Now Trending

Occidental Leather 8089LH M Features

• 22 pockets and tool holders for high-capacity carry
• Hand-specific tool layout for efficient workflow
• Padded two ply bags hold their shape
• Abrasion resistant industrial nylon with leather reinforcements
• NoSpill leather holders and OxyRed reinforced stress points
• Made in USA

Occidental Leather 8089LH M Applications

• Framing and rough carpentry tool organization
• General construction and jobsite carry
• Layout, measuring, and fastening tasks
• Left-handed workflow setups

Occidental Leather 8089LH M Installation Overview

1. Measure and select proper belt size; position over typical workwear.
2. Attach tool and fastener bags to the belt in left-handed layout.
3. Secure hammer holder and adjust pouch spacing for balance.
4. Tighten belt to a comfortable fit; verify free access to tools.
5. Load tools and perform a final comfort and security check.

Occidental Leather 8585 XXL Key Features

• 25 pockets and tool holders for organized storage
• Hand-specific layout increases efficiency
• Padded two-ply bags maintain shape under load
• Industrial-strength nylon with leather reinforcements
• Full leather boot and FatLip mouth for durability
• Made in USA

Occidental Leather 8585 XXL Applications

• Framing and production carpentry
• General construction and remodeling
• Jobsite tool and fastener organization
• Heavy-duty daily use in demanding environments

Occidental Leather 8585 XXL Installation Overview

1. Measure an existing belt from buckle end to your most-used hole to confirm size.
2. Wear the belt over typical work clothing and position pouches as preferred.
3. Secure the buckle using the hole that provides a snug, comfortable fit.
4. Attach the hammer holder and adjust bag spacing for reach and balance.
5. Verify all pouches are seated and the set rides level before use.

Occidental Leather 8089LH XXL Key Features

• 22 pockets and tool holders
• Hand specific tool layout with NoSpill leather holders
• Padded two ply bags maintain shape
• Industrial nylon with leather reinforcements
• Made in USA

Occidental Leather 8089LH XXL Applications

• Framing and general carpentry tool carry
• Fastener and small part organization on the jobsite
• Left handed workflow optimization
• Daily professional construction use

Occidental Leather 8089LH XXL Installation Overview

1. Size the belt to your work clothing and buckle at the midpoint hole.
2. Attach tool and fastener bags in the left handed layout.
3. Secure the hammer holder and any clip on accessories.
4. Load tools and fasteners into designated pockets.
5. Adjust fit for comfort and balance before use.

Occidental Leather 8585LH LG Key Features

• 25 pockets and tool holders
• Hand specific tool holder layout for left handed users
• Padded two ply bags hold shape
• Industrial nylon with leather reinforcements for abrasion resistance
• Full leather boot and FatLip leather mouth
• Made in USA

Occidental Leather 8585LH LG Applications

• Framing and general carpentry
• Production carpentry tool organization
• Fastener and small tool storage on the jobsite
• Left handed belt system setups

Occidental Leather 8585LH LG Installation Overview

1. Measure an existing belt from buckle to the hole used to determine belt size.
2. Wear the belt over normal work clothing and confirm fit.
3. Attach tool bags and holders to the belt in a left handed layout.
4. Distribute tools and fasteners and adjust for comfort and balance.
5. Check all rivets and loops before use.

Occidental Leather B5135 M Key Features

• Wide 5 in. belt for added lower back support
• Suspender attachment loops
• Thick padded interior for comfort and moisture wicking
• 2 in. leather overbelt plus heavy duty buckles and belt loops minimize bag sliding
• Handcrafted in the USA from premium Latigo leather

Occidental Leather B5135 M Applications

• Support and stabilize tool bags and pouches on the job
• Use with suspenders for added load distribution
• Daily wear for construction, carpentry, electrical, and trades
• Upgrading comfort on existing Occidental Leather systems

Occidental Leather B5135 M Installation Overview

1. Measure an existing work belt or measure from buckle to the hole you use to confirm size.
2. Thread tool bags onto the 2 in. overbelt as desired.
3. Position the belt at working height and buckle to a comfortable hole.
4. Attach suspenders to the loops if used and adjust for balance.
5. Reposition bags so weight is centered and movement is minimized.

Occidental Leather 5135 M Key Features

• Wide 5 in belt for enhanced back support
• Built in suspender attachment loops
• Thick padded wool liner for comfort and moisture control
• Heavy duty buckles and belt loops reduce bag sliding
• Edge stitched leather for added strength
• Made in USA

Occidental Leather 5135 M Applications

• Securely carry tool bags and pouches on the job
• Provide back support during long workdays
• Use with suspenders for balanced load distribution
• Suitable for carpentry, framing, and general trades
• Comfortable wear in warm or active conditions

Occidental Leather 5135 M Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole to find belt size.
2. Select Medium if your measurement is near 37 in midpoint.
3. Wear over standard work clothing and tighten using the preferred hole.
4. Attach tool bags to the overbelt and loops; add suspenders if needed.
5. Confirm comfortable fit and adjust within the available holes.

Occidental Leather B5135 XXL Key Features

• 5 inch wide belt for enhanced back support
• Padded wool liner for comfort and moisture control
• 2 inch all leather overbelt keeps tool bags in place
• Nickel plated steel buckles and hardware
• Built in suspender attachment loops
• Edge stitched for durability and clean appearance
• Made in the USA

Occidental Leather B5135 XXL Applications

• Daily tool carry with improved back support
• Securing Occidental tool bags with minimal sliding
• Use with suspenders for balanced load distribution
• Carpentry, framing, and general construction work
• Comfort focused belt upgrade for heavy rigs

Occidental Leather B5135 XXL Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove and measure from the end of the buckle to the used hole.
3. Select the size closest to that measurement; this model is XX Large.
4. Attach tool bags to the overbelt loops; tighten to minimize sliding.
5. Connect compatible suspenders to the attachment loops if desired.

Occidental Leather B8552 Features

• 2 in. steel belt clip for quick on/off attachment
• Drawstring closure to secure small parts and fasteners
• Dual-layer nylon build: 1000D sides, 1050D bottom for wear resistance
• Clips to most belts or waistbands up to 2 in. wide
• Made in the USA

Occidental Leather B8552 Applications

• Carrying nails, screws, and small fasteners
• Storing bits, anchors, and small hand tools
• Clip-on parts pouch for framing, trim, and service work
• Supplemental storage on belts, waistbands, or vests

Occidental Leather B8552 Installation Overview

1. Attach the steel clip to a belt or waistband up to 2 in. wide.
2. Load fasteners or small tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Position for comfortable reach and confirm the clip is fully seated.

Occidental Leather 8554 Key Features

• Tall size for increased capacity
• 2 inch belt clip for fast on off
• Drawstring top secures contents
• Dual layer 1000D nylon sides with 1050D nylon bottom
• Proudly made in the USA

Occidental Leather 8554 Applications

• Carry shims, fasteners, and small parts
• Quick access storage on tool belts
• Supplemental pouch for carpenters and installers
• Organize small hand tools and markers

Occidental Leather 8554 Installation Overview

1. Clip pouch onto belt using the 2 inch belt clip.
2. Load tools or supplies into the pouch.
3. Cinch the drawstring to secure contents.
4. Position for comfortable reach and adjust as needed.

Occidental Leather B8551 Features

• 2-inch belt clip for quick attachment and removal
• Drawstring top keeps fasteners and small tools secure
• Dual-layer 1000D nylon sides with 1050D nylon bottom
• Small size: 5 in diameter x 6 in high; color: black
• Proudly made in the USA

Occidental Leather B8551 Applications

• Carry nails, screws, and small fasteners
• Store small hand tools and accessories
• Quick-grab pouch for trim and finish tasks
• Add-on storage for tool belts and work vests

Occidental Leather B8551 Installation Overview

1. Slide or clip the pouch onto a work belt using the 2-inch belt clip.
2. Load fasteners or small tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Adjust pouch position for comfortable reach.