Occidental Leather
Occidental Leather 461020 M Sawdust Sage Carpenter Set Medium
Occidental Leather 461020 M Description
The Carpenter Set is a versatile nylon tool belt system built for efficiency and comfort from framing through finish work. Constructed with 1000 Denier CORDURA® nylon and military-grade webbing, this medium-size set features a contoured belt with metal COBRA buckles, dedicated tool and fastener sides, and a padded hammer sleeve.
Includes
- (1) Carpenter Tool Belt Set
Key Features
- Tool side: 5 tool slots in main pouch — three along inside back and two inside front; single outside lower pouch with tool slot; rear tool loop; pencil/utility combo with three small slots and one deep pocket
- Fastener side: 3 elastic nail-set slots in tape pouch; speed square slot; lower tool slot; side-by-side outer pouches; slots in each fastener pouch; reinforced bar slot on bag underside
- Metal COBRA buckles; contoured belt design for secure fit
- American-made foam, tactical webbing, military-grade hardware, and heavyweight thread
- 1000 Denier CORDURA® nylon with water-repellent coating; reinforced pouch bottoms for puncture & abrasion resistance
- Padded hammer sleeve on the tool side; lightweight and durable
Applications
- General carpentry and remodeling
- Framing tasks requiring high-capacity fastener storage
- Finish work with organized tool access
- Jobsite setup needing durable, water-repellent nylon gear
- Daily use across multiple trades
Installation Overview
- Select the medium size and position the contoured belt pad around your waist.
- Secure the metal COBRA buckle and adjust the webbing for a snug fit.
- Arrange tool and fastener bags to your dominant/non-dominant sides.
- Load pouches and slots with tools, fasteners, and a hammer in the padded sleeve.
- Verify balance and comfort; re-adjust belt tension as needed.
Specifications
| Size | Medium |
| Padded Portion of Belt | 33" (84 cm) |
| Belt Height Measurement | 34" – 38" (86 – 96 cm) |
| Color | Sawdust Sage |
| Type | Carpenter Set |
| Material | 1000D CORDURA® nylon with water-repellent coating |
| Buckle | Metal COBRA |
| Country of Origin | USA |
| Weight | 0.15 lbs |
Occidental Leather 461020 M Sawdust Sage Carpenter Set Medium
Medium Carpenter Tool Belt Set — Sawdust Sage
✓ Contoured belt with metal COBRA buckle
✓ 1000D CORDURA nylon with water-repellent coating
✓ Tool side 5-slot main pouch & pencil/utility combo
✓ Fastener side speed square slot & reinforced bar slot
✓ Padded hammer sleeve — lightweight & durable
Out of stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Care and Maintenance (1000D CORDURA nylon tool belt with webbing, foam padding, and metal/plastic hardware)
- After each use, shake or brush off sawdust and dirt from pouches and belt.
- Spot clean or hand wash with mild soap in lukewarm water using a soft brush or cloth.
- Do not use bleach, harsh solvents, or fabric softeners.
- Rinse thoroughly to remove soap residue.
- Air-dry completely away from direct heat or prolonged sunlight; do not tumble dry, iron, or dry clean.
- Avoid prolonged soaking of the padded/foam sections and do not machine wash.
- To maintain the water-repellent finish on the CORDURA nylon, re-treat periodically with a DWR spray suitable for nylon if water no longer beads (test on a small area first).
- Keep the COBRA buckle and other hardware clean and free of grit; check that the buckle operates smoothly and securely before use.
- Store in a cool, dry place; hang the belt so pouches can air out and dry between uses. Keep away from oils and chemicals.
- Inspect stitching, webbing, and reinforcements regularly and discontinue use if excessive wear or damage is observed.
- Organized Tool Side – 5 main-pouch tool slots, outer lower pouch with tool slot, rear tool loop, pencil/utility combo with small slots & deep pocket
- Efficient Fastener Side – Elastic nail-set slots, speed square slot, lower tool slot, dual outer pouches, reinforced underside bar slot
- Built for Durability – 1000D CORDURA® nylon, American-made foam, tactical webbing, military-grade hardware, heavyweight thread
- Secure Fit – Contoured belt with metal COBRA buckles; padded hammer sleeve
- Lightweight Construction – Water-repellent fabric with reinforced pouch bottoms
- Size: Medium | Padded Belt: 33" | Belt Height: 34"–38" | Color: Sawdust Sage | Made in USA
More About Occidental Leather 461020 M Sawdust Sage Carpenter Set Medium
Occidental Leather 461020 M Description
The Carpenter Set is a versatile nylon tool belt system built for efficiency and comfort from framing through finish work. Constructed with 1000 Denier CORDURA® nylon and military-grade webbing, this medium-size set features a contoured belt with metal COBRA buckles, dedicated tool and fastener sides, and a padded hammer sleeve.
Includes
- (1) Carpenter Tool Belt Set
Key Features
- Tool side: 5 tool slots in main pouch — three along inside back and two inside front; single outside lower pouch with tool slot; rear tool loop; pencil/utility combo with three small slots and one deep pocket
- Fastener side: 3 elastic nail-set slots in tape pouch; speed square slot; lower tool slot; side-by-side outer pouches; slots in each fastener pouch; reinforced bar slot on bag underside
- Metal COBRA buckles; contoured belt design for secure fit
- American-made foam, tactical webbing, military-grade hardware, and heavyweight thread
- 1000 Denier CORDURA® nylon with water-repellent coating; reinforced pouch bottoms for puncture & abrasion resistance
- Padded hammer sleeve on the tool side; lightweight and durable
Applications
- General carpentry and remodeling
- Framing tasks requiring high-capacity fastener storage
- Finish work with organized tool access
- Jobsite setup needing durable, water-repellent nylon gear
- Daily use across multiple trades
Installation Overview
- Select the medium size and position the contoured belt pad around your waist.
- Secure the metal COBRA buckle and adjust the webbing for a snug fit.
- Arrange tool and fastener bags to your dominant/non-dominant sides.
- Load pouches and slots with tools, fasteners, and a hammer in the padded sleeve.
- Verify balance and comfort; re-adjust belt tension as needed.
Specifications
| Size | Medium |
| Padded Portion of Belt | 33" (84 cm) |
| Belt Height Measurement | 34" – 38" (86 – 96 cm) |
| Color | Sawdust Sage |
| Type | Carpenter Set |
| Material | 1000D CORDURA® nylon with water-repellent coating |
| Buckle | Metal COBRA |
| Country of Origin | USA |
| Weight | 0.15 lbs |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
