Sort by:
Occidental Leather 5520 Description
The Occidental Leather 5520 5-in-1 Tool Holder maximizes belt space by organizing essentials in a compact leather holster. Carry a hammer, pliers, pencil, lumber crayon or screwdriver, plus a sharp tool using the included Oxy Tool Shield. Built from rugged American leather and fits belts up to 3" wide.
Occidental Leather 5520 Includes
- (1) Occidental Leather 5520 5-in-1 Tool Holder
- (1) 2003 Oxy Tool Shield
- (1) Tool Bag
Occidental Leather 5520 Key Features
- 5-in-1 capacity — holders for hammer, pliers, pencil, lumber crayon/screwdriver, and sharp tools
- Includes removable Oxy Tool Shield for chisels, knives, or similar
- Premium full-grain American leather construction
- Compact footprint saves belt space; fits belts up to 3" wide
- Made in the USA
Occidental Leather 5520 Applications
- Framing: Keep core hand tools at the ready
- Electrical work: Organize pliers, drivers, and markers
- Carpentry: Carry chisels, hammers, and layout tools
- Punch-list/finish tasks: Streamlined, compact tool access
Occidental Leather 5520 Installation Overview
- Slide the holder onto a work belt up to 3" wide.
- Insert the removable Oxy Tool Shield into its pocket if using sharp tools.
- Load tools into the designated holders (hammer, pliers, pencil, crayon/screwdriver).
- Check retention and accessibility; adjust tool placement as needed.
Occidental Leather 5520 Specifications
| Material | Full-grain American leather |
| Dimensions | 3.5" x 7.75" |
| Belt Fit | Up to 3" wide |
| Includes | 2003 Oxy Tool Shield |
| Country of Manufacture | USA |
Occidental Leather 5522 Description
Maximize belt space with the Occidental Leather 5522 Belt-Worn 4-in-1 Tool/Tape Holder. Built from sturdy American full-grain leather, it organizes a tape measure, pencil, lumber crayon or screwdriver, and includes a FREE 2003 Oxy Tool Shield to safely carry sharp tools. Fits belts up to 3" wide and is ideal for pros and DIYers.
Includes
- (1) Occidental Leather 5522 4-in-1 Tool/Tape Holder
- (1) Oxy Tool Shield (Model 2003)
Key Features
- 4-in-1 functionality — holds tape, pencil, lumber crayon or screwdriver, plus sharp tools
- Includes Oxy Tool Shield for safe storage of chisels, knives, and cutters
- Premium full-grain leather for durability and long service life
- Belt-ready tunnel loop fits belts up to 3" wide
- Compact design provides 4x capacity in the space of one holder
- Made in USA
Applications
- Carry and organize tape measure, marking tools, and a utility knife on the belt
- Framing, finish work, and general carpentry where quick tool access is needed
- DIY and weekend projects requiring compact tool storage
Installation Overview
- Verify belt width (up to 3").
- Thread the belt through the holder’s tunnel loop.
- Position the holder at your preferred location on the belt.
- Load tape, pencil, crayon/screwdriver, and place sharp tools in the Oxy Tool Shield.
- Check that tools are seated securely before use.
Specifications
| Material | Full-grain leather |
| Belt Fit | Up to 3" wide |
| Included | Oxy Tool Shield (Model 2003) |
| Weight | 0.7 lb (approx. 308 g) |
| Colors | OxyRed (5522), OxyBlack (B5522) |
| Made In | USA |
| Category | Tool Holster / Belt-worn holder |
Occidental Leather 9596 Description
This Adjust-to-Fit Pro Electrician tool belt system delivers all-leather NoSpill™ holders with a hand-specific layout for fast, efficient access. The ergonomic belt fits 32" to 40" waists and is built for durability and comfort for industrial and commercial electrical work. Made in the USA.
Occidental Leather 9596 Includes
- (1) 9596 Adjust-to-Fit Pro Electrician Tool Belt System
Occidental Leather 9596 Key Features
- NoSpill™ leather tool holders form to tools and help prevent drops
- Hand-specific organization for efficient workflow
- Adjust-to-Fit belt for 32"–40" waists
- Ergonomic design for balanced weight and all-day comfort
- All-leather bag construction; built for long-term jobsite use
- Made in the USA
Occidental Leather 9596 Applications
- Industrial and commercial electrical installations
- Service calls and troubleshooting
- Rough-in and trim-out electrical work
- General jobsite tool and fastener organization
Occidental Leather 9596 Installation Overview
- Measure your current tool belt from the buckle end to the used hole to confirm sizing.
- Set the Adjust-to-Fit belt to your measurement (within 32"–40" range).
- Position pouches and holders for hand-specific access.
- Secure the belt at the midpoint hole for best adjustment range.
- Load tools and confirm comfort and balance before use.
Occidental Leather 9596 Specifications
| Brand | Occidental Leather |
| SKU | 9596 |
| Material | All-leather bags with Adjust-to-Fit belt |
| Waist Size | Adjustable, 32"–40" |
| Weight | 5.2 lb |
| Country of Manufacture | USA |
| Color | Black |
Occidental Leather 5328 Description
Hand crafted from rugged 10 oz Latigo belting leather, the Occidental Leather 5328 Large Clip-On Phone Holster protects plus-size smartphones with an Italian-style drop clasp and a heavy-duty spring steel belt clip. Clips securely to belts up to 2" wide. Made in the USA.
Occidental Leather 5328 Includes
- (1) Occidental Leather 5328 Clip-On Leather Phone Holster (Large)
Occidental Leather 5328 Features
- 10 oz Latigo belting leather for durability
- Heavy-duty spring steel belt clip for secure attachment
- Italian-style drop clasp for protected, quick access
- Fits iPhone 6 Plus, 7 Plus & similarly sized phones (verify dimensions)
- Clips to belts up to 2" wide
- Made in the USA
Occidental Leather 5328 Applications
- Hands-free phone carry on work belts
- Protection for larger smartphones on jobsites
- Daily use for tradespeople, contractors, and field techs
Occidental Leather 5328 Installation Overview
- Clip the holster onto a belt up to 2" wide.
- Insert phone into the pouch.
- Close and secure the drop clasp.
- Verify the clip is firmly attached before use.
Occidental Leather 5328 Specifications
| Material | 10 oz Latigo belting leather |
| Clip Type | Heavy-duty spring steel |
| Closure | Italian-style drop clasp |
| Belt Fit | Up to 2" wide |
| Interior Dimensions | 7.0" H x 3.25" W x 0.75" D |
| Weight | 0.458 lb |
| Country of Origin | USA |
Occidental Leather 5588 Description
The Stronghold Master Carpenter Case delivers high-capacity, upright tool organization in a compact tote. Built with an all-leather main body, a water-resistant rubber base, and a hand-shaped leather handle that molds to your grip, it keeps essentials visible and easy to access with three internal compartments and 45 pockets/tool holders.
Occidental Leather 5588 Includes
- (1) 5588 Stronghold Master Carpenter Case
- (1) 5042 Tape Holster
- (1) 9501 Clip-On Pouch
- (2) Oxy Tool Shields (Model 2003)
- (1) Integrated rafter square holster
- (1) Side zip pouch for bits and small parts
- D-rings for optional shoulder strap (strap not included)
Occidental Leather 5588 Key Features
- Upright, open-top design for quick tool access
- Leather main body for long-term durability
- Water-resistant rubber bottom protects contents
- Handcrafted leather handle molds to your grip
- 3 interior compartments with 45 total pockets/tool holders
- Removable accessories: 5042 Tape Holster, 9501 Clip-On Pouch, and 2 Oxy Tool Shields
- Integrated rafter square holster and side zip pouch
- D-rings for attaching an optional shoulder strap
- Made in the USA
Occidental Leather 5588 Applications
- Jobsite tool transport and organization for carpenters
- Service and repair tool storage with fast access
- Bench-to-field carry for finish and trim work tools
- Shop organization for frequently used hand tools
Occidental Leather 5588 Installation Overview
- Load tools into the three main compartments by category.
- Use outer pockets and the zip pouch for small parts and bits.
- Attach removable 5042, 9501, and Oxy Tool Shields as needed.
- Place rafter square in the dedicated holster.
- Clip a shoulder strap to D-rings if desired and carry by the leather handle.
Occidental Leather 5588 Specifications
| Material | Leather main body with water-resistant rubber base |
| Handle | Hand-shaped leather handle |
| Compartments | 3 |
| Pockets/Tool Holders | 45 |
| Dimensions | 15.5" L x 8.5" W x 8" H |
| Weight | Approx. 7.5–7.6 lb |
| Accessories | 5042 Tape Holster, 9501 Clip-On Pouch, (2) 2003 Oxy Tool Shields |
| Country of Origin | USA |
Occidental Leather 9920 Description
The Occidental Leather 9920 Iron Worker’s Leather Bolt Bag is built from rugged Pro Leather and features bull-pin loops on both sides plus a tunnel belt loop that fits up to 3" work belts. Compact and durable, it keeps bolts, hardware, and drift pins secure and within reach—ideal for structural steel and ironwork.
Occidental Leather 9920 Includes
- (1) Occidental Leather 9920 Iron Worker’s Bolt Bag
Occidental Leather 9920 Features
- Pro-Grade Leather construction for long-term jobsite durability
- Bull-pin loop on each side for drift pins or spud wrenches
- Tunnel belt loop fits up to 3" wide work belts
- Streamlined profile with ample storage
- Made in the USA
Occidental Leather 9920 Applications
- Carrying bolts, nuts, and fasteners on steel erection jobs
- Holding drift pins and spud wrenches for ironwork
- General hardware storage on tool belts and harness belts
Occidental Leather 9920 Installation Overview
- Slide the tunnel loop onto a work belt up to 3" wide.
- Position the bag at a comfortable reach point.
- Load hardware and place drift pins in side loops.
- Verify secure fit before starting work.
Occidental Leather 9920 Specifications
| Material | Pro-Grade Leather |
| Pockets & Tool Holders | 3 |
| Main Bag Size | 9" W x 8.5" H |
| Belt Compatibility | Tunnel loop fits up to 3" wide belts |
| Weight | 1.3 lbs |
| Country of Origin | USA |
| SKU | 9920 |
Occidental Leather 5518 No Slap Hammer Holder Description
Secure and stabilize your hammer with the all-leather No Slap Hammer Holder. The long sleeve-style design keeps handles upright to minimize swing and prevent “knee-capping,” while fitting belts up to 3” wide. Built from heavy-duty leather and made in the USA.
Includes
- (1) Occidental Leather 5518 No Slap Hammer Holder
Key Features
- Long sleeve design reduces tool swing and keeps handles secure
- All-leather construction for durability
- Holds hammers, hammer tackers, and flat bars (up to 1 5/8” diameter)
- Fits work belts up to 3” wide
- Made in the USA
Applications
- Carry and secure hammers while walking or climbing
- Hold hammer tackers and flat bars without excessive swinging
- Ideal for framing, carpentry, and general construction
Installation Overview
- Thread the holder onto a belt up to 3” wide.
- Position the sleeve at your preferred carry location.
- Insert the tool handle fully into the leather sleeve.
- Verify secure fit and minimal swing during movement.
Specifications
| Material | Heavy-duty leather |
| Tool Capacity | Hammers, tackers, flat bars up to 1 5/8” diameter |
| Belt Compatibility | Up to 3” wide |
| Weight | 0.3 lb |
| Country of Origin | USA |
Occidental Leather 1550 Description
Upgrade your carry system with the Stronghold Insta-Vest Kit Plus Suspender Package. This belt-free setup features clip-on gear pockets with 7 pockets/tool holders to keep essentials organized and within easy reach. Made in the USA.
Occidental Leather 1550 Includes
- (1) Stronghold Insta-Vest Kit Plus Suspender Package
Occidental Leather 1550 Features
- 7 pockets & tool holders for organized storage
- Clip-on gear pockets for quick modular access
- Integrated glasses holder and a secure-closure pouch
- Lightweight design — only .83 lbs
- Made in the USA
Occidental Leather 1550 Applications
- Hands-free tool carry for carpentry, electrical, and general trades
- Organized access to small tools, fasteners, and accessories
- Belt-free setup for mobility on jobsites and in workshops
Occidental Leather 1550 Installation Overview
- Wear the Insta-Vest and adjust straps for a secure, comfortable fit.
- Attach clip-on gear pockets to the suspenders/vest positions as desired.
- Load tools and accessories evenly across pockets and holders.
- Secure flaps/closures and confirm clear range of motion before use.
Occidental Leather 1550 Specifications
| Weight | .83 lbs |
| Overall Dimensions | 17" x 7" x 3.5" O. A. |
| Glasses Holder | 3" x 6" x 1.5" |
| Pouch with Closure | 5.5" x 4.5" Deep |
| Pockets/Tool Holders | 7 |
| Country of Origin | USA |
Occidental Leather 9512 Description
The Occidental Leather 9512 Task Pouch keeps essentials organized in a compact profile. Built from industrial 2-ply Cordura® with a foam core, it provides dedicated slots for a tape measure, spiral pad, pens, pencils, screwdriver, utility knife, and pliers. Accepts belts up to 2″ wide and is made in the USA.
Occidental Leather 9512 Includes
- (1) Occidental Leather 9512 Task Pouch
Occidental Leather 9512 Key Features
- Tool-specific storage for tape, spiral pad, pens, pencils, screwdriver, utility knife & pliers
- Industrial 2-ply Cordura® with foam core for structure and durability
- Compact footprint ideal for light-duty tasks, inspections, and service work
- Accepts work belts up to 2″ wide for a secure fit
- Made in the USA
Occidental Leather 9512 Applications
- Punch list work where minimal tools are needed
- Service calls and field repairs
- Inspections and walkthroughs
- Light-duty maintenance tasks
- Everyday carry for essential hand tools
Occidental Leather 9512 Installation Overview
- Slide the pouch onto a work belt up to 2″ wide.
- Organize essential tools in the designated pockets.
- Securely seat heavier items like a tape measure in the main compartment.
- Verify comfortable positioning on belt before use.
- Remove debris periodically to maintain smooth access.
Occidental Leather 9512 Specifications
| Pockets & Tool Holders | 8 |
| Dimensions | 5″ W x 5″ H |
| Material | Industrial 2-ply Cordura® with foam core |
| Fits Belt Width | Up to 2″ wide |
| Weight | 0.4 lbs |
| Made In | USA |
Occidental Leather 8578 Description
The Clip-On Stronghold® Essentials Gear Pocket (Model 8578) mounts to the chest of Stronghold suspenders using a durable spring steel clip, keeping small tools and your smartphone secure and within easy reach. It features a padded phone sleeve with velcro flap, holders for pencils and a notepad, plus a divided pocket for driver bits. Made in the USA.
Occidental Leather 8578 Includes
- (1) 8578 Clip-On Stronghold Essentials Gear Pocket
Occidental Leather 8578 Key Features
- Clip-on mount with spring steel clip for chest attachment to Stronghold suspenders
- Padded smartphone sleeve with velcro flap for secure carry
- Organizers for pencils, notepad, and driver bits
- Seven total pockets/tool holders
- Easy to install and remove
- Made in the USA
Occidental Leather 8578 Applications
- Chest-mounted storage on Stronghold suspenders
- Quick access to phone, pencils, notepad, and driver bits
- Staying organized while climbing ladders or moving on the jobsite
- Lightweight carry for everyday trade essentials
Occidental Leather 8578 Installation Overview
- Position the spring steel clip over the chest strap of Stronghold suspenders.
- Press to fully seat the clip until the pocket is secure.
- Load tools, phone, and accessories into the designated sleeves.
- Close the phone flap and check retention before use.
- Remove by lifting the clip when you need to reposition or store.
Occidental Leather 8578 Specifications
| Total Pockets/Holders | 7 |
| Overall Dimensions | 9.75" W x 7.5" H |
| Weight | 0.385 lbs |
| Attachment | Clip-on with spring steel clip |
| Phone Sleeve | Padded with velcro flap |
| Country of Manufacture | USA |
Occidental Leather 8574 Description
Handcrafted clip-on leather phone holster with heavy-duty elastic sides and a secure Velcro® closure. Designed for compact phones such as iPhone 6/7/8/X and Galaxy S6/S7/S9 (not Plus/Max sizes). Includes a 2” spring steel belt clip for fast attachment to belts or waistbands. Made in the USA.
Occidental Leather 8574 Includes
- (1) Clip-On Expandable Phone Holster
Occidental Leather 8574 Features
- Velcro® closure for quick, secure access
- Expandable elastic sides — up to 1-1/2” of flex
- 2” spring steel belt clip for firm attachment
- Handcrafted full-grain leather construction
- Made in the USA
Occidental Leather 8574 Applications
- Daily carry on belt or waistband
- Jobsite phone protection and quick access
- Secure storage for compact smartphones
- Walking, commuting, and on-the-go use
Occidental Leather 8574 Installation Overview
- Slide or clip the 2” steel clip onto belt/waistband.
- Place phone into the pocket.
- Close the flap and press the Velcro® to secure.
- Confirm a snug fit before use.
Occidental Leather 8574 Specifications
| Material | Leather with elastic side panels |
| Belt Clip | 2” spring steel |
| Pocket Size | 3.5” x 5.5” |
| Expandability | Elastic sides expand up to 1-1/2” |
| Compatibility | Compact phones (e.g., iPhone 6/7/8/X; Galaxy S6/S7/S9); not for Plus/Max sizes |
| Country of Origin | USA |
| Weight | 0.2 lb |
| SKU | 8574 |
| GTIN | 759244326208 |
Occidental Leather 5527 Offset Snip Holster Description
Keep offset snips and pruning shears secure and close at hand. This full-grain leather holster fits popular offset metal snips such as Wiss M6/M7 and similar tools, accepts belts up to 3″ wide, and is proudly made in the USA.
Occidental Leather 5527 Includes
- (1) Offset Snip Holster
Occidental Leather 5527 Features
- Designed for offset metal snips (Wiss M6/M7) & pruning shears
- Full-grain American leather construction for durability
- Works with belts up to 3″ wide for stable carry
- Compatible with Oxy™ Tool Shield for added protection
- Made in the USA
Occidental Leather 5527 Applications
- Steel framing and sheet metal work
- General contracting and remodeling
- Landscaping and pruning tasks
- DIY projects requiring frequent snip use
Occidental Leather 5527 Installation Overview
- Slide holster onto a work belt up to 3″ wide.
- Seat the holster in your preferred position for easy reach.
- Insert offset snips or pruning shears into the pouch.
- Optionally add an Oxy™ Tool Shield for extra liner protection.
Occidental Leather 5527 Specifications
| Material | Full-grain American leather |
| Dimensions | 4″ W x 7.75″ H |
| Belt Compatibility | Up to 3″ wide |
| Weight | Approx. 0.3 lb (145 g) |
| Fits Tools | Offset snips (Wiss M6/M7) & pruning shears |
| Origin | Made in USA |
Occidental Leather 8068 Impact Gun and Drill Bag Description
Compact drill/screw gun storage designed for the right side. The main bag features two compartments — a dedicated holster for cordless drills or screw guns and a pouch for tools or quick-release clamps used in metal stud work. Includes a patented 2-in-1 outer pouch, holders for driver bits and pencil, a right-rear leather sleeve for Clip-On items, and a rafter square slot behind the outer pouch with a rear-facing square edge. Made in the USA.
Occidental Leather 8068 Includes
- (1) Impact / Screw Gun and Drill Bag
Occidental Leather 8068 Features
- Main bag with two compartments: holster plus tool/clamp pouch
- Right-side layout; holster fits cordless drills or screw guns
- Patented 2-in-1 outer pouch for flexible storage
- Driver bit and pencil holders
- Leather sleeve for Clip-On accessories
- Rafter square slot positioned behind outer pouch; square edge to rear
- Ideal for metal framing
- Made in the USA
Occidental Leather 8068 Applications
- Carry and protect cordless drills or screw guns on the job
- Organize driver bits, pencils, and small hand tools
- Hold quick-release clamps for metal stud work
- Keep a rafter square accessible while framing
- Add clip-on accessories via leather sleeve
Occidental Leather 8068 Specifications
| Pockets & Tool Holders | 9 |
| Weight | 1.25 lbs |
| Orientation | Right side |
