Occidental Leather Left-Handed Tool Belts

Occidental Leather 9855LH Features

• Adjust-to-Fit belt for pant waist 32 in to 41 in
• D rings pre installed for suspenders
• FatLip bag design with structured mouth
• Hand specific tool holders for improved rhythm
• Rear 2 in 1 tool and hammer holder; includes Oxy Tool Shield
• Made in USA

Occidental Leather 9855LH Applications

• Production carpentry tool carry and organization
• Framing and layout work
• General jobsite fastening and measuring tasks
• Use with suspension systems for extended wear

Occidental Leather 9855LH Installation Overview

1. Measure and adjust belt to fit within 32 in to 41 in range.
2. Position tool and fastener bags for left handed layout.
3. Attach hammer holder and accessories to belt loops.
4. Load tools and fasteners; confirm balanced carry.
5. Optionally connect suspenders to pre installed D rings.

Occidental Leather B5018DBLH Features

• 11 pockets and tool holders for common carpentry tools
• Main bag 9 x 8; outer bags 5 x 5.5 for organized access
• Integrated tape holster fits tapes up to 35 ft
• Premium black leather construction; left hand model
• Made in the USA

Occidental Leather B5018DBLH Applications

• Carry and organize chisels, knives, pencils and markers
• Secure holster for 35 ft tape measures
• Hold torpedo level and hammer for framing and finish work
• Left-side wear for left-hand tool access

Occidental Leather B5018DBLH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the left side for left-hand access.
3. Load tools into designated pockets and holders.
4. Place tape measure in the built-in holster.
5. Verify balance and adjust belt for comfort.

Occidental Leather 8080DBLHLG Key Features

• Left handed layout with hand specific tool holders
• Padded two ply tool bags hold their shape
• Industrial nylon body provides high abrasion resistance
• Leather tool holders with OxyRed reinforced corners
• Lighter weight alternative to full leather framer sets

Occidental Leather 8080DBLHLG Applications

• Framing and rough carpentry tasks
• General construction and remodeling
• Jobsite tool organization and carry
• Left handed users needing a dedicated layout

Occidental Leather 8080DBLHLG Installation Overview

1. Measure an existing belt from buckle to the most used hole to determine size.
2. Select the Large belt if your measurement falls in its mid range.
3. Position the belt over work clothing and adjust for a snug fit.
4. Arrange the left handed bags and hammer holder on the belt as preferred.
5. Load tools into the hand specific holders to verify balance and access.

Occidental Leather 9525LHM Key Features

• 25 pockets and tool holders
• Innovative round-bottom, full-capacity tool bags
• Includes 2003 Oxy Tool Shield in each bag
• Hand-specific tool holder layout for left-handed users
• Engineered for trim, finish, and light framing tasks
• 12 oz belting leather with steel roller buckle and padded nylon 3 inch work belt

Occidental Leather 9525LHM Applications

• Trim carpentry and punch list work
• Finish carpentry and cabinet install
• Light framing and layout
• General tool organization on the jobsite

Occidental Leather 9525LHM Installation Overview

1. Measure an existing belt you wear over work clothes to find belt size.
2. Buckle the belt on your waist where it will be worn and note the hole used.
3. Measure from the buckle to that hole; select the belt size that matches.
4. Position tool and fastener bags for a left-handed layout; secure holders.
5. Load tools and check balance and fit; adjust for comfort.

Occidental Leather B8017DBLH Key Features

• Left handed layout worn on the left side for quick access
• Holders for pencils, work knife, chisel, level, and lumber crayon
• Heavy duty hammer loop for secure carry
• OxyRed leather reinforced corners and internal holders for durability
• Lightweight OxyLights hybrid nylon and leather construction
• Three pouch design for compact organization
• Made in USA

Occidental Leather B8017DBLH Applications

• Organizing everyday carpenter and framer hand tools
• Left side carry on work belts and belt systems
• Keeping pencils, knives, chisels, and levels at the ready
• Jobsite use where lightweight yet durable storage is needed
• General construction and finishing tasks

Occidental Leather B8017DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Secure the belt and adjust placement for comfort.
4. Load tools into dedicated holders and pouches.
5. Confirm hammer loop and tools are seated securely before use.

Occidental Leather 2580LH Features

• Wide padded shoulder support lined with Dri Lex for moisture management
• Fully adjustable straps for a comfortable fit on most builders
• Balanced load carry to reduce strain and lower back fatigue
• 36 pockets and holders keep essential tools accessible
• Quick release chest buckle and heavy duty D ring for hanging storage

Occidental Leather 2580LH Applications

• Framing tasks needing high capacity tool access
• Electrical work with balanced weight distribution
• Concrete forming and layout
• Trim and finish work in tight spaces

Occidental Leather 2580LH Installation Overview

1. Adjust shoulder straps and chest buckle for a secure, comfortable fit.
2. Attach B8064LH and B8017LH bags to the 3 in leather belting.
3. Ensure tunnel loop attachments are seated; tighten as needed.
4. Load tools into the 36 pockets and holders to balance weight.
5. Use the D ring for hanging storage when removing the vest.

Occidental Leather 9521LH Key Features

• Compact finisher layout ideal for trim, light framing and finish work
• Round bottom, full capacity main and outer bags with two ply foam core retain shape
• Clip on leather tab for tape; driver bit and nail set pouches included
• Metal hammer holder
• Left handed configuration worn on left side for fast tool access

Occidental Leather 9521LH Applications

• Trim carpentry organization
• Light framing tool carry
• Finish carpentry and punch list work

Occidental Leather 9521LH Installation Overview

1. Position on your work belt at the left hip for left handed access.
2. Secure the bag onto the belt and load tools into the dedicated pockets.
3. Attach the included Oxy Tool Shield where needed for sharp tool protection.

Key Features

• Popular 3 pouch pro layout without a tape pocket
• Double outer bags for added capacity and organization
• Tool holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Left handed configuration; worn on the left side
• Made in the USA

Applications

• Carpentry and framing tool organization
• General construction and remodeling
• Finish work tool carry
• Jobsite hand tool access and storage

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Load tools into dedicated holders and pouches.
4. Check balance and tighten belt for a secure fit.

Occidental Leather 2500LH Key Features

• Wide padded shoulder support lined with Dri-Lex for comfort
• Fully adjustable straps for freedom of movement
• Even weight distribution across the body
• 17 pockets and holders keep tools accessible
• Quick-release chest strap buckle; rear D ring for hanging
• Left-handed layout

Occidental Leather 2500LH Applications

• Framing and general carpentry
• Electrical installation and service work
• Concrete forming and finishing tasks
• Trim and finish carpentry
• Jobsite tool organization without a traditional belt

Occidental Leather 2500LH Installation Overview

1. Adjust shoulder straps and chest buckle for a secure fit.
2. Load essential tools into the built-in pockets and holders.
3. Attach compatible tool bags to the leather belting as needed.
4. Balance load between sides for even weight distribution.
5. Use rear D ring to hang the vest when storing.

Occidental Leather 5080DBLH LG Key Features

• Left handed, hand specific layout
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Built in tape holster for tapes up to 30 ft
• Pockets and tool holders: 21
• Made in USA

Occidental Leather 5080DBLH LG Applications

• Framing and rough carpentry
• General construction tool carry
• Remodeling and jobsite setup
• Efficient organization of tools and fasteners
• Left handed trades needing balanced access

Occidental Leather 5080DBLH LG Installation Overview

1. Measure your current tool belt from buckle end to the used hole to determine belt size.
2. Select size to match the midpoint measurement for proper adjustment.
3. Position tool bag on dominant left side and fastener bag on right.
4. Secure the belt using the steel roller buckle and adjust for comfort.
5. Load tools and tapes into the hand specific holders and verify balanced carry.

Occidental Leather B8064LH Key Features

• Patented 2-in-1 outer pouch with built-in angle square holster
• Four-bag layout: main, outer, upper, and 2-in-1 pouch
• Dedicated holders for tri-square, cat's paw, nail sets, and driver bits
• Left-handed configuration; worn on right side
• Industrial nylon with leather reinforcements; Made in USA

Occidental Leather B8064LH Applications

• Framing and general carpentry fastener storage
• Organizing layout tools such as angle and tri-squares
• Jobsite carry for nail sets, driver bits, and pry tools
• Left-handed belt setups worn on the right hip

Occidental Leather B8064LH Installation Overview

1. Orient the pouch for right-side wear for left-handed users.
2. Thread onto your work belt and position for comfortable reach.
3. Secure adjacent holders as needed and load tools by category.
4. Confirm clear access to the 2-in-1 outer pouch and square holster.

Occidental Leather 8086LHLG Key Features

• Hand specific tool holders for a left handed layout
• Padded two ply bags maintain shape
• Industrial nylon body for high abrasion resistance
• Leather tool holders with leather reinforced corners
• Seven bag configuration with patented 2-in-1 outer pouch

Occidental Leather 8086LHLG Installation Overview

1. Lay your current belt flat and measure from the buckle end to the most used hole.
2. Select the belt size whose mid range is closest to that measurement.
3. If you do not have a belt, use your approximate mid range waist measurement to choose size.

Occidental Leather 5080LH LG Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout promotes work rhythm
• Made in USA

Occidental Leather 5080LH LG Applications

• Framing and general carpentry
• Fastener and small tool organization on site
• Measuring and layout tasks
• Daily carry for hammers, tapes, and hand tools

Occidental Leather 5080LH LG Installation Overview

1. Put the belt on over work clothes where you normally wear it.
2. Note the hole used to fasten the belt.
3. Measure from the buckle to that hole to determine belt size.
4. Load tools into hand specific holders and adjust fit for comfort.

Occidental Leather B5060LH Key Features

• Left-handed layout worn on the right side for quick access
• Three stacked pouches with top-access tier
• 9 pockets and tool holders for common layout tools
• Premium leather construction for long-term durability
• Made in the USA

Occidental Leather B5060LH Applications

• Framing and rough carpentry fastener storage
• General carpentry and remodel tasks
• Organizing layout squares, bits, and small tools

Occidental Leather B5060LH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side to suit left-handed setups.
3. Load fasteners and layout tools into the designated pockets.
4. Check balance and adjust position for comfort.

Occidental Leather 9520LH Features

• Compact, lightweight bag ideal for trim, framing and finish work
• Round-bottom nylon main and outer bags for durability and easy access
• Speed square holder usable inside or outside
• Patented 2-in-1 outer bag increases fastener capacity
• Left-handed layout worn on right side for right-hand access
• Includes 2003 Oxy Tool Shield for sharp tool protection

Occidental Leather 9520LH Applications

• Trim carpentry organization and fastener access
• Framing tasks requiring quick tool retrieval
• Finish work where compact storage is preferred
• Left-handed setups worn on right side

Occidental Leather 9520LH Installation Overview

1. Attach bag securely to your work belt.
2. Position on the right side for left-handed layout.
3. Load fasteners and tools into main and 2-in-1 outer bag.
4. Place speed square in the designated holder (inside or outside).
5. Store sharp tools in the included Oxy Tool Shield.

Occidental Leather 5018DBLH Key Features

• Double outer bag design for organized storage
• Holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Integrated tape holster fits tapes up to 35 ft
• Left handed layout worn on the left side
• Premium leather construction

Occidental Leather 5018DBLH Applications

• Daily carry of hand tools on the jobsite
• Framing and carpentry tool organization
• Finish work where quick access to small tools is needed
• Measuring and marking with onboard tape and pencil holders

Occidental Leather 5018DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Secure the tape measure in the holster.
4. Load essential tools into designated pockets and holders.
5. Confirm balanced weight and comfortable reach before use.

Occidental Leather 9515LH Key Features

• Fully adjustable for 32 in to 41 in pant waists; ideal for seasonal clothing changes
• D-rings pre-installed for use with suspension systems
• Hand-specific, left-handed layout promotes efficient workflow
• Padded two-ply bags keep their shape
• Extremely abrasion-resistant industrial nylon with leather corner reinforcement
• Removable High Mount Hammer Holder 5059 on rear
• Made in USA

Occidental Leather 9515LH Applications

• Framing and rough carpentry setups
• General construction and remodeling tool carry
• Jobsite organization for left-handed pros
• Use with suspenders via integrated D-rings

Occidental Leather 9515LH Installation Overview

1. Adjust belt to fit 32 in to 41 in pant size using the buckle and crossover system.
2. Position bags and hammer holder to preferred left-handed layout.
3. Secure D-rings to suspenders if desired.
4. Load tools and fasteners; verify bags are balanced and secure.

Occidental Leather 5061LH Key Features

• Left handed layout with tape holster positioned on the left; worn on the right side
• All-leather construction for daily jobsite durability
• 9 total pockets and holders for fasteners and layout tools
• Dedicated slots for angle square, cat's paw, driver bits, and more
• Made in the USA

Occidental Leather 5061LH Applications

• Framing and rough carpentry setups
• Finish carpentry and trim work
• General construction and remodeling

Occidental Leather 5061LH Installation Overview

1. Thread the pouch onto a compatible work belt.
2. Wear on the right side for left handed setups.
3. Load fasteners and tools into the main, outer, and small holders.
4. Position tape in the upper tape pocket for quick access.
5. Adjust placement on the belt for comfort and reach.

Occidental Leather 8080DBLH XXL Key Features

• 20 pockets and tool holders
• Hand-specific leather tool holders for efficient workflow
• Padded two-ply nylon bags maintain shape
• Industrial nylon with leather corner reinforcement for abrasion resistance
• Made in USA

Occidental Leather 8080DBLH XXL Applications

• Framing and general carpentry tool organization
• Jobsite fastener and tool carrying
• Left-handed workflows requiring hand-specific layout

Occidental Leather 8080DBLH XXL Installation Overview

1. Measure and select the correct XXL belt size.
2. Slide tool and fastener bags onto the Ranger belt.
3. Attach the hammer holder at the rear center slot.
4. Adjust belt to preferred hole and secure fit over work clothing.
5. Load tools and fasteners; verify balanced, left-handed layout.

Occidental Leather 8585LHM Key Features

• Left-handed layout
• Leather FatLip bag mouth for structure and abrasion resistance
• Full leather boot with 10 in deep industrial nylon bags
• Hand-specific tool holders and padded two ply construction
• 25 pockets and holders; Made in USA

Occidental Leather 8585LHM Applications

• Framing and rough carpentry
• General construction and remodeling
• Finish and trim tasks requiring organized fasteners and tools
• Jobsite setups needing left-handed tool access

Occidental Leather 8585LHM Installation Overview

1. Measure an existing belt to confirm medium belt size.
2. Position the belt over work clothing and adjust for comfort.
3. Arrange tool and fastener bags on the left-handed layout.
4. Secure the hammer holder and clip-on accessories.
5. Load tools and verify balanced weight and access.

Occidental Leather 5087LHLG Features

• 21 pockets & tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout for left handed users
• Function engineered for modern builders
• Made in USA

Occidental Leather 5087LHLG Applications

• Framing and rough carpentry
• General construction and remodeling
• Left handed jobsite tool organization
• Efficient fastener and tool access

Occidental Leather 5087LHLG Installation Overview

1. Select correct belt size and thread through pouches and holders.
2. Position tape holder on right and double pouch tool bag on left.
3. Attach hammer holder and adjust locations as preferred.
4. Buckle belt and adjust for a snug, comfortable fit.
5. Load tools and fasteners; verify balanced weight and access.

Occidental Leather 9550LH Features

• Premium top-grain leather bags
• Copper rivets reinforce main bags
• Adjust-to-fit belt allows seasonal clothing changes
• D rings pre-installed for use with suspension systems
• Hand-specific tool holders for efficient workflow
• Removable high mount hammer holder on rear
• Rugged commercial nylon and high-density neoprene padding

Occidental Leather 9550LH Applications

• Framing and general carpentry setups
• Left-handed tool belt organization on the jobsite
• Use with suspension systems via pre-installed D rings

Occidental Leather 9550LH Installation Overview

1. Adjust belt to pant waist size using the crossover system until locked.
2. Position tool and fastener bags on left/right sides per left-handed layout.
3. Attach the high mount hammer holder to rear as desired.
4. Connect suspenders to D rings if using a suspension system.
5. Load tools and verify bags remain fixed without slipping.

Occidental Leather 5080LH LG Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout promotes work rhythm
• Made in USA

Occidental Leather 5080LH LG Applications

• Framing and general carpentry
• Fastener and small tool organization on site
• Measuring and layout tasks
• Daily carry for hammers, tapes, and hand tools

Occidental Leather 5080LH LG Installation Overview

1. Put the belt on over work clothes where you normally wear it.
2. Note the hole used to fasten the belt.
3. Measure from the buckle to that hole to determine belt size.
4. Load tools into hand specific holders and adjust fit for comfort.

Key Features

• Premium top-grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand-specific, left-handed layout for optimized rhythm
• Hand-set copper rivets reinforce high-wear points
• 12-oz belting leather with steel roller buckle
• 21 total pockets and tool holders
• Made in USA

Applications

• Framing and carpentry tool carry
• General construction and remodeling
• Jobsite organization of tools and fasteners
• Left-handed trades requiring hand-specific layout

Installation Overview

1. Measure and select correct belt size; fasten at midpoint hole.
2. Position tool bag on left side and fastener bag on right for left-handed use.
3. Secure hammer holder at rear and adjust belt for comfort.
4. Load tools and fasteners; verify balance and access.