Occidental Leather Left-Handed Tool Belts

Key Features

• 21 pockets & tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Hand set copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout for maximum working rhythm
• Made in USA

Applications

• Framing and general carpentry
• Jobsite tool and fastener organization
• Left handed belt setups for daily production work
• Remodeling and rough in tasks
• Outdoor construction where durable leather is preferred

Installation Overview

1. Measure an existing belt from buckle to the hole used to confirm size.
2. Wear the belt over typical work clothing and select the most comfortable hole.
3. Position fastener and tool bags for left handed use; slide onto belt.
4. Secure the steel roller buckle and check that pouches sit level on hips.
5. Load tools and adjust pouch spacing for balance and access.

Occidental Leather 9525LHM Key Features

• 25 pockets and tool holders
• Innovative round-bottom, full-capacity tool bags
• Includes 2003 Oxy Tool Shield in each bag
• Hand-specific tool holder layout for left-handed users
• Engineered for trim, finish, and light framing tasks
• 12 oz belting leather with steel roller buckle and padded nylon 3 inch work belt

Occidental Leather 9525LHM Applications

• Trim carpentry and punch list work
• Finish carpentry and cabinet install
• Light framing and layout
• General tool organization on the jobsite

Occidental Leather 9525LHM Installation Overview

1. Measure an existing belt you wear over work clothes to find belt size.
2. Buckle the belt on your waist where it will be worn and note the hole used.
3. Measure from the buckle to that hole; select the belt size that matches.
4. Position tool and fastener bags for a left-handed layout; secure holders.
5. Load tools and check balance and fit; adjust for comfort.

Occidental Leather 8086LHM Features

• Left-handed layout with hand-specific tool holders
• Patented 2-in-1 outer pouch for compact organization
• Padded two ply tool bags maintain shape
• Industrial nylon with leather corner reinforcement
• OxyRed leather NoSpill tool holders
• Made in USA

Occidental Leather 8086LHM Applications

• Framing carpentry and rough construction
• Deck building and structural layout
• General remodeling and jobsite tool organization
• Left-handed trades needing mirrored tool access

Occidental Leather 8086LHM Installation Overview

1. Measure belt size on a belt you use; do not use pant size.
2. Wear over typical work clothing and position for comfort.
3. Adjust from buckle to the hole you use to confirm fit.
4. Load tools into hand-specific holders for left-handed use.
5. Secure hammer to the high mount and check balance.

Occidental Leather 8086LH XL Key Features

• 21 pockets and tool holders
• Hand specific holder layout for left hand users
• Padded two ply tool bags keep their shape
• Extremely abrasion resistant industrial nylon
• Leather tool holders and corner reinforcement
• Made in USA

Occidental Leather 8086LH XL Applications

• Framing and rough carpentry
• General construction and remodeling
• Organizing fasteners and small tools onsite
• Left hand tool carry for improved efficiency
• Daily professional jobsite use

Occidental Leather 8086LH XL Installation Overview

1. Measure an existing belt or measure from buckle to the hole you use to confirm belt size.
2. Wear the belt over standard work clothing and adjust to a comfortable hole.
3. Position tool and fastener bags for a left hand workflow and secure to the belt.
4. Attach the high hammer mount and any clip-on holders as needed.
5. Load tools and fasteners; check balance and comfort before use.

Occidental Leather 5080DBLH SM Features

• 21 pockets and tool holders
• Premium top-grain leather construction
• 12-oz belting leather with steel roller buckle
• Copper-riveted stress points
• NoSpill tool holder system
• Left-handed, hand-specific layout
• Built-in tape holster for tapes up to 30 ft
• Made in USA

Occidental Leather 5080DBLH SM Applications

• Framing and general carpentry tool organization
• Jobsite carry of fasteners, hand tools, and layout gear
• Left-handed workflows needing hand-specific placement
• Daily professional use in outdoor conditions

Occidental Leather 5080DBLH SM Installation Overview

1. Measure your current tool belt per size guide; select Small.
2. Thread the 5035 belt through tool and fastener bags.
3. For left-handed use: place tool bag on left, fastener bag on right.
4. Attach hammer holder and adjust buckle for secure fit.
5. Load tools and verify NoSpill holders keep items secure.

Occidental Leather B5080DBLHLG Key Features

• Premium top grain leather construction for work-ready durability
• Left-handed, hand-specific layout supports natural workflow
• NoSpill tool holder system keeps tools secure yet accessible
• Copper-riveted stress points for extended service life
• Built-in tape holster fits tapes up to 30 ft
• 22 total pockets and tool holders
• Made in the USA

Occidental Leather B5080DBLHLG Applications

• Framing carpentry where fast access to tools and fasteners is essential
• General carpentry tasks in demanding outdoor jobsite conditions
• Organizing and carrying hand tools, fasteners, and layout accessories
• Professional builder setups requiring a left-handed tool layout

Occidental Leather B5080DBLHLG Installation Overview

1. Measure your current tool belt from the buckle end to the hole you use to confirm Large sizing per the size guide.
2. Position the left-handed layout: Tool Bag on left side, Fastener Bag on right side.
3. Adjust the 3 in. Ranger belt to the midpoint hole for a secure fit over work clothing.
4. Load tools and fasteners into the intended holders; seat tape in the built-in holster.
5. Walk and work briefly; re-adjust belt tension and bag placement for comfort.

Occidental Leather 8060LH Features

• 9 pockets and tool holders for organized storage
• Industrial nylon body with leather trim for durability
• Left handed layout, worn on right side
• Dedicated holders for blade square, angle square, cat's paw, driver bits
• Made in the USA

Occidental Leather 8060LH Applications

• Framing tasks requiring quick access to fasteners and layout tools
• General carpentry tool and fastener organization
• Left handed setups worn on the right side of the belt

Occidental Leather 8060LH Installation Overview

1. Thread the bag onto a compatible work belt.
2. Position on the right side for left handed use.
3. Load fasteners and tools into the designated pockets and holders.
4. Check access and balance before starting work.

Occidental Leather 5066LH Key Features

• Left-handed configuration; wears on right side
• All leather construction for long-term durability
• Angled body for better balance and comfort
• Two holders for drill or driver bits
• Fits most cordless drills; accepts belts up to 3 in.
• Made in the USA

Occidental Leather 5066LH Applications

• Hands-free carry of cordless drills on the jobsite
• Quick access to drill and driver bits
• Left-handed setup for carpentry, framing, and finish work

Occidental Leather 5066LH Installation Overview

1. Slide holster onto a work belt up to 3 in. wide.
2. Secure the retention strap as needed.
3. Insert cordless drill into the angled pocket.
4. Store driver bits in the integrated bit holders.

Occidental Leather 8018DBLH Features

• Left handed layout for wear on the left side
• Holders for pencils, utility knife, crayon, chisel, torpedo level, and hammer
• Tape holster fits up to a 35 ft FatMax
• Compact 3 pouch configuration with organized storage
• Lightweight OxyLights construction

Occidental Leather 8018DBLH Applications

• Daily tool organization for carpentry and framing tasks
• Measuring and layout work with quick tape access
• Punch list and trim installs requiring compact storage

Occidental Leather 8018DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Load tools into dedicated holders for secure carry.

Occidental Leather 5062LH Key Features

• Left-handed layout worn on the right side
• Same features as 5060LH plus an additional outer pouch
• Holders for blade square, angle square, driver bits, and cat's paw
• 10 total pockets and tool holders
• Full-grain leather construction for durability
• Made in the USA

Occidental Leather 5062LH Applications

• Framing and rough carpentry fastener carry
• General carpentry tool and hardware organization
• Layout tasks requiring blade and angle squares
• Daily jobsite use where quick access to bits and small tools is needed

Occidental Leather 5062LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side of the body for left-handed use.
3. Load fasteners and tools into the four stacked compartments.
4. Use dedicated holders for squares, bits, and cat's paw.
5. Adjust placement for comfort and balanced carry.

Occidental Leather 5060LH Key Features

• Popular left handed leather fastener bag for pros
• Optimized for framing and general carpentry tasks
• Dedicated holders for 1 in blade square, angle square, cat paw, driver bits and more
• Left handed layout is worn on the right side for right hand access
• Durable leather construction with multiple pockets and tool holders

Occidental Leather 5060LH Applications

• Framing workflows needing fast access to nails and tools
• General carpentry organization on the jobsite
• Carrying blade and angle squares securely
• Right side wear for left handed builders

Occidental Leather 5060LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for left handed use.
3. Load fasteners and tools into main and outer pockets.
4. Secure squares and driver bits in designated holders.
5. Adjust belt fit and check balance before work.

Occidental Leather 9850LH Features

• Adjust-to-Fit belt allows seasonal clothing changes
• D-rings pre-installed for use with suspension systems
• Hand-specific tool holders for efficient workflow
• FatLip bag design with leather-reinforced corners and bottoms
• Left-handed layout (also available as 9850 for right-handed)

Occidental Leather 9850LH Applications

• Framing and general carpentry
• Production carpentry setups
• Jobsite tool organization and fastener storage
• Use with suspenders for heavy-load days

Occidental Leather 9850LH Installation Overview

1. Measure pant waist and set belt to the appropriate Adjust-to-Fit range.
2. Position left- and right-side bags for preferred reach.
3. Secure hammer holder and tool shield to belt as needed.
4. Load tools and fasteners; verify balance and comfort.
5. Attach suspenders to pre-installed D-rings if desired.

Occidental Leather 8062LH Features

• Popular OxyLights fastener bag for framing and general carpentry
• Left handed layout worn on the right side
• Holders for 1 inch blade square, angle square, cat's paw loop, driver bits
• Premium leather and industrial nylon construction
• Made in USA

Occidental Leather 8062LH Applications

• Framing tool and fastener organization
• General carpentry tasks
• Left handed jobsite setup worn on right side

Occidental Leather 8062LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Wear on the right side for left handed access.
3. Place squares, bits, and small tools into designated holders.
4. Load fasteners into the main and secondary pouches.
5. Check balance and adjust position for comfort.

Occidental Leather 9525LH SM Key Features

• Left-handed layout to optimize workflow
• Round-bottom, full-capacity bags with two-ply foam core maintain shape
• Padded 3 in nylon belt with leather tongue and steel roller buckle
• Includes Oxy Tool Shield for sharp tool protection
• 25 pockets and tool holders; compact, lightweight system
• Leather and industrial nylon construction; Made in USA

Applications

• Trim carpentry and finish work
• Light framing tasks
• Cabinetry and interior trim installation
• Punch list and detail work in tight spaces

Installation Overview

1. Put on the belt over typical work clothing where you will wear it.
2. Select the hole that gives a secure, comfortable fit.
3. Arrange tool bag on dominant side for left-hand use and fastener bag opposite.
4. Seat pouches and holders; add the Oxy Tool Shield where desired.
5. Load tools and adjust for balance and access.

Occidental Leather 8583LH Features

• 10 inch deep main bag with full leather boot
• Leather FatLip mouth keeps bag formed, open, and abrasion resistant
• Patented 2 in 1 outer bag with built in angle square holster
• Tri square sleeve, cats paw loop, and external pouches for nail sets or driver bits
• Left handed layout worn on the right side
• Made in USA

Occidental Leather 8583LH Applications

• Framing and carpentry fastener organization
• Drywall installation tool and bit storage
• General construction fastener and small tool management

Occidental Leather 8583LH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side for left handed use.
3. Load fasteners and tools into designated pockets.
4. Confirm the FatLip mouth and compartments are clear for access.

Occidental Leather 8585LH LG Key Features

• 25 pockets and tool holders
• Hand specific tool holder layout for left handed users
• Padded two ply bags hold shape
• Industrial nylon with leather reinforcements for abrasion resistance
• Full leather boot and FatLip leather mouth
• Made in USA

Occidental Leather 8585LH LG Applications

• Framing and general carpentry
• Production carpentry tool organization
• Fastener and small tool storage on the jobsite
• Left handed belt system setups

Occidental Leather 8585LH LG Installation Overview

1. Measure an existing belt from buckle to the hole used to determine belt size.
2. Wear the belt over normal work clothing and confirm fit.
3. Attach tool bags and holders to the belt in a left handed layout.
4. Distribute tools and fasteners and adjust for comfort and balance.
5. Check all rivets and loops before use.

Occidental Leather 8089LH XXL Key Features

• 22 pockets and tool holders
• Hand specific tool layout with NoSpill leather holders
• Padded two ply bags maintain shape
• Industrial nylon with leather reinforcements
• Made in USA

Occidental Leather 8089LH XXL Applications

• Framing and general carpentry tool carry
• Fastener and small part organization on the jobsite
• Left handed workflow optimization
• Daily professional construction use

Occidental Leather 8089LH XXL Installation Overview

1. Size the belt to your work clothing and buckle at the midpoint hole.
2. Attach tool and fastener bags in the left handed layout.
3. Secure the hammer holder and any clip on accessories.
4. Load tools and fasteners into designated pockets.
5. Adjust fit for comfort and balance before use.

Occidental Leather 8089LH M Features

• 22 pockets and tool holders for high-capacity carry
• Hand-specific tool layout for efficient workflow
• Padded two ply bags hold their shape
• Abrasion resistant industrial nylon with leather reinforcements
• NoSpill leather holders and OxyRed reinforced stress points
• Made in USA

Occidental Leather 8089LH M Applications

• Framing and rough carpentry tool organization
• General construction and jobsite carry
• Layout, measuring, and fastening tasks
• Left-handed workflow setups

Occidental Leather 8089LH M Installation Overview

1. Measure and select proper belt size; position over typical workwear.
2. Attach tool and fastener bags to the belt in left-handed layout.
3. Secure hammer holder and adjust pouch spacing for balance.
4. Tighten belt to a comfortable fit; verify free access to tools.
5. Load tools and perform a final comfort and security check.

Occidental Leather 8089LH LG Features

• 22 pockets and tool holders
• Hand specific NoSpill leather holders for secure access
• Padded two ply tool bags hold their shape
• Extremely abrasion resistant industrial nylon construction
• Leather tool holders with leather reinforced corners
• Made in USA

Occidental Leather 8089LH LG Applications

• Framing and rough carpentry
• General carpentry tool organization on the jobsite
• Left handed tool layout for efficient workflow
• Residential and light commercial construction
• Daily use by professional builders seeking lightweight durability

Occidental Leather 8089LH LG Installation Overview

1. Measure and size the belt to your work clothing.
2. Position the fastener and tool bags for a left handed layout.
3. Secure the hammer holder and accessories on the belt.
4. Load tools and fasteners; adjust pouch positions for balance.
5. Check fit and tighten belt for a secure, comfortable carry.

Occidental Leather 8080DBLH XXXL Key Features

• 20 pockets and tool holders
• Hand-specific tool holder layout for efficiency
• Padded two-ply nylon bags hold their shape
• Industrial nylon resists abrasion
• Leather tool holders with reinforced corners
• Made in USA

Occidental Leather 8080DBLH XXXL Applications

• Framing tasks requiring fast access to tools and fasteners
• General carpentry and jobsite setup
• Organized carry for hammers, tape, squares, and hand tools
• Left-handed workflows needing mirrored pouch placement

Occidental Leather 8080DBLH XXXL Installation Overview

1. Measure your existing tool belt from buckle end to used hole to confirm XXXL sizing.
2. Attach tool and fastener bags to the belt in left-handed orientation.
3. Secure hammer holder at rear center; adjust position for reach.
4. Load tools and fasteners; balance weight across both sides.
5. Check fit and tighten belt for comfortable, secure carry.

Key Features

• Left-handed configuration for optimal workflow
• Premium top-grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivet reinforcement at main bags
• NoSpill tool holder system for secure storage
• 23 pockets and tool holders for high capacity
• Made in the USA

Applications

• Framing and rough carpentry tool organization
• Jobsite fastener carrying and access
• Daily professional construction use
• Left-handed builders needing a hand-specific layout

Installation Overview

1. Measure and confirm XL belt sizing per your work clothing.
2. Slide tool and fastener bags onto the belt in left-handed layout.
3. Attach hammer holder at rear center position.
4. Buckle belt and adjust for a secure, comfortable fit.
5. Load tools and verify balanced weight distribution.

Occidental Leather 5089LH SM Features

• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• NoSpill tool holder system
• Copper rivets reinforce main bags
• 23 pockets and tool holders
• Function engineered for modern framers
• Made in USA

Occidental Leather 5089LH SM Applications

• Framing: organize fasteners and core tools for efficient workflow
• General carpentry: carry hand tools, square, and measuring gear
• Jobsite setup: high capacity pouch system for daily tasks
• Left-handed layout: tool bag on left, fasteners on right

Occidental Leather 5089LH SM Installation Overview

1. Measure your current tool belt from buckle end to the hole used to determine size.
2. Place belt over typical work clothing and adjust to midpoint hole.
3. Attach tool and fastener bags in the left-handed configuration.
4. Load tools and fasteners into dedicated NoSpill holders.
5. Verify comfort and balance; fine tune pouch positions.

Occidental Leather 8585LH XL Features

• FatLip leather mouth holds shape and resists wear
• Full leather boot base with rugged nylon exterior
• Hand specific tool layout for left handed users
• Padded two ply bags maintain structure loaded or empty
• 3 inch HD Ranger belt with center back 2-in-1 holder
• 25 pockets and tool holders
• Made in USA

Occidental Leather 8585LH XL Applications

• Framing and production carpentry tool organization
• Jobsite carry for fasteners, hand tools, and layout gear
• Left handed workflow with hand specific pouch placement
• General construction where durable tool storage is needed

Occidental Leather 8585LH XL Installation Overview

1. Measure to select proper belt size and fit at mid hole.
2. Attach tool and fastener bags to the belt in left hand layout.
3. Secure the 2-in-1 holder at center back and tighten belt.
4. Load tools and fasteners; verify balance and access.
5. Inspect stitching and hardware before use.

Occidental Leather 8089LH XL Features

• 22 pockets and tool holders
• Hand-specific tool layout with NoSpill leather holders
• Padded two-ply bags hold their shape
• Abrasion-resistant industrial nylon with leather reinforcement
• Left-handed setup; Made in USA

Occidental Leather 8089LH XL Applications

• Framing and rough carpentry tool organization
• Jobsite fastener and hand tool carry
• Left-handed tool belt setup for carpenters
• General construction and remodeling

Occidental Leather 8089LH XL Installation Overview

1. Size the HD Ranger belt to your work clothing and secure the buckle.
2. Position fastener and tool bags on preferred sides for left-hand layout.
3. Attach the hammer holder at center rear.
4. Load tools and fasteners into hand-specific pockets.
5. Check balance and tighten belt for a secure, comfortable fit.