Occidental Leather
Occidental Leather Leather Belt Worn 4-in-1 Tool/Tape Holder 5522
$44.90
Unit price perOccidental Leather 5522 Description
Maximize belt space with the Occidental Leather 5522 Belt-Worn 4-in-1 Tool/Tape Holder. Built from sturdy American full-grain leather, it organizes a tape measure, pencil, lumber crayon or screwdriver, and includes a FREE 2003 Oxy Tool Shield to safely carry sharp tools. Fits belts up to 3" wide and is ideal for pros and DIYers.
Includes
- (1) Occidental Leather 5522 4-in-1 Tool/Tape Holder
- (1) Oxy Tool Shield (Model 2003)
Key Features
- 4-in-1 functionality — holds tape, pencil, lumber crayon or screwdriver, plus sharp tools
- Includes Oxy Tool Shield for safe storage of chisels, knives, and cutters
- Premium full-grain leather for durability and long service life
- Belt-ready tunnel loop fits belts up to 3" wide
- Compact design provides 4x capacity in the space of one holder
- Made in USA
Applications
- Carry and organize tape measure, marking tools, and a utility knife on the belt
- Framing, finish work, and general carpentry where quick tool access is needed
- DIY and weekend projects requiring compact tool storage
Installation Overview
- Verify belt width (up to 3").
- Thread the belt through the holder’s tunnel loop.
- Position the holder at your preferred location on the belt.
- Load tape, pencil, crayon/screwdriver, and place sharp tools in the Oxy Tool Shield.
- Check that tools are seated securely before use.
Specifications
| Material | Full-grain leather |
| Belt Fit | Up to 3" wide |
| Included | Oxy Tool Shield (Model 2003) |
| Weight | 0.7 lb (approx. 308 g) |
| Colors | OxyRed (5522), OxyBlack (B5522) |
| Made In | USA |
| Category | Tool Holster / Belt-worn holder |
Occidental Leather Leather Belt Worn 4-in-1 Tool/Tape Holder 5522
Leather belt 4-in-1 tool & tape holder
✓ 4-in-1 functionality: carry tape, pencil, lumber crayon or screwdriver, plus a sharp tool
✓ Oxy Tool Shield included (Model 2003) for safe chisel or knife carry
✓ Sturdy American leather built for years of use
✓ Fits belts up to 3" wide
✓ Made in USA
$44.90
Unit price per11 in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Leather Gear Care
Brush off grit daily and wipe with a damp rag as needed. Shake out debris periodically. For deeper cleaning, use mild soap and water only and let dry naturally. For occasional maintenance, clean then apply a small amount of non?oil?based leather conditioner. Store dry and out of direct sun. Avoid oil?based products, bleach, harsh solvents, and wipe off mud or drying compounds before they set.
- 4-in-1 Functionality — tape, pencil, lumber crayon or screwdriver, plus sharp tools
- Oxy Tool Shield Included — protection for chisels, knives, cutters
- Premium Full-Grain Leather — rugged and field-tested
- Belt-Ready — tunnel loop fits up to a 3" belt
- Compact Capacity — 4x tool storage in one holder footprint
- Made in USA
- Material: Full-grain leather
- Belt Fit: Up to 3" wide
- Weight: 0.7 lb (approx. 308 g)
- Colors: OxyRed (5522), OxyBlack (B5522)
- Included: Oxy Tool Shield (Model 2003)
$44.90
Unit price perMore About Occidental Leather Leather Belt Worn 4-in-1 Tool/Tape Holder 5522
Occidental Leather 5522 Description
Maximize belt space with the Occidental Leather 5522 Belt-Worn 4-in-1 Tool/Tape Holder. Built from sturdy American full-grain leather, it organizes a tape measure, pencil, lumber crayon or screwdriver, and includes a FREE 2003 Oxy Tool Shield to safely carry sharp tools. Fits belts up to 3" wide and is ideal for pros and DIYers.
Includes
- (1) Occidental Leather 5522 4-in-1 Tool/Tape Holder
- (1) Oxy Tool Shield (Model 2003)
Key Features
- 4-in-1 functionality — holds tape, pencil, lumber crayon or screwdriver, plus sharp tools
- Includes Oxy Tool Shield for safe storage of chisels, knives, and cutters
- Premium full-grain leather for durability and long service life
- Belt-ready tunnel loop fits belts up to 3" wide
- Compact design provides 4x capacity in the space of one holder
- Made in USA
Applications
- Carry and organize tape measure, marking tools, and a utility knife on the belt
- Framing, finish work, and general carpentry where quick tool access is needed
- DIY and weekend projects requiring compact tool storage
Installation Overview
- Verify belt width (up to 3").
- Thread the belt through the holder’s tunnel loop.
- Position the holder at your preferred location on the belt.
- Load tape, pencil, crayon/screwdriver, and place sharp tools in the Oxy Tool Shield.
- Check that tools are seated securely before use.
Specifications
| Material | Full-grain leather |
| Belt Fit | Up to 3" wide |
| Included | Oxy Tool Shield (Model 2003) |
| Weight | 0.7 lb (approx. 308 g) |
| Colors | OxyRed (5522), OxyBlack (B5522) |
| Made In | USA |
| Category | Tool Holster / Belt-worn holder |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
