Now Trending

Occidental Leather 6104 Key Features

• Streamlined 2-pouch utility design
• No tool holders inside or outside for simple storage
• Durable leather construction
• Lightweight and compact for belt setups
• Made in the USA

Occidental Leather 6104 Applications

• Storing fasteners and small hardware
• Carrying loose hand tools
• Expanding capacity on a tool belt
• Organizing overflow items on the jobsite

Occidental Leather 6104 Installation Overview

1. Thread the bag onto a compatible work belt.
2. Position for preferred access on your belt setup.
3. Load fasteners or small tools into main and outer pouches.
4. Check balance and adjust placement as needed.

Occidental Leather 5156 Key Features

• Steel cradle style holder for secure hammer carry
• 2 in. belt slot sized for narrow belts
• Steel hardware riveted to extra heavy leather back
• Compatible with 2 in. Leather Work Belt 5002 and Stronghold Beltless rear strap
• Made in the USA

Occidental Leather 5156 Applications

• Secure hammer carry on 2 in. belts
• Framing and carpentry belt setups
• Use with beltless suspenda style rear straps
• General construction and remodeling

Occidental Leather 5156 Installation Overview

1. Thread a 2 in. belt through the two vertical slots.
2. Position holder at desired location on the belt or rear strap.
3. Tighten belt and ensure the holder sits flat against your side.
4. Insert hammer into steel cradle and check for secure fit.

Occidental Leather 5068 Key Features

• All-leather construction with reinforced stitching
• Snap closure keeps contents secure
• Belt-worn design fits 1 to 3 inch wide belts
• Compatible with Construction Master I–IV and other calculators
• Made in USA

Occidental Leather 5068 Applications

• Protecting calculators on the jobsite
• Hands-free belt carry for quick access
• Holding similarly sized devices or phones

Occidental Leather 5068 Installation Overview

1. Slide the belt loop over a 1 to 3 inch wide work belt.
2. Insert the calculator into the pouch.
3. Close the snap to secure the contents.
4. Position on belt for comfortable access.

Occidental Leather 6101 Features

• Trim-ready compact leather design for finish work
• Tool-specific holders for nail sets, blade square, and cat's paw
• Streamlined layout reduces bulk and keeps tools organized
• No angle square holster
• Made in USA
• Left-hand version available as 6101LH

Occidental Leather 6101 Applications

• Trim and finish carpentry
• Light framing tasks
• Interior remodel and punch list work
• Organizing fasteners and layout tools on the left side

Occidental Leather 6101 Installation Overview

1. Attach the bag securely to your work belt.
2. Load fasteners and layout tools into dedicated pockets.
3. Wear on the left side for easy left-hand access.

Occidental Leather 9085 Features

• Purpose-built tool organization in a compact case
• 18 pockets and tool holders for screwdrivers, chisels, bits, and more
• Leather-lined bottom enhances durability and shape retention
• Four rigid interior walls keep tools upright
• Includes 2 Oxy Tool Shields for sharp tool protection
• Made in the USA

Occidental Leather 9085 Applications

• Finish carpentry tool organization
• Plant engineering and maintenance kits
• On-the-go tool access for service professionals
• Upright storage for hand tools and accessories

Occidental Leather 9085 Installation Overview

1. Load tools into dedicated pockets and holders.
2. Place sharp tools in the included Oxy Tool Shields.
3. Attach the case securely to your work belt.
4. Arrange tools upright using interior dividers for quick access.

Occidental Leather 5085 Key Features

• 17 pockets and holders for organized storage inside and out
• Divided interior for separated, easy-to-reach tool access
• Quick-release snap and strap for electrical tape
• Holster fits a 35 ft x 1 in tape measure
• Constructed from 8 oz top grain leather; Made in USA
• Tunnel loop fits up to a 3 in work belt

Occidental Leather 5085 Applications

• Organizing hand tools for jobsite or shop use
• Carrying screwdrivers, pliers, knives, chisels, markers, and strippers
• Holding torpedo level, hammer, and tape measure
• Attaching to belts up to 3 in for hands-free access

Occidental Leather 5085 Installation Overview

1. Thread a work belt (up to 3 in wide) through the tunnel loop.
2. Position the case at preferred location on your belt.
3. Load tools into divided pockets for balanced weight.
4. Secure tape to the strap and attach items to the quick-release snap as needed.
5. Verify pockets and snap are closed before use.

Occidental Leather 9855LH Features

• Adjust-to-Fit belt for pant waist 32 in to 41 in
• D rings pre installed for suspenders
• FatLip bag design with structured mouth
• Hand specific tool holders for improved rhythm
• Rear 2 in 1 tool and hammer holder; includes Oxy Tool Shield
• Made in USA

Occidental Leather 9855LH Applications

• Production carpentry tool carry and organization
• Framing and layout work
• General jobsite fastening and measuring tasks
• Use with suspension systems for extended wear

Occidental Leather 9855LH Installation Overview

1. Measure and adjust belt to fit within 32 in to 41 in range.
2. Position tool and fastener bags for left handed layout.
3. Attach hammer holder and accessories to belt loops.
4. Load tools and fasteners; confirm balanced carry.
5. Optionally connect suspenders to pre installed D rings.

Occidental Leather 5013 Key Features

• Holds most pliers and side cutters
• Ideal for Felco and other pruning shears
• Durable leather construction with closed bottom
• Fits belts up to 3 in. wide
• Made in USA

Occidental Leather 5013 Applications

• Carry pruning shears for landscaping and gardening
• Keep pliers or side cutters accessible on the jobsite
• Organize everyday tools on a work belt

Occidental Leather 5013 Installation Overview

1. Slide the holster onto a belt up to 3 in. wide.
2. Seat the tool fully into the pocket.
3. Confirm the holster sits securely and does not obstruct movement.

Occidental Leather B8080DBSM Key Features

• Hand-specific tool holder layout for efficient workflow
• Double-wall padded nylon bags maintain structure
• Abrasion-resistant industrial nylon construction
• 12 oz belting leather belt with steel roller buckle
• Leather-reinforced corners and tool holders

Occidental Leather B8080DBSM Applications

• Framing and rough carpentry
• General construction tool carry
• Jobsite fastener and tool organization

Occidental Leather B8080DBSM Installation Overview

1. Measure belt fit from buckle end to your most used hole to confirm size.
2. Attach both outer bags to the belt in your preferred handed layout.
3. Secure the hammer holder at rear center and tighten belt at midpoint hole.
4. Load tools and fasteners; adjust pouch positions for balance and access.
5. Verify all rivets, snaps, and holders are seated before use.

Occidental Leather 8080DBLHLG Key Features

• Left handed layout with hand specific tool holders
• Padded two ply tool bags hold their shape
• Industrial nylon body provides high abrasion resistance
• Leather tool holders with OxyRed reinforced corners
• Lighter weight alternative to full leather framer sets

Occidental Leather 8080DBLHLG Applications

• Framing and rough carpentry tasks
• General construction and remodeling
• Jobsite tool organization and carry
• Left handed users needing a dedicated layout

Occidental Leather 8080DBLHLG Installation Overview

1. Measure an existing belt from buckle to the most used hole to determine size.
2. Select the Large belt if your measurement falls in its mid range.
3. Position the belt over work clothing and adjust for a snug fit.
4. Arrange the left handed bags and hammer holder on the belt as preferred.
5. Load tools into the hand specific holders to verify balance and access.

Occidental Leather B5055 Features

• Even load distribution to relieve hip and lower back strain
• Padded, contoured yoke with sweat-wicking lining
• Secure fit keeps straps from wandering off shoulders
• Tool-friendly chest pockets on both sides
• Heavy-duty center D ring for hanging your rig
• Leather loop attachment system fits up to a 3 in. belt
• Made in USA

Occidental Leather B5055 Applications

• Support and stabilize heavy tool belts during daily use
• Reduce lower back and hip fatigue on framing and carpentry jobs
• Keep rigs balanced when carrying bulky tools and fasteners
• Quickly hang up complete belt systems between tasks

Occidental Leather B5055 Installation Overview

1. Attach leather loops to your tool belt (up to 3 in. width).
2. Connect front clips and set the chest strap to a comfortable tension.
3. Adjust strap lengths for even weight distribution.
4. Check shoulder yoke alignment and secure fit before use.
5. Use the center D ring to hang the rig when removing.

Occidental Leather 6530 Features

• Designed for standard 2.5 in round chew or dip cans
• 2 in proprietary steel belt clip; fits belts or waistbands up to 2 in wide
• Full-grain leather construction in classic OxBlood red
• Embossed Occidental Leather logo
• Made in USA

Occidental Leather 6530 Applications

• Jobsite carry for chew or dip cans
• Framing, welding, and general trades work
• Everyday belt or waistband accessory
• Walking the site while keeping hands free

Occidental Leather 6530 Installation Overview

1. Slide the steel clip onto a belt or waistband up to 2 in wide.
2. Insert the 2.5 in can into the leather holster.
3. Check retention and adjust holster position for easy access.
4. Remove the holster by lifting the clip and sliding off the belt.

Occidental Leather B5080DBLH M Key Features

• Premium top grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand specific tool layout for efficient workflow
• Copper rivets reinforce stress points
• Function driven design for professional framers

Occidental Leather B5080DBLH M Applications

• Framing and rough carpentry
• General jobsite tool and fastener carry
• Remodeling and construction tasks
• Layout work with tape and square holsters
• Left handed workflow setups

Occidental Leather B5080DBLH M Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to determine belt size.
2. Select Medium if your midpoint measurement is about 37 in.
3. Attach tool and fastener bags to the belt with tool bag on the left and fastener bag on the right for left handed use.
4. Secure hammer holder and adjust belt to a comfortable fit.
5. Load tools and verify access and balance.

Occidental Leather 5191XL Key Features

• Unique one-piece tool belt assembly for balanced load distribution
• Premium top-grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper-riveted main bags for durability
• NoSpill tool holder system keeps tools secure
• Sheepskin-lined interior for comfort
• Made in USA
• Not available as left-hand model; suggested 9550LH

Occidental Leather 5191XL Applications

• Framing and general carpentry
• Remodeling and residential construction
• Jobsite tool organization and carry
• Finish carpentry tool layout

Occidental Leather 5191XL Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove the belt and measure from the buckle end to that hole to confirm size.
3. Adjust fit using midpoint hole; 4 inches of adjustment each way.
4. Load tools into hand-specific holders; secure sharp tools in dedicated holsters.
5. Verify balanced weight before use.

Occidental Leather 5237 Key Features

• High-mount, clip-on design installs without removing your belt
• Sized to fit 35 ft FatMax tape measures
• Proprietary steel belt clip fits belts up to 2 inches wide
• Heirloom-quality leather for long-lasting durability
• Made in USA

Occidental Leather 5237 Applications

• Secure belt carry for 35 ft tape measures on the jobsite
• Fast access measuring for framing, trim, and general carpentry
• Upgrade or replacement holster for tool belts and work pants

Occidental Leather 5237 Installation Overview

1. Slide or clip the steel clip over your belt (up to 2 inches wide).
2. Position the holster high on the belt for reduced swing.
3. Insert the tape measure into the pouch opening until fully seated.
4. Check retention and adjust holster position for comfort.
5. Remove by lifting the clip tab and sliding off the belt.

Occidental Leather 8551 Features

• 2 inch steel clip enables fast on and off attachment
• Drawstring closure secures fasteners and small tools
• Dual layer 1000D sides and 1050D bottom for wear resistance
• Clips to most belts or waistbands up to 2 inches wide
• Made in the USA

Occidental Leather 8551 Applications

• Carry nails, screws, and small parts on the job
• Quick access storage for trim shims and wedges
• Add on pouch for tool belts and work vests
• Lightweight parts holder for service and install work

Occidental Leather 8551 Installation Overview

1. Slide or clip the pouch onto a belt or waistband up to 2 inches wide.
2. Load with fasteners or small tools.
3. Pull the drawstring to secure contents as needed.
4. Release the clip to remove when finished.

Occidental Leather 5135 XXL Key Features

• 5 in. wide belt for enhanced back support
• Built-in suspender attachment loops
• Thick padded wool liner for comfort and moisture control
• Heavy duty buckles and belt loops minimize bag sliding
• Edge stitched leather for added strength

Occidental Leather 5135 XXL Applications

• Securely carry tool bags and pouches
• Provide back support during long workdays
• Use with suspenders for balanced load distribution
• Carpentry, framing, and general construction tasks
• Comfortable wear over layered work clothing

Occidental Leather 5135 XXL Installation Overview

1. Measure your current tool belt from buckle end to the hole you use.
2. Select size based on midpoint measurement; size up if between.
3. Wear over typical work clothing and fasten at the midpoint hole.
4. Attach tool bags to the overbelt loops; tighten to prevent sliding.
5. Clip suspenders to built-in loops for added support if needed.

Occidental Leather 8089LH SM Key Features

• 22 pockets and tool holders for high capacity
• Hand specific, NoSpill leather tool holders
• Padded two ply bags maintain structure
• Industrial nylon with leather reinforcements for long wear
• Left handed layout; Made in USA

Applications

• Framing and rough carpentry
• Jobsite fastener and tool organization
• General construction and remodeling
• Left handed belt rig setup

Installation Overview

1. Measure and select the correct belt size for over garment wear.
2. Position fastener and tool bags on the left handed layout.
3. Load tools and fasteners; balance weight across the belt.
4. Secure the buckle and adjust for a snug, comfortable fit.
5. Verify hammer holder and tape position for easy access.

Occidental Leather 8585LHM Key Features

• Left-handed layout
• Leather FatLip bag mouth for structure and abrasion resistance
• Full leather boot with 10 in deep industrial nylon bags
• Hand-specific tool holders and padded two ply construction
• 25 pockets and holders; Made in USA

Occidental Leather 8585LHM Applications

• Framing and rough carpentry
• General construction and remodeling
• Finish and trim tasks requiring organized fasteners and tools
• Jobsite setups needing left-handed tool access

Occidental Leather 8585LHM Installation Overview

1. Measure an existing belt to confirm medium belt size.
2. Position the belt over work clothing and adjust for comfort.
3. Arrange tool and fastener bags on the left-handed layout.
4. Secure the hammer holder and clip-on accessories.
5. Load tools and verify balanced weight and access.

Key Features

• 5 inch wide belt for added back support
• Padded wool liner for moisture wicking comfort
• 2 inch leather overbelt keeps bags from sliding
• Nickel plated steel buckles and built in suspender loops
• Edge stitched leather for durability
• Made in USA

Applications

• Comfortable support for heavy tool rigs
• Securing clip on tool bags and pouches
• Use with suspenders for balanced load carry
• General construction and carpentry work

Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to confirm size.
2. Place the belt where you wear your rig over normal work clothing.
3. Buckle using the midpoint hole for best adjustment range.
4. Attach tool bags to the overbelt and secure through belt loops.
5. Clip suspenders to the attachment loops if used.

Key Features

• Wide 5 in belt for enhanced back support
• Suspender attachment loops
• Thick padded interior for comfort and moisture wicking
• Heavy-duty buckles and belt loops minimize bag sliding
• 2 in all-leather overbelt; edge-stitched for strength
• Made in the USA

Applications

• Supporting tool bags and pouches on the jobsite
• Use with suspenders via integrated attachment loops
• Comfortable heavy-duty belt for framing, finish, or general carpentry

Installation Overview

1. Put the belt on over typical work clothing where you will wear it.
2. Measure from the buckle to the hole you use; that measurement is your belt size.
3. Select size XL (approx. 45 in belt size) and adjust using the 9-hole range.
4. Attach tool bags to the overbelt and secure through the belt loops.
5. Clip suspenders to the attachment loops if desired and check fit.

Occidental Leather 5135 LG Key Features

• 5 in wide belt for back support
• Suspender attachment loops pre-installed
• Thick padded interior for comfort and moisture control
• Heavy-duty buckles and belt loops minimize bag movement
• Edge-stitched leather construction
• Made in USA

Occidental Leather 5135 LG Applications

• Daily wear with Occidental tool bags and systems
• Added back support for heavy tool loads
• Suspender-compatible setups for long shifts
• Carpentry, framing, electrical, and general construction

Occidental Leather 5135 LG Installation Overview

1. Measure an existing tool belt from buckle tip to your used hole to confirm size.
2. Select Large (41 in mid range) and adjust using the 9-hole range.
3. Attach tool bags to the overbelt and secure using belt loops.
4. Connect suspenders to the attachment loops as needed.
5. Check fit and tighten buckles to prevent sliding.

Occidental Leather 8552 Key Features

• 2 inch belt clip for fast on off attachment
• Drawstring closure keeps contents secure yet accessible
• Dual layer 1000D nylon sides and 1050D nylon bottom for wear resistance
• Medium size: 6 in diameter x 7 in high
• Made in the USA

Occidental Leather 8552 Applications

• Carry fasteners, anchors, and small hardware
• Quick access storage for bits and small hand tools
• Add on pouch for tool belts and vests
• Jobsite organization for installers and carpenters

Occidental Leather 8552 Installation Overview

1. Slide the 2 inch clip over your belt, pocket, or strap.
2. Load hardware or tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Release the clip to reposition or remove as needed.

Occidental Leather B5114K Features

• Low-profile carry keeps tool snug and secure
• DIY installation with copper rivets and guidance
• Premium, handcrafted leather construction
• Made in USA

Occidental Leather B5114K Applications

• Framing work requiring fast cat's paw access
• Roofing tasks where low-swing storage is preferred
• General carpentry and trim installation
• Outfitting tool belts, vests, and rigs with a dedicated sleeve

Occidental Leather B5114K Installation Overview

1. Gather tools: smooth face hammer, cutters, 9/32 socket, pick, drill with 3/16 bit, and hard surface.
2. Drill out two outer rivets from the non-dominant side bag.
3. Insert the new rivet through the hanger and through the sleeve hole.
4. Seat washer using a hammer and socket or small pipe.
5. Trim rivet to leave about 1/8 to 3/16 length.
6. Peen rivet on a hard surface with a smooth face hammer to finish.