Sort by:
Occidental Leather 5237 Description
Specifically designed for the 35 ft FatMax, this high-mount, clip-on extra large tape holster offers quick, easy access and secure carry on your belt. Premium leather construction with a rugged steel clip keeps your tape within reach all day.
Occidental Leather 5237 Includes
- (1) Clip-On Tape Holster - Extra Large
Occidental Leather 5237 Key Features
- High-mount, clip-on design installs without removing your belt
- Sized to fit 35 ft FatMax tape measures
- Proprietary steel belt clip fits belts up to 2 inches wide
- Heirloom-quality leather for long-lasting durability
- Made in USA
Occidental Leather 5237 Applications
- Secure belt carry for 35 ft tape measures on the jobsite
- Fast access measuring for framing, trim, and general carpentry
- Upgrade or replacement holster for tool belts and work pants
Occidental Leather 5237 Installation Overview
- Slide or clip the steel clip over your belt (up to 2 inches wide).
- Position the holster high on the belt for reduced swing.
- Insert the tape measure into the pouch opening until fully seated.
- Check retention and adjust holster position for comfort.
- Remove by lifting the clip tab and sliding off the belt.
Occidental Leather 5237 Specifications
| Material | Leather |
| Size | XL |
| Color | Oxy Red |
| Compatibility | Fits 35 ft FatMax tape measures |
| Belt Compatibility | Fits up to 2 inch wide belts |
| Clip Material | Proprietary steel belt clip |
| Country of Origin | USA |
Occidental Leather B5114K Description
Handcrafted leather sleeve kit that keeps a cat's paw tight to the body for low-profile carry. Easy to install on a pouch or vest; interior measures 10 x 2 x 0.75 and the kit includes copper rivets, instructions, and a video link.
Occidental Leather B5114K Includes
- (1) Cat's Paw Sleeve Kit
- (1) Copper Rivet Set
- (1) Installation Instructions
- (1) Video Tutorial Link
Occidental Leather B5114K Features
- Low-profile carry keeps tool snug and secure
- DIY installation with copper rivets and guidance
- Premium, handcrafted leather construction
- Made in USA
Occidental Leather B5114K Applications
- Framing work requiring fast cat's paw access
- Roofing tasks where low-swing storage is preferred
- General carpentry and trim installation
- Outfitting tool belts, vests, and rigs with a dedicated sleeve
Occidental Leather B5114K Installation Overview
- Gather tools: smooth face hammer, cutters, 9/32 socket, pick, drill with 3/16 bit, and hard surface.
- Drill out two outer rivets from the non-dominant side bag.
- Insert the new rivet through the hanger and through the sleeve hole.
- Seat washer using a hammer and socket or small pipe.
- Trim rivet to leave about 1/8 to 3/16 length.
- Peen rivet on a hard surface with a smooth face hammer to finish.
Occidental Leather B5114K Specifications
| Interior Dimensions | 10 x 2 x 0.75 |
| Color | Black |
| Material | Leather |
| Size | One Size |
| Country of Origin | USA |
| SKU | B5114K |
Occidental Leather 5808 SM Description
Durable everyday leather belt built for work, made from 9–10 oz Latigo leather with edge stitching and a solid stainless steel roller buckle; 1.5 inch width fits standard belt loops.
Occidental Leather 5808 SM Includes
- (1) Working Man's Pant Belt V2
Occidental Leather 5808 SM Features
- 9–10 oz Latigo leather
- Edge-stitched finish
- 1.5 inch width fits standard belt loops
- Solid stainless steel roller buckle
- Sizes SM–XL
- Made in USA
Occidental Leather 5808 SM Specifications
| Material | 9–10 oz Latigo leather |
| Buckle | Solid stainless steel roller |
| Colors Available | Oxy Red, Black, Brown, Chestnut |
Occidental Leather 5570 Description
The Occidental Leather Commercial Drywall Case is crafted from full grain leather and designed for drywall professionals. It offers exceptional tool organization with dedicated holders for essential tools, ensuring durability and efficiency on the job. Optimized for right-handed use and made in the USA.
Occidental Leather 5570 Includes
- (1) Commercial Drywall Case
Occidental Leather 5570 Features
- Full grain leather construction for durability
- Dedicated holders for circle cutter, metal snips, saw, knife, Surform, Oxy tool shield, C-clamps, pencils, and hammer
- Designed for right hand use
- Optimized for drywall professionals
- Keeps all essential tools within easy reach
- Made in the USA
Occidental Leather 5570 Specifications
| Brand Name | Occidental Leather |
| Material | Leather |
| Color | Brown |
| Country of Origin | United States |
| Overall Height (in) | 15 |
| Overall Width (in) | 10 |
| Overall Depth (in) | 5 |
| Weight (lbs) | 2 |
| Tool Belt Type | Toolbelt Accessories |
| Warranty Type | 2 Years Limited |
| Product Condition | New |
| California Proposition 65 Warning Required | Yes |
Occidental Leather B5625 SM Description
Green Building framer setup in classic black premium leather. Hand-specific bag layout, NoSpill holders, and reinforced stress points deliver fast access and long service life. Made in the USA.
Occidental Leather B5625 SM Includes
- (1) 5035 HD 3 in. Ranger Work Belt (Small)
- (1) B5611 Green Building Fastener Bag
- (1) B5612 Green Building Tool Bag
- (1) 5020 2-in-1 Tool and Hammer Holder
- (2) 2003 Oxy Tool Shield
Occidental Leather B5625 SM Key Features
- Premium top-grain leather construction
- Side-by-side upper bag and tape mount for quick access
- Hand-specific tool holders for efficient workflow
- NoSpill holder system helps keep tools secure
- Reinforced back walls at stress points for durability
- Made in the USA
Occidental Leather B5625 SM Applications
- Framing and rough carpentry
- General construction and remodeling
- Jobsite tool and fastener organization
- Daily professional use in demanding conditions
Occidental Leather B5625 SM Installation Overview
- Measure your current tool belt at the hole you use to fasten it.
- Match the measurement to the size chart; size up if between sizes.
- Load tools into hand-specific pockets and adjust belt to midpoint hole.
- Attach hammer holder and Oxy Tool Shields as preferred.
- Confirm comfort and balance; fine-tune position of bags on the belt.
Occidental Leather B5625 SM Specifications
| Material | Premium top-grain leather |
| Color | Black |
| Pockets and Tool Holders | 24 |
| Belt Size | Small |
| Weight | 5.7 lbs |
| Handedness | Right-handed layout; left-hand version available as B5625LH |
| Country of Manufacture | USA |
Occidental Leather G9019 Description
Compact single-pouch utility bag made from padded, double-wall industrial nylon. Ideal as a third bag or for light-duty tasks where extra storage is needed. Made in the USA.
Occidental Leather G9019 Includes
- (1) Nylon Universal Bag
Occidental Leather G9019 Key Features
- Compact single-compartment layout for quick access
- Padded, double-wall nylon adds structure and durability
- Lightweight design for comfortable all-day wear
- Great as a third bag or for small jobs
- Made in the USA
Occidental Leather G9019 Applications
- Extra storage on a tool belt for fasteners or small parts
- Light-duty service and punch-list tasks
- Add-on third bag for flexible belt setups
- General utility carrying on the jobsite
Occidental Leather G9019 Installation Overview
- Slide the bag onto your work belt through the rear loop.
- Position at the preferred location for access and balance.
- Load with small tools or fasteners and confirm a secure fit.
Occidental Leather G9019 Specifications
| Main bag size | 8 in W x 9 in H |
| Material | Padded double-wall industrial nylon |
| Color | Green |
| Weight | 0.4 lb |
| Origin | Made in USA |
Occidental Leather 8585 SM Description
Heritage FatLip tool belt set built for production carpenters. Ten inch deep bags feature a full leather boot and a distinctive leather FatLip mouth that holds its shape, stays open, and resists abrasion. Hand specific holders and padded two ply construction deliver comfort and organization.
Occidental Leather 8585 SM Includes
- (1) Heritage FatLip Fastener Bag
- (1) Heritage FatLip Tool Bag
- (1) HD 3 in. Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
Occidental Leather 8585 SM Features
- 25 pockets and tool holders
- Hand specific tool organization
- Padded two ply bags maintain shape
- Industrial nylon with leather reinforcements for durability
- Full leather boot and FatLip leather mouth for abrasion resistance
- Made in USA
Occidental Leather 8585 SM Applications
- General carpentry and framing tasks
- Layout, measuring, and fastening workflows
- Trim and finish punch lists
- Jobsite tool and fastener organization
Occidental Leather 8585 SM Installation Overview
- Select the correct belt size and thread the tongue through the buckle.
- Position tool and fastener bags on each side for hand preference.
- Attach the 2-in-1 holder and any accessories to desired locations.
- Load tools evenly and adjust belt for a snug, comfortable fit.
- Verify pouches are secure before use.
Occidental Leather 8585 SM Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | Small |
| Bag Depth | 10 in. |
| Weight | 5.2 lb |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Main Bag | 10 in. x 10 in. |
| Outer Bag | 9 in. x 6 in. |
| Upper Bag | 5 in. x 4.5 in. |
| UPC | 759244282306 |
Occidental Leather B5060 Description
The Black Pro Fastener Bag delivers organized storage in a three pouch layout with holders for a 1 inch blade square, angle square, cats paw loop, and driver bits. Built from premium leather, it is a favorite for framing and general carpentry.
Occidental Leather B5060 Includes
- (1) Black Pro Fastener Bag
Occidental Leather B5060 Features
- Three pouch stacked layout for fastener organization
- Dedicated holders for 1 inch blade square, angle square, cats paw loop, and driver bits
- Premium leather construction for long term durability
- Recommended for framing and general carpentry
- Left hand option available as 5060LH
Occidental Leather B5060 Applications
- Framing tasks requiring quick access to nails and layout tools
- General carpentry fastener and tool organization
- Jobsite setup where squares, bits, and pry tools need dedicated storage
Occidental Leather B5060 Installation Overview
- Thread the bag onto a compatible work belt.
- Choose side based on hand preference and workflow.
- Load fasteners into main and outer pouches.
- Place layout tools and bits into the dedicated holders.
- Check balance and adjust position on belt for comfort.
Occidental Leather B5060 Specifications
| Pockets and Tool Holders | 9 |
| Weight | 2.1 lbs |
| Main Bag | 9 x 8 in |
| Outer Bag | 7 x 6 in |
| Upper Bag | 4.5 x 4.5 in |
| Left Hand Option | 5060LH |
| Material | Leather |
| Made in | USA |
Occidental Leather 8062LH Description
The left handed OxyLights 4 pouch fastener bag is built from premium leather and industrial nylon for durable, lightweight organization. Designed for framing and general carpentry, it provides dedicated holders for a 1 inch blade square, angle square, cat's paw loop, driver bits, and more, and is worn on the right side for left handed users.
Occidental Leather 8062LH Includes
- (1) Bag
Occidental Leather 8062LH Features
- Popular OxyLights fastener bag for framing and general carpentry
- Left handed layout worn on the right side
- Holders for 1 inch blade square, angle square, cat's paw loop, driver bits
- Premium leather and industrial nylon construction
- Made in USA
Occidental Leather 8062LH Applications
- Framing tool and fastener organization
- General carpentry tasks
- Left handed jobsite setup worn on right side
Occidental Leather 8062LH Installation Overview
- Slide the bag onto a compatible work belt.
- Wear on the right side for left handed access.
- Place squares, bits, and small tools into designated holders.
- Load fasteners into the main and secondary pouches.
- Check balance and adjust position for comfort.
Occidental Leather 8062LH Specifications
| Pockets and Tool Holders | 10 |
| Main Bag | 9 in x 8 in |
| Middle Bag | 8 in x 6 in |
| Outer Bag | 5.5 in x 5.5 in |
| Upper Bag | 4.5 in x 4.5 in |
| Material | Premium leather and industrial nylon |
| Color | Green |
| Weight | 1.3 lbs |
| Handedness | Left handed (wear on right side) |
| Country of Origin | USA |
| UPC | 759244100303 |
Occidental Leather 9850LH Black Left Handed Adjust-to-Fit FatLip Tool Belt Set
Occidental Leather 9850LH Black Left Handed Adjust-to-Fit FatLip Tool Belt Set
Occidental Leather 9850LH Description
Left-handed Adjust-to-Fit FatLip tool belt set built for production carpenters. Main bags are 10 inches deep with leather-reinforced corners and bottoms. Belt section uses high density neoprene, rugged commercial nylon, and leather components, with D-rings for suspenders and hand-specific tool holders to optimize work rhythm.
Occidental Leather 9850LH Includes
- (1) Belt Assembly
- (1) Hammer Holder
Occidental Leather 9850LH Features
- Adjust-to-Fit belt allows seasonal clothing changes
- D-rings pre-installed for use with suspension systems
- Hand-specific tool holders for efficient workflow
- FatLip bag design with leather-reinforced corners and bottoms
- Left-handed layout (also available as 9850 for right-handed)
Occidental Leather 9850LH Applications
- Framing and general carpentry
- Production carpentry setups
- Jobsite tool organization and fastener storage
- Use with suspenders for heavy-load days
Occidental Leather 9850LH Installation Overview
- Measure pant waist and set belt to the appropriate Adjust-to-Fit range.
- Position left- and right-side bags for preferred reach.
- Secure hammer holder and tool shield to belt as needed.
- Load tools and fasteners; verify balance and comfort.
- Attach suspenders to pre-installed D-rings if desired.
Occidental Leather 9850LH Specifications
| Handedness | Left |
| Pockets and Tool Holders | 24 |
| Main Bag Depth | 10 in |
| Belt Adjustment Range | Pant waist 32 to 41 in |
| Color | Black |
| Materials | High density neoprene, rugged nylon, leather |
| Weight | 5.2 lb |
| UPC | 759244249200 |
| Country of Origin | USA |
Occidental Leather B5018DB Black Pro Tool Bag Description
Right-hand, all-leather professional tool bag in black with double outer bags and a built-in tape holder for tapes up to 35 ft. Compact yet roomy, it organizes everyday tools like knives, pencils, chisels, torpedo level, and hammer while riding on the right side for quick access.
Occidental Leather B5018DB Includes
- (1) B5018DB Black Pro Tool Bag
Occidental Leather B5018DB Key Features
- Right-side layout for tools most accessed with the right hand
- Integrated tape holster fits up to 35 ft tape
- Double outer bags for added organization
- Durable all-leather construction with reinforced stitching
- Made in the USA
Occidental Leather B5018DB Applications
- Daily carry of carpentry and framing hand tools
- Finish and trim work tool organization
- General construction and remodeling
- Measuring and layout tasks on site
Occidental Leather B5018DB Installation Overview
- Slide the pouch onto your work belt.
- Position on the right side for dominant-hand access.
- Load tools into main and outer pockets; place tape in the holster.
- Adjust belt for comfort and secure fit before use.
Occidental Leather B5018DB Specifications
| Pockets and Tool Holders | 11 |
| Weight | 2.1 lbs |
| Main Tool Bag | 9 x 8 in |
| Outer Bags | 5 x 5.5 in |
| Material | Leather |
| Color | Black |
| Hand Orientation | Right side wear |
| Country of Manufacture | USA |
Occidental Leather 5062LH Description
The 5062LH Left Handed 4 Pouch Pro Fastener Bag delivers high-capacity organization in a compact, all-leather design. It builds on the 3-pouch layout with an added outer pouch and dedicated slots for layout tools and bits. Worn on the right side for left-handed users, it keeps fasteners and frequently used tools within easy reach. Made in the USA.
Occidental Leather 5062LH Includes
- (1) 5062LH Left Handed 4 Pouch Pro Fastener Bag
Occidental Leather 5062LH Key Features
- Left-handed layout worn on the right side
- Same features as 5060LH plus an additional outer pouch
- Holders for blade square, angle square, driver bits, and cat's paw
- 10 total pockets and tool holders
- Full-grain leather construction for durability
- Made in the USA
Occidental Leather 5062LH Applications
- Framing and rough carpentry fastener carry
- General carpentry tool and hardware organization
- Layout tasks requiring blade and angle squares
- Daily jobsite use where quick access to bits and small tools is needed
Occidental Leather 5062LH Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the right side of the body for left-handed use.
- Load fasteners and tools into the four stacked compartments.
- Use dedicated holders for squares, bits, and cat's paw.
- Adjust placement for comfort and balanced carry.
Occidental Leather 5062LH Specifications
| Pockets and Tool Holders | 10 |
| Main Bag | 9 in x 8 in |
| Middle Bag | 7 in x 6 in |
| Outer Bag | 5.5 in x 5.5 in |
| Upper Bag | 4.5 in x 4.5 in |
| Material | Full-grain leather |
| Weight | 2.1 lb |
| Hand Orientation | Left handed; worn on right side |
| Country of Origin | USA |
Occidental Leather 8018DBLH Description
Left handed OxyLights 3 pouch tool bag designed for the left side carry. Organizes everyday tools with dedicated holders for pencils, knife, crayon, chisel, torpedo level, hammer, and a tape holster compatible with tapes up to 35 ft.
Occidental Leather 8018DBLH Includes
- (1) 8018DBLH OxyLights 3 Pouch Tool Bag
Occidental Leather 8018DBLH Features
- Left handed layout for wear on the left side
- Holders for pencils, utility knife, crayon, chisel, torpedo level, and hammer
- Tape holster fits up to a 35 ft FatMax
- Compact 3 pouch configuration with organized storage
- Lightweight OxyLights construction
Occidental Leather 8018DBLH Applications
- Daily tool organization for carpentry and framing tasks
- Measuring and layout work with quick tape access
- Punch list and trim installs requiring compact storage
Occidental Leather 8018DBLH Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the left side for left handed access.
- Load tools into dedicated holders for secure carry.
Occidental Leather 8018DBLH Specifications
| Pockets and Tool Holders | 10 |
| Main Tool Bag | 9 x 8 in |
| Outer Bag | 5 x 5.5 in |
| Weight | 1.3 lb |
| Hand | Left |
| Series | OxyLights |
| Pouch Count | 3 |
Occidental Leather 5066LH Description
All leather, heavy duty angled holster designed for left-handed users. The 5066LH improves balance and comfort, fits most cordless drills, and provides two holders for drill or driver bits.
Occidental Leather 5066LH Includes
- (1) 5066LH Left Handed Cordless Drill Holster
Occidental Leather 5066LH Key Features
- Left-handed configuration; wears on right side
- All leather construction for long-term durability
- Angled body for better balance and comfort
- Two holders for drill or driver bits
- Fits most cordless drills; accepts belts up to 3 in.
- Made in the USA
Occidental Leather 5066LH Applications
- Hands-free carry of cordless drills on the jobsite
- Quick access to drill and driver bits
- Left-handed setup for carpentry, framing, and finish work
Occidental Leather 5066LH Installation Overview
- Slide holster onto a work belt up to 3 in. wide.
- Secure the retention strap as needed.
- Insert cordless drill into the angled pocket.
- Store driver bits in the integrated bit holders.
Occidental Leather 5066LH Specifications
| Pockets and Tool Holders | 3 |
| Material | Premium leather |
| Weight | 0.6 lbs |
| Belt Width | Up to 3 in |
| Overall Height | 9 in |
| Overall Width | 5 in |
| Overall Depth | 5 in |
| Handedness | Left |
| Country of Origin | USA |
Occidental Leather 8060LH OxyLights 3 Pouch Fastener Bag - Left Handed
Occidental Leather 8060LH OxyLights 3 Pouch Fastener Bag - Left Handed
Occidental Leather 8060LH Description
The OxyLights 3 pouch fastener bag for left handed users is built from industrial nylon with leather reinforcements. Designed for framing and general carpentry, it provides dedicated holders for a 1 inch blade square, angle square, cat's paw loop, driver bits and more. Left handed layout is worn on the right side for quick access.
Occidental Leather 8060LH Includes
- (1) 8060LH OxyLights 3 Pouch Fastener Bag
Occidental Leather 8060LH Features
- 9 pockets and tool holders for organized storage
- Industrial nylon body with leather trim for durability
- Left handed layout, worn on right side
- Dedicated holders for blade square, angle square, cat's paw, driver bits
- Made in the USA
Occidental Leather 8060LH Applications
- Framing tasks requiring quick access to fasteners and layout tools
- General carpentry tool and fastener organization
- Left handed setups worn on the right side of the belt
Occidental Leather 8060LH Installation Overview
- Thread the bag onto a compatible work belt.
- Position on the right side for left handed use.
- Load fasteners and tools into the designated pockets and holders.
- Check access and balance before starting work.
Occidental Leather 8060LH Specifications
| Pockets and Tool Holders | 9 |
| Material | Leather, Nylon |
| Color | Brown, Green |
| Weight | 1.2 lbs |
| Main Bag Size | 9 x 8 in |
| Outer Bag Size | 8 x 6 in |
| Upper Bag Size | 4.5 x 4.5 in |
| Orientation | Left Handed, worn on right side |
| Country of Origin | USA |
Occidental Leather 5530 SM Stronghold Big Oxy Set
Premium leather tool belt setup built for maximum capacity and organization. Features round-bottom full-capacity bags, a 3 in heavy-duty English bridle leather work belt with steel roller buckle, and a hand-specific NoSpill layout. Includes the Oxy Tool Shield and 2-in-1 Tool and Hammer Holder. Made in the USA.
Includes
- (1) Stronghold Big Oxy Set 5530 SM
- (1) 5035 HD 3 in Ranger Work Belt
- (1) 5525 Big Oxy Fastener Bag
- (1) 5526 Big Oxy Tool Bag
- (1) 5020 2-in-1 Tool and Hammer Holder
- (1) 2003 Oxy Tool Shield
Key Features
- Round-bottom full-capacity leather bags for greater storage and durability
- NoSpill hand-specific tool holder layout
- Premium top-grain leather throughout
- 3 in heavy-duty English bridle leather belt with steel roller buckle
- 28 total pockets and tool holders
- Made in the USA
Applications
- Framing and layout work
- Trim and finish carpentry
- General carpentry and remodeling
- Jobsite tool organization and carry
- Daily professional contractor use
Installation Overview
- Measure for proper belt size per manufacturer sizing guide.
- Adjust the 3 in belt to a comfortable, secure fit.
- Position tool and fastener bags on preferred sides.
- Attach the 2-in-1 holder and Oxy Tool Shield to desired locations.
- Load tools evenly to balance weight and check all rivets and clips are secure.
Specifications
| Pockets and Holders | 28 |
| Weight | 6.3 lbs |
| Material | Premium top-grain leather |
| Belt Width | 3 in |
| Belt Material | 12 oz English bridle leather with steel roller buckle |
| Components | 5035 Belt, 5525 Fastener Bag, 5526 Tool Bag, 5020 2-in-1 Holder, 2003 Oxy Tool Shield |
| Sizes | SM to XXXL |
| Country of Manufacture | USA |
| Color | Brown, Tan |
Occidental Leather 5530 XXL Description
Built for demanding pros, the Stronghold Big Oxy tool belt setup delivers maximum capacity and organization with round bottom leather bags, a 3 inch heavy duty English bridle leather belt, and 28 pockets and tool holders. Includes Oxy Tool Shield and 2 in 1 Tool and Hammer Holder. Made in USA.
Occidental Leather 5530 XXL Includes
- (1) Stronghold Big Oxy Tool Belt Set
- (1) HD 3 inch Ranger Work Belt
- (1) Big Oxy Fastener Bag
- (1) 2 in 1 Tool and Hammer Holder
- (1) Big Oxy Tool Bag
- (1) Oxy Tool Shield
Occidental Leather 5530 XXL Key Features
- Round bottom full capacity bags for added space and durability
- NoSpill hand specific tool holder layout
- Premium top grain leather throughout
- 3 inch heavy duty English bridle leather belt with steel roller buckle
- Purpose built for framing, trim, and general carpentry
- Made in the USA
Occidental Leather 5530 XXL Applications
- Framing tasks requiring high capacity tool storage
- Trim work and finish carpentry organization
- General carpentry and remodeling
- Jobsite tool protection and quick access
- Daily professional use in demanding conditions
Occidental Leather 5530 XXL Installation Overview
- Select correct belt size and position belt at working height.
- Attach Big Oxy tool and fastener bags to the belt loops.
- Clip on the Oxy Tool Shield and mount the 2 in 1 Tool and Hammer Holder.
- Load tools into hand specific holders and adjust belt for comfort.
- Verify secure fit and balance before use.
Occidental Leather 5530 XXL Specifications
| Pockets and Tool Holders | 28 |
| Weight | 6.3 lbs |
| Material | Premium leather |
| Color | Brown and Tan |
| Belt Width | 3 in |
| Belt Size | XX Large |
| Country of Manufacture | USA |
NOTE: Always size your tool belt using a belt measurement, not pant waist size, to ensure proper fit and comfort.
Occidental Leather 5530 XXXL Description
The Stronghold Big Oxy Set delivers maximum capacity and organization with round bottom full capacity leather bags and a heavy duty 3 in work belt. Built for demanding pros, it features a hand specific NoSpill holder layout and premium top grain leather construction.
Occidental Leather 5530 XXXL Includes
- (1) HD 3 in Ranger Work Belt
- (1) Big Oxy Fastener Bag
- (1) 2-in-1 Tool and Hammer Holder
- (1) Big Oxy Tool Bag
Occidental Leather 5530 XXXL Key Features
- Round bottom full capacity bags for added space and durability
- NoSpill hand specific tool holder system
- Premium top grain leather construction
- 3 in heavy duty work belt made of 12 oz English bridle leather with steel roller buckle
- Function engineered for framing, trim, and general carpentry
Occidental Leather 5530 XXXL Applications
- Framing and rough carpentry setups
- Trim and finish carpentry tool organization
- General construction and remodeling
- Jobsite tool carry and protection
Occidental Leather 5530 XXXL Installation Overview
- Measure where you wear the belt to confirm size.
- Attach the fastener and tool bags to the belt in preferred positions.
- Clip on the 2-in-1 tool and hammer holder to the belt center or side.
- Load tools and adjust belt for comfort and balance.
- Check all rivets, clips, and holders before use.
Occidental Leather 5530 XXXL Specifications
| Pockets and Tool Holders | 28 |
| Weight | 6.3 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Belt Size | XXX-Large |
Occidental Leather B5080DBLHLG Description
Built for professional framers, this left-handed Pro Framer tool belt set is crafted from premium top grain leather for long-term, weather-resistant durability. The set delivers a balanced, hand-specific layout with 22 total pockets and holders, reinforced with copper rivets and the NoSpill system for secure, efficient tool access. Includes a 3 in. Ranger work belt, a 3 pouch Pro Tool Bag with tape holder, a 3 pouch Pro Fastener Bag, and a hammer holder. Made in the USA.
Occidental Leather B5080DBLHLG Includes
- (1) B5080DBLHLG Pro Framer Tool Belt Set — Left-Handed, Large
- (1) 5035 HD 3 in. Ranger Work Belt
- (1) 5060 3 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5018DB 3 Pouch Pro Tool Bag with Tape Holder
Occidental Leather B5080DBLHLG Key Features
- Premium top grain leather construction for work-ready durability
- Left-handed, hand-specific layout supports natural workflow
- NoSpill tool holder system keeps tools secure yet accessible
- Copper-riveted stress points for extended service life
- Built-in tape holster fits tapes up to 30 ft
- 22 total pockets and tool holders
- Made in the USA
Occidental Leather B5080DBLHLG Applications
- Framing carpentry where fast access to tools and fasteners is essential
- General carpentry tasks in demanding outdoor jobsite conditions
- Organizing and carrying hand tools, fasteners, and layout accessories
- Professional builder setups requiring a left-handed tool layout
Occidental Leather B5080DBLHLG Installation Overview
- Measure your current tool belt from the buckle end to the hole you use to confirm Large sizing per the size guide.
- Position the left-handed layout: Tool Bag on left side, Fastener Bag on right side.
- Adjust the 3 in. Ranger belt to the midpoint hole for a secure fit over work clothing.
- Load tools and fasteners into the intended holders; seat tape in the built-in holster.
- Walk and work briefly; re-adjust belt tension and bag placement for comfort.
Occidental Leather B5080DBLHLG Specifications
| Pockets & Tool Holders | 22 |
| Belt Size | Large |
| Material | Leather |
| Weight | 5.3 lbs |
| Color | Black, Tan |
| Orientation | Left-handed layout |
| Built-in Tape Holster | Fits up to 30 ft tapes |
| Components | 5035 Belt, 5018DB Tool Bag, 5060 Fastener Bag, 5012 Hammer Holder |
| Country of Origin | USA |
Occidental Leather B5080DBLH XL Pro Framer Set - Black
Professional leather tool belt system built for framers. Premium top grain leather bags with hand specific tool layout, NoSpill holders, and copper rivet reinforcement deliver jobsite durability and efficient workflow. XL size in OxyBlack with tan trim.
Includes
- (1) 5035 HD 3 in. Ranger Work Belt
- (1) 5060 3 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5018DB 3 Pouch Pro Tool Bag with Tape Holder
Key Features
- Premium top grain leather construction for weather resistant durability
- NoSpill tool holder system keeps tools secure and accessible
- Hand specific tool placement supports natural working rhythm
- Copper rivet reinforced stress points
- Built in tape holster fits tapes up to 30 ft
- Made in USA
Applications
- Framing and rough carpentry
- General construction and remodeling
- Jobsite tool and fastener organization
- Left handed professional workflow setups
Installation Overview
- Select the correct belt size and position bags for left hand use.
- Thread the 5035 Ranger belt through each bag and the hammer holder.
- Buckle and adjust to a comfortable, balanced fit.
- Load tools and fasteners by function for efficient access.
- Recheck fit and tighten as needed before work.
Specifications
| Pockets and Tool Holders | 22 |
| Belt Size | XL |
| Weight | 5.3 lbs |
| Material | Leather |
| Color | Black, Tan |
| Handedness | Left hand layout |
| Tape Holster Capacity | Up to 30 ft |
| Country of Origin | USA |
Occidental Leather 8087 SM OxyLights Driver Set Description
A lightweight yet jobsite tough driver tool belt setup for metal framing, finish carpentry and remodeling. The set combines abrasion resistant industrial nylon with leather reinforcements to reduce weight while maintaining durability. Right side bag 8068 features a holster for impact or screw guns and holders for commonly used tools; left side bag B8064 provides multi pouch storage for fasteners and layout tools. Made in the USA.
Includes
- (1) OxyLights Driver Tool Belt Set
- (1) HD 3 in Ranger Leather Work Belt
- (1) OxyLights Fastener Bag with Double Outer Bag
- (1) 2 in 1 Tool and Hammer Holder
- (1) Impact or Screw Gun and Drill Bag
Key Features
- 20 pockets and tool holders
- Hand specific tool organization
- Padded two ply bags hold their shape under load
- Industrial nylon with leather tool holders and corner reinforcement
- Right side gun holster for impact or screw guns
- Made in USA
Applications
- Metal stud framing and fastening
- Finish carpentry and trim installation
- Remodeling and punch list tasks
- General layout and fastening work
Installation Overview
- Measure and select the correct belt size for over garment wear.
- Thread the work belt through the bags and holders in preferred positions.
- Secure the hammer holder and accessories to the belt.
- Adjust the belt for a snug, balanced fit at the midpoint hole.
- Load tools and fasteners; verify balanced weight and accessibility.
Specifications
| Pockets and Holders | 20 |
| Belt Size | Small |
| Weight | 4.1 lbs |
| Materials | Leather, Nylon |
| Color | Black, Tan |
| Right Bag | 8068 Impact or Screw Gun and Drill Bag |
| Left Bag | B8064 OxyLights Fastener Bag with Double Outer Bag |
| Belt | 5035 HD 3 in Ranger Leather Work Belt |
| Holder | 5020 2 in 1 Tool and Hammer Holder |
| Origin | USA |
Occidental Leather 8087 XXL OxyLights Driver Set Description
Built for metal framing, finish carpentry and remodeling, this lightweight driver setup blends industrial nylon with leather reinforcements to reduce weight while staying jobsite tough. The right side gun bag 8068 includes a holster for impact or screw guns plus clamp and tool holders. The left side fastener bag B8064 features a double outer pouch layout for fasteners and small tools. Made in USA.
Includes
- (1) 8087 XXL OxyLights Driver Set
- (1) HD 3 in Ranger Leather Work Belt
- (1) OxyLights Fastener Bag with Double Outer Bag B8064
- (1) 2-in-1 Tool and Hammer Holder 5020
- (1) Impact or Screw Gun and Drill Bag 8068
Key Features
- 20 pockets and tool holders
- Hand specific tool holder layout
- Padded two ply bags maintain shape
- Industrial nylon with leather reinforced corners and holders
- HD 3 in Ranger leather belt included
- Made in USA
Applications
- Metal stud framing and layout
- Finish carpentry tasks
- Remodeling and punch list work
- Fastener and small tool organization
Installation Overview
- Measure your existing tool belt from buckle end to used hole to confirm XXL size.
- Thread the 8068 and B8064 bags onto the HD Ranger belt in your preferred layout.
- Secure the belt at the midpoint hole for optimal adjustment range.
- Load tools and fasteners into dedicated pockets and holsters.
- Adjust fit and balance as needed for comfort and access.
Specifications
| Pockets and Tool Holders | 20 |
| Belt Size | XXL |
| Weight | 4.1 lb |
| Materials | Leather, Industrial Nylon |
| Color | Black and Tan |
| Components | 8068 Gun Bag, B8064 Fastener Bag, 5020 Tool and Hammer Holder, 5035 HD 3 in Ranger Belt |
Occidental Leather 8089LH SM Description
The OxyLights 7 Bag Framer Set combines abrasion resistant industrial nylon with leather reinforcements to reduce weight while maintaining durability. This left handed setup uses hand specific, NoSpill leather tool holders and padded two ply bags that keep their shape. Made in USA.
Occidental Leather 8089LH SM Includes
- (1) HD 3 in. Ranger Work Belt
- (1) OxyLights 4 Pouch Fastener Bag
- (1) Hammer Holder
- (1) OxyLights 3 Pouch Tool Bag with Tape Holder
Occidental Leather 8089LH SM Key Features
- 22 pockets and tool holders for high capacity
- Hand specific, NoSpill leather tool holders
- Padded two ply bags maintain structure
- Industrial nylon with leather reinforcements for long wear
- Left handed layout; Made in USA
Applications
- Framing and rough carpentry
- Jobsite fastener and tool organization
- General construction and remodeling
- Left handed belt rig setup
Installation Overview
- Measure and select the correct belt size for over garment wear.
- Position fastener and tool bags on the left handed layout.
- Load tools and fasteners; balance weight across the belt.
- Secure the buckle and adjust for a snug, comfortable fit.
- Verify hammer holder and tape position for easy access.
Occidental Leather 8089LH SM Specifications
| Pockets and Tool Holders | 22 |
| Belt Size | Small |
| Weight | 4.0 lbs |
| Material | Leather, Nylon |
| Color | Green, Tan |
| Orientation | Left handed |
| Components | 5035 belt, 8062 fastener bag, 8018DB tool bag, 5012 hammer holder |
| Country of Origin | USA |
Occidental Leather 8585LH XXL Description
Built for production carpenters, this left-handed Heritage FatLip setup features 10 inch deep bags with full leather boots and the signature leather FatLip mouth that stays open and resists abrasion. Padded, two-ply foam core pouches wrapped in industrial nylon keep their shape and stand up to heavy use.
Occidental Leather 8585LH XXL Includes
- (1) Heritage FatLip Tool Bag
- (1) HD 3 inch Ranger Work Belt
- (1) 2-in-1 Tool and Hammer Holder
- (1) Heritage FatLip Fastener Bag
Occidental Leather 8585LH XXL Features
- FatLip leather mouth holds shape and resists wear
- Full leather boot for rugged durability
- Hand-specific tool layout for left-handed users
- Padded two-ply foam core helps bags keep form
- Industrial nylon exterior for high abrasion resistance
- 3 inch HD Ranger Belt for comfort and stability
- Includes center back 2-in-1 tool and hammer holder
- Made in USA
Occidental Leather 8585LH XXL Applications
- Framing and production carpentry
- Deck building and exterior construction
- Remodeling and general jobsite tool organization
- Finish prep and punch list tasks
Occidental Leather 8585LH XXL Installation Overview
- Select the correct belt size and orient the left-handed layout.
- Thread pouches onto the 3 inch Ranger belt in the preferred positions.
- Attach the 2-in-1 holder at the center back.
- Load tools and fasteners; adjust belt for secure fit.
Occidental Leather 8585LH XXL Specifications
| Pockets and Tool Holders | 25 |
| Belt Size | XXL |
| Weight | 5.2 lbs |
| Material | Leather and Nylon |
| Bag Depth | 10 in |
| Belt Width | 3 in HD Ranger Belt |
| Handedness | Left |
| Made In | USA |
