Now Trending

Occidental Leather 5570 Features

• Full grain leather construction for durability
• Dedicated holders for circle cutter, metal snips, saw, knife, Surform, Oxy tool shield, C-clamps, pencils, and hammer
• Designed for right hand use
• Optimized for drywall professionals
• Keeps all essential tools within easy reach
• Made in the USA

Occidental Leather 9515LH Key Features

• Fully adjustable for 32 in to 41 in pant waists; ideal for seasonal clothing changes
• D-rings pre-installed for use with suspension systems
• Hand-specific, left-handed layout promotes efficient workflow
• Padded two-ply bags keep their shape
• Extremely abrasion-resistant industrial nylon with leather corner reinforcement
• Removable High Mount Hammer Holder 5059 on rear
• Made in USA

Occidental Leather 9515LH Applications

• Framing and rough carpentry setups
• General construction and remodeling tool carry
• Jobsite organization for left-handed pros
• Use with suspenders via integrated D-rings

Occidental Leather 9515LH Installation Overview

1. Adjust belt to fit 32 in to 41 in pant size using the buckle and crossover system.
2. Position bags and hammer holder to preferred left-handed layout.
3. Secure D-rings to suspenders if desired.
4. Load tools and fasteners; verify bags are balanced and secure.

Occidental Leather 5018DBLH Key Features

• Double outer bag design for organized storage
• Holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Integrated tape holster fits tapes up to 35 ft
• Left handed layout worn on the left side
• Premium leather construction

Occidental Leather 5018DBLH Applications

• Daily carry of hand tools on the jobsite
• Framing and carpentry tool organization
• Finish work where quick access to small tools is needed
• Measuring and marking with onboard tape and pencil holders

Occidental Leather 5018DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Secure the tape measure in the holster.
4. Load essential tools into designated pockets and holders.
5. Confirm balanced weight and comfortable reach before use.

Occidental Leather B5068 Features

• All-leather construction for long-term durability
• Snap closure secures calculator and allows quick access
• Fits up to a 3 inch work belt
• Compatible with Construction Master models I, II, III, IV and other brands
• Also available as clip-on model B6568

Occidental Leather B5068 Applications

• Jobsite calculator protection and portability
• Belt-mounted storage for quick measurement access
• Secure carry while walking, climbing, or working

Occidental Leather B5068 Installation Overview

1. Slide the case onto a belt up to 3 inches wide.
2. Insert the calculator into the pouch.
3. Close the snap to secure and check fit.

Occidental Leather B8018DB Key Features

• Most popular OxyLights tool bag
• Integrated tape holder fits up to 35 ft FatMax
• Tool-specific holders plus hammer loop for fast access
• Right-side orientation; not offered in left-hand model
• Durable leather and nylon construction

Occidental Leather B8018DB Applications

• Everyday carry of layout and cutting tools
• Framing and finish tasks requiring fast access to hand tools
• Jobsite organization with right-hand dominant layouts
• Tape, level, and marking tool storage on belt systems

Occidental Leather B8018DB Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into the dedicated holders and main pockets.
4. Place a tape measure in the leather holder; verify secure fit.
5. Check balance and adjust belt for comfortable carry.

Occidental Leather 5062LH Key Features

• Left-handed layout worn on the right side
• Same features as 5060LH plus an additional outer pouch
• Holders for blade square, angle square, driver bits, and cat's paw
• 10 total pockets and tool holders
• Full-grain leather construction for durability
• Made in the USA

Occidental Leather 5062LH Applications

• Framing and rough carpentry fastener carry
• General carpentry tool and hardware organization
• Layout tasks requiring blade and angle squares
• Daily jobsite use where quick access to bits and small tools is needed

Occidental Leather 5062LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side of the body for left-handed use.
3. Load fasteners and tools into the four stacked compartments.
4. Use dedicated holders for squares, bits, and cat's paw.
5. Adjust placement for comfort and balanced carry.

Occidental Leather 9520LH Features

• Compact, lightweight bag ideal for trim, framing and finish work
• Round-bottom nylon main and outer bags for durability and easy access
• Speed square holder usable inside or outside
• Patented 2-in-1 outer bag increases fastener capacity
• Left-handed layout worn on right side for right-hand access
• Includes 2003 Oxy Tool Shield for sharp tool protection

Occidental Leather 9520LH Applications

• Trim carpentry organization and fastener access
• Framing tasks requiring quick tool retrieval
• Finish work where compact storage is preferred
• Left-handed setups worn on right side

Occidental Leather 9520LH Installation Overview

1. Attach bag securely to your work belt.
2. Position on the right side for left-handed layout.
3. Load fasteners and tools into main and 2-in-1 outer bag.
4. Place speed square in the designated holder (inside or outside).
5. Store sharp tools in the included Oxy Tool Shield.

Occidental Leather B5060LH Key Features

• Left-handed layout worn on the right side for quick access
• Three stacked pouches with top-access tier
• 9 pockets and tool holders for common layout tools
• Premium leather construction for long-term durability
• Made in the USA

Occidental Leather B5060LH Applications

• Framing and rough carpentry fastener storage
• General carpentry and remodel tasks
• Organizing layout squares, bits, and small tools

Occidental Leather B5060LH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side to suit left-handed setups.
3. Load fasteners and layout tools into the designated pockets.
4. Check balance and adjust position for comfort.

Occidental Leather B5080DBLHLG Key Features

• Premium top grain leather construction for work-ready durability
• Left-handed, hand-specific layout supports natural workflow
• NoSpill tool holder system keeps tools secure yet accessible
• Copper-riveted stress points for extended service life
• Built-in tape holster fits tapes up to 30 ft
• 22 total pockets and tool holders
• Made in the USA

Occidental Leather B5080DBLHLG Applications

• Framing carpentry where fast access to tools and fasteners is essential
• General carpentry tasks in demanding outdoor jobsite conditions
• Organizing and carrying hand tools, fasteners, and layout accessories
• Professional builder setups requiring a left-handed tool layout

Occidental Leather B5080DBLHLG Installation Overview

1. Measure your current tool belt from the buckle end to the hole you use to confirm Large sizing per the size guide.
2. Position the left-handed layout: Tool Bag on left side, Fastener Bag on right side.
3. Adjust the 3 in. Ranger belt to the midpoint hole for a secure fit over work clothing.
4. Load tools and fasteners into the intended holders; seat tape in the built-in holster.
5. Walk and work briefly; re-adjust belt tension and bag placement for comfort.

Key Features

• 20 pockets and tool holders
• Hand specific tool organization
• Padded two ply bags hold their shape under load
• Industrial nylon with leather tool holders and corner reinforcement
• Right side gun holster for impact or screw guns
• Made in USA

Applications

• Metal stud framing and fastening
• Finish carpentry and trim installation
• Remodeling and punch list tasks
• General layout and fastening work

Installation Overview

1. Measure and select the correct belt size for over garment wear.
2. Thread the work belt through the bags and holders in preferred positions.
3. Secure the hammer holder and accessories to the belt.
4. Adjust the belt for a snug, balanced fit at the midpoint hole.
5. Load tools and fasteners; verify balanced weight and accessibility.

Occidental Leather 8087 M Key Features

• 20 pockets and tool holders
• Hand-specific tool organization
• Padded two-ply bags maintain structure
• Abrasion-resistant industrial nylon with leather reinforcement
• Made in USA

Occidental Leather 8087 M Applications

• Metal framing and stud work
• Finish carpentry tasks
• Remodeling and general construction
• Organizing fasteners, layout tools, and clamps
• Holstering impact drivers or screw guns

Occidental Leather 8087 M Installation Overview

1. Measure and select the correct belt size; fasten at midpoint hole.
2. Attach included bags and holders to the 3" Ranger belt.
3. Adjust belt fit for comfort and balance.
4. Load tools and fasteners; place driver in the gun holster.
5. Verify secure attachment points and even weight distribution.

Occidental Leather 8080DB M Key Features

• 21 pockets and tool holders for organized carry
• Hand specific tool holder layout for efficiency
• Padded two ply nylon bags hold shape
• Industrial abrasion resistant nylon
• Leather tool holders with corner reinforcement
• Made in USA

Occidental Leather 8080DB M Applications

• Framing and general carpentry tool organization
• On site fastener and tool access for construction
• Deck building and exterior trim projects
• Remodeling tasks requiring multi tool carry

Occidental Leather 8080DB M Installation Overview

1. Select Medium size; thread belt through both bags and hammer holder.
2. Position tool bag on your dominant hand side; fastener bag opposite.
3. Buckle belt and adjust fit using belt holes for comfortable support.
4. Load tools and fasteners into dedicated pockets and holders.
5. Verify balance and accessibility; re adjust as needed.

Occidental Leather 8080DBLH XXL Key Features

• 20 pockets and tool holders
• Hand-specific leather tool holders for efficient workflow
• Padded two-ply nylon bags maintain shape
• Industrial nylon with leather corner reinforcement for abrasion resistance
• Made in USA

Occidental Leather 8080DBLH XXL Applications

• Framing and general carpentry tool organization
• Jobsite fastener and tool carrying
• Left-handed workflows requiring hand-specific layout

Occidental Leather 8080DBLH XXL Installation Overview

1. Measure and select the correct XXL belt size.
2. Slide tool and fastener bags onto the Ranger belt.
3. Attach the hammer holder at the rear center slot.
4. Adjust belt to preferred hole and secure fit over work clothing.
5. Load tools and fasteners; verify balanced, left-handed layout.

Occidental Leather 8585 XXXL Key Features

• 25 pockets and tool holders for organized storage
• Hand-specific tool holder layout
• Padded two-ply bags maintain structure
• Industrial nylon for high abrasion resistance
• Leather tool holders with reinforced corners
• Full leather boot and FatLip bag mouth
• Made in USA

Occidental Leather 8585 XXXL Applications

• Production carpentry and framing
• General construction tool organization
• Remodeling and installation tasks
• Finish and trim carpentry
• Jobsite tool carry with quick access

Occidental Leather 8585 XXXL Installation Overview

1. Measure from belt buckle to the hole you use to determine belt size.
2. Wear over normal work clothes and select the best buckle hole.
3. Attach tool and fastener bags to preferred sides.
4. Secure the 2-in-1 holder at the rear for hammer or specialty tools.
5. Load tools and adjust for comfort and balance.

Occidental Leather B5135 LG Key Features

• 5 in wide belt provides added back support
• Suspender attachment loops for optional load distribution
• Thick padded, moisture wicking interior for comfort
• Heavy duty buckles and belt loops minimize bag sliding
• 2 in all leather overbelt keeps pouches stable
• Nickel plated steel hardware; edge stitched for strength
• Handcrafted in the USA

Occidental Leather B5135 LG Applications

• Carrying and stabilizing tool pouches on the jobsite
• Reducing lower back strain during all day wear
• Use with suspenders for added weight distribution
• General construction, carpentry, electrical, and finish work

Occidental Leather B5135 LG Installation Overview

1. Select correct size; position belt around waist over work pants.
2. Thread tool bags onto the overbelt and place in desired positions.
3. Buckle the belt and tighten to a comfortable, secure fit.
4. Attach suspenders to the loops if using for extra support.
5. Recheck fit and adjust pouch spacing as needed.

Occidental Leather 5135 XL Key Features

• Wide 5 in belt enhances back support
• Suspender attachment loops pre-installed
• Thick padded interior for comfort and moisture control
• Heavy duty buckles and belt loops minimize bag sliding
• Edge stitched leather construction
• Made in USA

Occidental Leather 5135 XL Applications

• Supporting tool bags for carpentry and construction
• Improving lower back support during long work days
• Use with suspenders for added load distribution
• Jobsite wear requiring durable leather work belts

Occidental Leather 5135 XL Installation Overview

1. Measure an existing tool belt from buckle end to the most used hole.
2. Select the size closest to that mid-range measurement.
3. Put the belt on over normal work clothes and adjust to comfort.
4. Attach suspenders to the built-in loops if desired.
5. Secure tool bags to the overbelt and verify they do not slide.

Occidental Leather B5135 SM Key Features

• 5 in wide belt for enhanced back support
• Padded wool liner for moisture-wicking comfort
• 2 in all-leather overbelt helps prevent bag sliding
• Nickel-plated steel buckles and hardware
• Integrated suspender attachment loops
• Edge-stitched Latigo leather for strength and clean finish
• Handcrafted in the USA

Occidental Leather B5135 SM Applications

• Securely carry and stabilize tool bags and pouches
• Back support for all-day wear on construction sites
• Use with suspenders for balanced load distribution
• General carpentry, framing, remodeling, and trades work

Occidental Leather B5135 SM Installation Overview

1. Measure your existing tool belt from buckle end to the hole you use to confirm size.
2. Position the Stronghold belt where you wear your rig and buckle to the midpoint hole.
3. Slide tool bags onto the 2 in overbelt and secure in desired positions.
4. Attach compatible suspenders to the built-in loops if needed.
5. Fine-tune fit for comfort and even weight distribution.

Occidental Leather 8583LH Features

• 10 inch deep main bag with full leather boot
• Leather FatLip mouth keeps bag formed, open, and abrasion resistant
• Patented 2 in 1 outer bag with built in angle square holster
• Tri square sleeve, cats paw loop, and external pouches for nail sets or driver bits
• Left handed layout worn on the right side
• Made in USA

Occidental Leather 8583LH Applications

• Framing and carpentry fastener organization
• Drywall installation tool and bit storage
• General construction fastener and small tool management

Occidental Leather 8583LH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side for left handed use.
3. Load fasteners and tools into designated pockets.
4. Confirm the FatLip mouth and compartments are clear for access.

Occidental Leather B8554 Features

• 2 inch belt clip for quick attachment and removal
• Drawstring closure helps retain contents
• Durable build with dual layer 1000D nylon sides and 1050D nylon bottom
• Tall size: 5 in diameter x 8.5 in high
• Made in the USA

Occidental Leather B8554 Applications

• Holding fasteners, shims, and small hand tools
• Clip on storage for belts and vests
• Jobsite organization and quick access

Occidental Leather B8554 Installation Overview

1. Slide or clip the 2 inch belt clip onto your belt or strap.
2. Load tools or fasteners into the pouch.
3. Cinch the drawstring to secure contents.
4. Release clip to reposition or remove as needed.

Occidental Leather 5808 M Features

• 9–10 oz Latigo leather
• Edge-stitched finish
• 1.5 inch width fits standard belt loops
• Solid stainless steel roller buckle
• Sizes SM–XL
• Made in USA

Occidental Leather 5808 SM Features

• 9–10 oz Latigo leather
• Edge-stitched finish
• 1.5 inch width fits standard belt loops
• Solid stainless steel roller buckle
• Sizes SM–XL
• Made in USA

Occidental Leather B5625 SM Key Features

• Premium top-grain leather construction
• Side-by-side upper bag and tape mount for quick access
• Hand-specific tool holders for efficient workflow
• NoSpill holder system helps keep tools secure
• Reinforced back walls at stress points for durability
• Made in the USA

Occidental Leather B5625 SM Applications

• Framing and rough carpentry
• General construction and remodeling
• Jobsite tool and fastener organization
• Daily professional use in demanding conditions

Occidental Leather B5625 SM Installation Overview

1. Measure your current tool belt at the hole you use to fasten it.
2. Match the measurement to the size chart; size up if between sizes.
3. Load tools into hand-specific pockets and adjust belt to midpoint hole.
4. Attach hammer holder and Oxy Tool Shields as preferred.
5. Confirm comfort and balance; fine-tune position of bags on the belt.

Occidental Leather G9019 Key Features

• Compact single-compartment layout for quick access
• Padded, double-wall nylon adds structure and durability
• Lightweight design for comfortable all-day wear
• Great as a third bag or for small jobs
• Made in the USA

Occidental Leather G9019 Applications

• Extra storage on a tool belt for fasteners or small parts
• Light-duty service and punch-list tasks
• Add-on third bag for flexible belt setups
• General utility carrying on the jobsite

Occidental Leather G9019 Installation Overview

1. Slide the bag onto your work belt through the rear loop.
2. Position at the preferred location for access and balance.
3. Load with small tools or fasteners and confirm a secure fit.

Occidental Leather 8585 SM Features

• 25 pockets and tool holders
• Hand specific tool organization
• Padded two ply bags maintain shape
• Industrial nylon with leather reinforcements for durability
• Full leather boot and FatLip leather mouth for abrasion resistance
• Made in USA

Occidental Leather 8585 SM Applications

• General carpentry and framing tasks
• Layout, measuring, and fastening workflows
• Trim and finish punch lists
• Jobsite tool and fastener organization

Occidental Leather 8585 SM Installation Overview

1. Select the correct belt size and thread the tongue through the buckle.
2. Position tool and fastener bags on each side for hand preference.
3. Attach the 2-in-1 holder and any accessories to desired locations.
4. Load tools evenly and adjust belt for a snug, comfortable fit.
5. Verify pouches are secure before use.