 5013 |
Occidental Leather 5025 Plier & Tool Holster Description
Compact, full?grain leather holster with an open-bottom design for pliers, side cutters, crimpers, and 10–24 oz plumb bobs. Built light yet durable for everyday field use and minimal bulk on your belt. Made in the USA.
Occidental Leather 5025 Includes
- (1) Occidental Leather 5025 Plier & Tool Holster
Occidental Leather 5025 Features
- Open-bottom design helps shed debris and fits longer tools
- Holds pliers, side cutters, crimpers, and 10–24 oz plumb bobs
- Premium full?grain leather construction for long service life
- Compact profile reduces swing and bulk on your belt
- Made in the USA
Occidental Leather 5025 Applications
- Keep pliers and cutters accessible for electrical and telecom work
- Carry a plumb bob for layout, framing, or surveying tasks
- General tool belt organization with a slim holster footprint
Occidental Leather 5025 Installation Overview
- Slide the holster onto your work belt at the desired position.
- Secure belt snugly to limit swing and maintain access.
- Insert pliers, cutters, or plumb bob—long tools pass through the open bottom.
- Verify tools seat securely and adjust position for comfort.
Occidental Leather 5025 Specifications
| Material | Full?grain leather |
| Dimensions | 2.5" W x 5" H |
| Weight | 0.3 lb |
| Design | Open-bottom |
| Compatibility | Pliers, side cutters, crimpers, 10–24 oz plumb bobs |
| Origin | Made in the USA |
| UPC | 759244008104 |
Occidental Leather 8578 Description
The Clip-On Stronghold® Essentials Gear Pocket (Model 8578) mounts to the chest of Stronghold suspenders using a durable spring steel clip, keeping small tools and your smartphone secure and within easy reach. It features a padded phone sleeve with velcro flap, holders for pencils and a notepad, plus a divided pocket for driver bits. Made in the USA.
Occidental Leather 8578 Includes
- (1) 8578 Clip-On Stronghold Essentials Gear Pocket
Occidental Leather 8578 Key Features
- Clip-on mount with spring steel clip for chest attachment to Stronghold suspenders
- Padded smartphone sleeve with velcro flap for secure carry
- Organizers for pencils, notepad, and driver bits
- Seven total pockets/tool holders
- Easy to install and remove
- Made in the USA
Occidental Leather 8578 Applications
- Chest-mounted storage on Stronghold suspenders
- Quick access to phone, pencils, notepad, and driver bits
- Staying organized while climbing ladders or moving on the jobsite
- Lightweight carry for everyday trade essentials
Occidental Leather 8578 Installation Overview
- Position the spring steel clip over the chest strap of Stronghold suspenders.
- Press to fully seat the clip until the pocket is secure.
- Load tools, phone, and accessories into the designated sleeves.
- Close the phone flap and check retention before use.
- Remove by lifting the clip when you need to reposition or store.
Occidental Leather 8578 Specifications
| Total Pockets/Holders | 7 |
| Overall Dimensions | 9.75" W x 7.5" H |
| Weight | 0.385 lbs |
| Attachment | Clip-on with spring steel clip |
| Phone Sleeve | Padded with velcro flap |
| Country of Manufacture | USA |
Occidental Leather 8574 Description
Handcrafted clip-on leather phone holster with heavy-duty elastic sides and a secure Velcro® closure. Designed for compact phones such as iPhone 6/7/8/X and Galaxy S6/S7/S9 (not Plus/Max sizes). Includes a 2” spring steel belt clip for fast attachment to belts or waistbands. Made in the USA.
Occidental Leather 8574 Includes
- (1) Clip-On Expandable Phone Holster
Occidental Leather 8574 Features
- Velcro® closure for quick, secure access
- Expandable elastic sides — up to 1-1/2” of flex
- 2” spring steel belt clip for firm attachment
- Handcrafted full-grain leather construction
- Made in the USA
Occidental Leather 8574 Applications
- Daily carry on belt or waistband
- Jobsite phone protection and quick access
- Secure storage for compact smartphones
- Walking, commuting, and on-the-go use
Occidental Leather 8574 Installation Overview
- Slide or clip the 2” steel clip onto belt/waistband.
- Place phone into the pocket.
- Close the flap and press the Velcro® to secure.
- Confirm a snug fit before use.
Occidental Leather 8574 Specifications
| Material | Leather with elastic side panels |
| Belt Clip | 2” spring steel |
| Pocket Size | 3.5” x 5.5” |
| Expandability | Elastic sides expand up to 1-1/2” |
| Compatibility | Compact phones (e.g., iPhone 6/7/8/X; Galaxy S6/S7/S9); not for Plus/Max sizes |
| Country of Origin | USA |
| Weight | 0.2 lb |
| SKU | 8574 |
| GTIN | 759244326208 |
Occidental Leather 5527 Offset Snip Holster Description
Keep offset snips and pruning shears secure and close at hand. This full-grain leather holster fits popular offset metal snips such as Wiss M6/M7 and similar tools, accepts belts up to 3″ wide, and is proudly made in the USA.
Occidental Leather 5527 Includes
- (1) Offset Snip Holster
Occidental Leather 5527 Features
- Designed for offset metal snips (Wiss M6/M7) & pruning shears
- Full-grain American leather construction for durability
- Works with belts up to 3″ wide for stable carry
- Compatible with Oxy™ Tool Shield for added protection
- Made in the USA
Occidental Leather 5527 Applications
- Steel framing and sheet metal work
- General contracting and remodeling
- Landscaping and pruning tasks
- DIY projects requiring frequent snip use
Occidental Leather 5527 Installation Overview
- Slide holster onto a work belt up to 3″ wide.
- Seat the holster in your preferred position for easy reach.
- Insert offset snips or pruning shears into the pouch.
- Optionally add an Oxy™ Tool Shield for extra liner protection.
Occidental Leather 5527 Specifications
| Material | Full-grain American leather |
| Dimensions | 4″ W x 7.75″ H |
| Belt Compatibility | Up to 3″ wide |
| Weight | Approx. 0.3 lb (145 g) |
| Fits Tools | Offset snips (Wiss M6/M7) & pruning shears |
| Origin | Made in USA |
Occidental Leather 9511 Deep Clip-On Pouch Description
Fast, flexible fastener storage that clips on and goes. Slightly deeper and narrower than the 9501, this compact pouch keeps nails, screws, and small parts at the ready and can clip to belts up to 2" wide, a toolbox, or your truck for grab-and-go efficiency. Made in the USA.
Occidental Leather 9511 Includes
- (1) Deep Clip-On Pouch
Occidental Leather 9511 Features
- Cost-efficient fastener management
- Single clip-on design enables quick swaps between tasks
- Deeper, narrower profile than model 9501 for added capacity with a compact footprint
- Heavy-duty clip secures to belts up to 2" wide; also clips to toolboxes or truck interiors
- Quick-access storage for nails, screws, and small fasteners
- Made in the USA
Occidental Leather 9511 Applications
- Carry and organize nails, screws, and small hardware
- Create modular, swap-in/out fastener setups by task
- Clip-on storage for belts, toolboxes, or vehicle interiors
- General carpentry, framing, finish work, and DIY projects
Occidental Leather 9511 Installation Overview
- Attach the pouch clip to a work belt up to 2" wide or a secure edge on a toolbox/truck panel.
- Load with fasteners and ensure the pouch is seated and balanced.
- Verify the clip is fully engaged before use.
Occidental Leather 9511 Specifications
| Dimensions | 5" W x 6" H x 3" D |
| Belt Fit | Clips onto work belts up to 2" wide |
| Weight | 0.25 lbs |
| Made in | USA |
| GTIN | 759244224405 |
Showing 40/53
