Now Trending

Occidental Leather B5060 Features

• Three pouch stacked layout for fastener organization
• Dedicated holders for 1 inch blade square, angle square, cats paw loop, and driver bits
• Premium leather construction for long term durability
• Recommended for framing and general carpentry
• Left hand option available as 5060LH

Occidental Leather B5060 Applications

• Framing tasks requiring quick access to nails and layout tools
• General carpentry fastener and tool organization
• Jobsite setup where squares, bits, and pry tools need dedicated storage

Occidental Leather B5060 Installation Overview

1. Thread the bag onto a compatible work belt.
2. Choose side based on hand preference and workflow.
3. Load fasteners into main and outer pouches.
4. Place layout tools and bits into the dedicated holders.
5. Check balance and adjust position on belt for comfort.

Occidental Leather 8062LH Features

• Popular OxyLights fastener bag for framing and general carpentry
• Left handed layout worn on the right side
• Holders for 1 inch blade square, angle square, cat's paw loop, driver bits
• Premium leather and industrial nylon construction
• Made in USA

Occidental Leather 8062LH Applications

• Framing tool and fastener organization
• General carpentry tasks
• Left handed jobsite setup worn on right side

Occidental Leather 8062LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Wear on the right side for left handed access.
3. Place squares, bits, and small tools into designated holders.
4. Load fasteners into the main and secondary pouches.
5. Check balance and adjust position for comfort.

Occidental Leather 9850LH Features

• Adjust-to-Fit belt allows seasonal clothing changes
• D-rings pre-installed for use with suspension systems
• Hand-specific tool holders for efficient workflow
• FatLip bag design with leather-reinforced corners and bottoms
• Left-handed layout (also available as 9850 for right-handed)

Occidental Leather 9850LH Applications

• Framing and general carpentry
• Production carpentry setups
• Jobsite tool organization and fastener storage
• Use with suspenders for heavy-load days

Occidental Leather 9850LH Installation Overview

1. Measure pant waist and set belt to the appropriate Adjust-to-Fit range.
2. Position left- and right-side bags for preferred reach.
3. Secure hammer holder and tool shield to belt as needed.
4. Load tools and fasteners; verify balance and comfort.
5. Attach suspenders to pre-installed D-rings if desired.

Occidental Leather B5018DB Key Features

• Right-side layout for tools most accessed with the right hand
• Integrated tape holster fits up to 35 ft tape
• Double outer bags for added organization
• Durable all-leather construction with reinforced stitching
• Made in the USA

Occidental Leather B5018DB Applications

• Daily carry of carpentry and framing hand tools
• Finish and trim work tool organization
• General construction and remodeling
• Measuring and layout tasks on site

Occidental Leather B5018DB Installation Overview

1. Slide the pouch onto your work belt.
2. Position on the right side for dominant-hand access.
3. Load tools into main and outer pockets; place tape in the holster.
4. Adjust belt for comfort and secure fit before use.

Occidental Leather 8018DBLH Features

• Left handed layout for wear on the left side
• Holders for pencils, utility knife, crayon, chisel, torpedo level, and hammer
• Tape holster fits up to a 35 ft FatMax
• Compact 3 pouch configuration with organized storage
• Lightweight OxyLights construction

Occidental Leather 8018DBLH Applications

• Daily tool organization for carpentry and framing tasks
• Measuring and layout work with quick tape access
• Punch list and trim installs requiring compact storage

Occidental Leather 8018DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Load tools into dedicated holders for secure carry.

Occidental Leather 5066LH Key Features

• Left-handed configuration; wears on right side
• All leather construction for long-term durability
• Angled body for better balance and comfort
• Two holders for drill or driver bits
• Fits most cordless drills; accepts belts up to 3 in.
• Made in the USA

Occidental Leather 5066LH Applications

• Hands-free carry of cordless drills on the jobsite
• Quick access to drill and driver bits
• Left-handed setup for carpentry, framing, and finish work

Occidental Leather 5066LH Installation Overview

1. Slide holster onto a work belt up to 3 in. wide.
2. Secure the retention strap as needed.
3. Insert cordless drill into the angled pocket.
4. Store driver bits in the integrated bit holders.

Occidental Leather 8060LH Features

• 9 pockets and tool holders for organized storage
• Industrial nylon body with leather trim for durability
• Left handed layout, worn on right side
• Dedicated holders for blade square, angle square, cat's paw, driver bits
• Made in the USA

Occidental Leather 8060LH Applications

• Framing tasks requiring quick access to fasteners and layout tools
• General carpentry tool and fastener organization
• Left handed setups worn on the right side of the belt

Occidental Leather 8060LH Installation Overview

1. Thread the bag onto a compatible work belt.
2. Position on the right side for left handed use.
3. Load fasteners and tools into the designated pockets and holders.
4. Check access and balance before starting work.

Key Features

• Round-bottom full-capacity leather bags for greater storage and durability
• NoSpill hand-specific tool holder layout
• Premium top-grain leather throughout
• 3 in heavy-duty English bridle leather belt with steel roller buckle
• 28 total pockets and tool holders
• Made in the USA

Applications

• Framing and layout work
• Trim and finish carpentry
• General carpentry and remodeling
• Jobsite tool organization and carry
• Daily professional contractor use

Installation Overview

1. Measure for proper belt size per manufacturer sizing guide.
2. Adjust the 3 in belt to a comfortable, secure fit.
3. Position tool and fastener bags on preferred sides.
4. Attach the 2-in-1 holder and Oxy Tool Shield to desired locations.
5. Load tools evenly to balance weight and check all rivets and clips are secure.

Occidental Leather 5530 XXL Key Features

• Round bottom full capacity bags for added space and durability
• NoSpill hand specific tool holder layout
• Premium top grain leather throughout
• 3 inch heavy duty English bridle leather belt with steel roller buckle
• Purpose built for framing, trim, and general carpentry
• Made in the USA

Occidental Leather 5530 XXL Applications

• Framing tasks requiring high capacity tool storage
• Trim work and finish carpentry organization
• General carpentry and remodeling
• Jobsite tool protection and quick access
• Daily professional use in demanding conditions

Occidental Leather 5530 XXL Installation Overview

1. Select correct belt size and position belt at working height.
2. Attach Big Oxy tool and fastener bags to the belt loops.
3. Clip on the Oxy Tool Shield and mount the 2 in 1 Tool and Hammer Holder.
4. Load tools into hand specific holders and adjust belt for comfort.
5. Verify secure fit and balance before use.

Occidental Leather 5530 XXXL Key Features

• Round bottom full capacity bags for added space and durability
• NoSpill hand specific tool holder system
• Premium top grain leather construction
• 3 in heavy duty work belt made of 12 oz English bridle leather with steel roller buckle
• Function engineered for framing, trim, and general carpentry

Occidental Leather 5530 XXXL Applications

• Framing and rough carpentry setups
• Trim and finish carpentry tool organization
• General construction and remodeling
• Jobsite tool carry and protection

Occidental Leather 5530 XXXL Installation Overview

1. Measure where you wear the belt to confirm size.
2. Attach the fastener and tool bags to the belt in preferred positions.
3. Clip on the 2-in-1 tool and hammer holder to the belt center or side.
4. Load tools and adjust belt for comfort and balance.
5. Check all rivets, clips, and holders before use.

Key Features

• Premium top grain leather construction for weather resistant durability
• NoSpill tool holder system keeps tools secure and accessible
• Hand specific tool placement supports natural working rhythm
• Copper rivet reinforced stress points
• Built in tape holster fits tapes up to 30 ft
• Made in USA

Applications

• Framing and rough carpentry
• General construction and remodeling
• Jobsite tool and fastener organization
• Left handed professional workflow setups

Installation Overview

1. Select the correct belt size and position bags for left hand use.
2. Thread the 5035 Ranger belt through each bag and the hammer holder.
3. Buckle and adjust to a comfortable, balanced fit.
4. Load tools and fasteners by function for efficient access.
5. Recheck fit and tighten as needed before work.

Key Features

• 20 pockets and tool holders
• Hand specific tool holder layout
• Padded two ply bags maintain shape
• Industrial nylon with leather reinforced corners and holders
• HD 3 in Ranger leather belt included
• Made in USA

Applications

• Metal stud framing and layout
• Finish carpentry tasks
• Remodeling and punch list work
• Fastener and small tool organization

Installation Overview

1. Measure your existing tool belt from buckle end to used hole to confirm XXL size.
2. Thread the 8068 and B8064 bags onto the HD Ranger belt in your preferred layout.
3. Secure the belt at the midpoint hole for optimal adjustment range.
4. Load tools and fasteners into dedicated pockets and holsters.
5. Adjust fit and balance as needed for comfort and access.

Occidental Leather 8585LH XXL Features

• FatLip leather mouth holds shape and resists wear
• Full leather boot for rugged durability
• Hand-specific tool layout for left-handed users
• Padded two-ply foam core helps bags keep form
• Industrial nylon exterior for high abrasion resistance
• 3 inch HD Ranger Belt for comfort and stability
• Includes center back 2-in-1 tool and hammer holder
• Made in USA

Occidental Leather 8585LH XXL Applications

• Framing and production carpentry
• Deck building and exterior construction
• Remodeling and general jobsite tool organization
• Finish prep and punch list tasks

Occidental Leather 8585LH XXL Installation Overview

1. Select the correct belt size and orient the left-handed layout.
2. Thread pouches onto the 3 inch Ranger belt in the preferred positions.
3. Attach the 2-in-1 holder at the center back.
4. Load tools and fasteners; adjust belt for secure fit.

Occidental Leather 5089LHLG Key Features

• Premium top grain leather construction for durability
• Seven pouch layout for high capacity organization
• NoSpill tool holder system for secure, efficient access
• Copper rivet reinforcements on main bags
• 12 oz belting leather with steel roller buckle
• Made in USA

Occidental Leather 5089LHLG Applications

• Framing and rough carpentry
• Jobsite tool and fastener carrying
• Production carpentry setups requiring maximum pouch capacity
• Left handed tradespeople needing optimized layout

Occidental Leather 5089LHLG Installation Overview

1. Measure your current tool belt per manufacturer sizing guide and select Large.
2. Adjust the HD Ranger belt to fit over typical work clothing.
3. Position the tool bag on the left and fastener bag on the right for left handed use.
4. Load tools and fasteners into dedicated pockets to balance weight.
5. Secure hammer in holder and verify comfortable reach to primary tools.

Occidental Leather 5089LH M Key Features

• Premium top-grain leather construction
• Seven-pouch framer layout; 23 pockets and tool holders
• 12 oz belting leather with steel roller buckle
• Copper-riveted reinforcement on main bags
• NoSpill tool holder system for secure layout
• Function engineered for modern framing workflows
• Made in USA

Occidental Leather 5089LH M Applications

• Framing: carry and organize nails, layout tools, and hand tools
• Carpentry: keep essential tools and fasteners accessible
• Jobsite setup: left-handed configuration for efficient workflow
• General construction tasks requiring high-capacity storage

Occidental Leather 5089LH M Installation Overview

1. Size the belt: select Medium and adjust the steel roller buckle for a secure fit.
2. Attach components: slide tool and fastener bags onto the Ranger belt; add hammer holder.
3. Configure for left-hand use: place tool bag on left, fastener bag on right.
4. Load tools and fasteners: distribute weight evenly across pouches.
5. Final check: ensure rivets, stitching, and buckle are secure before use.

Occidental Leather 8585LH SM Key Features

• FatLip leather mouth helps bags keep shape and resist wear
• Full leather boot for rugged, long term durability
• Hand specific tool layout for left handed workflows
• Padded two ply bags with abrasion resistant industrial nylon
• 3 in HD Ranger belt with center 2-in-1 tool and hammer holder
• Pockets and tool holders: 25
• Made in the USA

Occidental Leather 8585LH SM Applications

• Framing and production carpentry
• Organizing tools and fasteners on the jobsite
• Left handed tool belt setup for daily use
• General construction and remodeling tasks

Occidental Leather 8585LH SM Installation Overview

1. Thread the pouches and 2-in-1 holder onto the HD 3 in Ranger belt.
2. Configure as left handed: tool bag on left, fastener bag on right.
3. Buckle belt and adjust for a secure, comfortable fit.
4. Seat the hammer in the rear holder and load tools into dedicated pockets.
5. Verify clearance and balance before working.

Occidental Leather 8080DB XL Key Features

• 21 pockets and tool holders
• Hand-specific holder layout for efficient access
• Padded two-ply bags hold shape under load
• Industrial nylon exterior resists abrasion
• Leather tool holders and reinforced corners
• Made in USA

Occidental Leather 8080DB XL Applications

• Framing and general carpentry tool organization
• Jobsite fastener and small parts storage
• Daily wear belt for professional builders
• Hands-free access to hammers, tape, and layout tools

Occidental Leather 8080DB XL Installation Overview

1. Measure belt size from buckle to the hole you use; select XL.
2. Thread the HD Ranger Work Belt through pouches and holders.
3. Position tool and fastener bags for hand preference.
4. Attach hammer holder and load tools evenly.
5. Secure the belt; adjust for comfort and balance.

Occidental Leather 8585LH XXXL Features

• 25 pockets and tool holders
• Left hand specific tool holder layout
• Padded two ply bags maintain shape
• Industrial nylon highly resistant to abrasion
• Leather tool holders with corner reinforcement
• Made in USA

Occidental Leather 8585LH XXXL Applications

• Framing and rough carpentry tool organization
• Finish carpentry and trim installation
• General construction and remodeling tasks
• Jobsite layout and measuring tools carry
• Fastener and small parts management

Occidental Leather 8585LH XXXL Installation Overview

1. Measure an existing belt or use a tape to determine belt size; wear over typical work clothing.
2. Measure from buckle to the hole you use to confirm XXXL belt size.
3. Slide tool bags and holders onto the belt in a left handed layout.
4. Adjust spacing for comfort; secure holders and attach hammer/tool shield.
5. Load tools and fasteners; check balance and tighten belt.

Occidental Leather 8089LH XL Features

• 22 pockets and tool holders
• Hand-specific tool layout with NoSpill leather holders
• Padded two-ply bags hold their shape
• Abrasion-resistant industrial nylon with leather reinforcement
• Left-handed setup; Made in USA

Occidental Leather 8089LH XL Applications

• Framing and rough carpentry tool organization
• Jobsite fastener and hand tool carry
• Left-handed tool belt setup for carpenters
• General construction and remodeling

Occidental Leather 8089LH XL Installation Overview

1. Size the HD Ranger belt to your work clothing and secure the buckle.
2. Position fastener and tool bags on preferred sides for left-hand layout.
3. Attach the hammer holder at center rear.
4. Load tools and fasteners into hand-specific pockets.
5. Check balance and tighten belt for a secure, comfortable fit.

Occidental Leather 8585LH XL Features

• FatLip leather mouth holds shape and resists wear
• Full leather boot base with rugged nylon exterior
• Hand specific tool layout for left handed users
• Padded two ply bags maintain structure loaded or empty
• 3 inch HD Ranger belt with center back 2-in-1 holder
• 25 pockets and tool holders
• Made in USA

Occidental Leather 8585LH XL Applications

• Framing and production carpentry tool organization
• Jobsite carry for fasteners, hand tools, and layout gear
• Left handed workflow with hand specific pouch placement
• General construction where durable tool storage is needed

Occidental Leather 8585LH XL Installation Overview

1. Measure to select proper belt size and fit at mid hole.
2. Attach tool and fastener bags to the belt in left hand layout.
3. Secure the 2-in-1 holder at center back and tighten belt.
4. Load tools and fasteners; verify balance and access.
5. Inspect stitching and hardware before use.

Occidental Leather 5089LH SM Features

• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• NoSpill tool holder system
• Copper rivets reinforce main bags
• 23 pockets and tool holders
• Function engineered for modern framers
• Made in USA

Occidental Leather 5089LH SM Applications

• Framing: organize fasteners and core tools for efficient workflow
• General carpentry: carry hand tools, square, and measuring gear
• Jobsite setup: high capacity pouch system for daily tasks
• Left-handed layout: tool bag on left, fasteners on right

Occidental Leather 5089LH SM Installation Overview

1. Measure your current tool belt from buckle end to the hole used to determine size.
2. Place belt over typical work clothing and adjust to midpoint hole.
3. Attach tool and fastener bags in the left-handed configuration.
4. Load tools and fasteners into dedicated NoSpill holders.
5. Verify comfort and balance; fine tune pouch positions.

Key Features

• Left-handed configuration for optimal workflow
• Premium top-grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivet reinforcement at main bags
• NoSpill tool holder system for secure storage
• 23 pockets and tool holders for high capacity
• Made in the USA

Applications

• Framing and rough carpentry tool organization
• Jobsite fastener carrying and access
• Daily professional construction use
• Left-handed builders needing a hand-specific layout

Installation Overview

1. Measure and confirm XL belt sizing per your work clothing.
2. Slide tool and fastener bags onto the belt in left-handed layout.
3. Attach hammer holder at rear center position.
4. Buckle belt and adjust for a secure, comfortable fit.
5. Load tools and verify balanced weight distribution.

Occidental Leather 8080DBLH XXXL Key Features

• 20 pockets and tool holders
• Hand-specific tool holder layout for efficiency
• Padded two-ply nylon bags hold their shape
• Industrial nylon resists abrasion
• Leather tool holders with reinforced corners
• Made in USA

Occidental Leather 8080DBLH XXXL Applications

• Framing tasks requiring fast access to tools and fasteners
• General carpentry and jobsite setup
• Organized carry for hammers, tape, squares, and hand tools
• Left-handed workflows needing mirrored pouch placement

Occidental Leather 8080DBLH XXXL Installation Overview

1. Measure your existing tool belt from buckle end to used hole to confirm XXXL sizing.
2. Attach tool and fastener bags to the belt in left-handed orientation.
3. Secure hammer holder at rear center; adjust position for reach.
4. Load tools and fasteners; balance weight across both sides.
5. Check fit and tighten belt for comfortable, secure carry.

Occidental Leather 8089LH LG Features

• 22 pockets and tool holders
• Hand specific NoSpill leather holders for secure access
• Padded two ply tool bags hold their shape
• Extremely abrasion resistant industrial nylon construction
• Leather tool holders with leather reinforced corners
• Made in USA

Occidental Leather 8089LH LG Applications

• Framing and rough carpentry
• General carpentry tool organization on the jobsite
• Left handed tool layout for efficient workflow
• Residential and light commercial construction
• Daily use by professional builders seeking lightweight durability

Occidental Leather 8089LH LG Installation Overview

1. Measure and size the belt to your work clothing.
2. Position the fastener and tool bags for a left handed layout.
3. Secure the hammer holder and accessories on the belt.
4. Load tools and fasteners; adjust pouch positions for balance.
5. Check fit and tighten belt for a secure, comfortable carry.