Holiday Gift Guide 2021

Occidental Leather B5060 Features

• Three pouch stacked layout for fastener organization
• Dedicated holders for 1 inch blade square, angle square, cats paw loop, and driver bits
• Premium leather construction for long term durability
• Recommended for framing and general carpentry
• Left hand option available as 5060LH

Occidental Leather B5060 Applications

• Framing tasks requiring quick access to nails and layout tools
• General carpentry fastener and tool organization
• Jobsite setup where squares, bits, and pry tools need dedicated storage

Occidental Leather B5060 Installation Overview

1. Thread the bag onto a compatible work belt.
2. Choose side based on hand preference and workflow.
3. Load fasteners into main and outer pouches.
4. Place layout tools and bits into the dedicated holders.
5. Check balance and adjust position on belt for comfort.

Occidental Leather 5589 Key Features

• All leather commercial grade electricians case
• 25 pockets and holders for comprehensive tool organization
• Heavy duty electrical tape chain and metal utility clip
• Right side wear layout for right handed users
• Black leather tool holders with reinforced stitching
• Made in USA

Occidental Leather 5589 Applications

• Commercial and residential electrical work
• Organizing and carrying pliers, strippers, screwdrivers, and meters
• Quick access to electrical tape, markers, and small tools

Occidental Leather 5589 Installation Overview

1. Thread the pouch onto a compatible work belt.
2. Position on the right side for right handed workflow.
3. Load frequently used tools into front holders; place bulk items in the main bag.
4. Attach electrical tape to the chain and clip small items to the utility clip.
5. Adjust placement on belt for comfort and balance.

Occidental Leather 5018DBLH Key Features

• Double outer bag design for organized storage
• Holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Integrated tape holster fits tapes up to 35 ft
• Left handed layout worn on the left side
• Premium leather construction

Occidental Leather 5018DBLH Applications

• Daily carry of hand tools on the jobsite
• Framing and carpentry tool organization
• Finish work where quick access to small tools is needed
• Measuring and marking with onboard tape and pencil holders

Occidental Leather 5018DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Secure the tape measure in the holster.
4. Load essential tools into designated pockets and holders.
5. Confirm balanced weight and comfortable reach before use.

Occidental Leather 8584 Key Features

• 10 in deep main pouch with structured FatLip leather mouth
• Full leather boot for rugged longevity
• 13 pockets and tool holders for everyday layout tools
• Right-side layout; left-hand version available as 8584LH
• Made in the USA

Occidental Leather 8584 Applications

• Organizing and carrying hand tools on a tool belt
• Framing and general carpentry tasks
• Remodeling and jobsite maintenance work
• Right-hand dominant tool layouts

Occidental Leather 8584 Installation Overview

1. Slide the bag onto a compatible work belt through the leather belt slot.
2. Position on the right side for right-hand use (or choose 8584LH for left-hand use).
3. Load tools by category into interior and exterior holders.
4. Secure any clips or add-on holders as needed and check balance.

Occidental Leather 8583LH Features

• 10 inch deep main bag with full leather boot
• Leather FatLip mouth keeps bag formed, open, and abrasion resistant
• Patented 2 in 1 outer bag with built in angle square holster
• Tri square sleeve, cats paw loop, and external pouches for nail sets or driver bits
• Left handed layout worn on the right side
• Made in USA

Occidental Leather 8583LH Applications

• Framing and carpentry fastener organization
• Drywall installation tool and bit storage
• General construction fastener and small tool management

Occidental Leather 8583LH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side for left handed use.
3. Load fasteners and tools into designated pockets.
4. Confirm the FatLip mouth and compartments are clear for access.

Occidental Leather 5061 Key Features

• All leather construction built for daily jobsite durability
• Top tape pocket for quick access
• Nine total pockets and holders for fasteners and layout tools
• Two lower bags to sort small tools and nails
• Tool slots for angle square, cat's paw, driver bits, and more
• Available in right- or left-hand setups
• Made in the USA

Occidental Leather 5061 Applications

• Framing and general carpentry layouts
• Finish work where organized fastener access is needed
• Jobsite fastener and small tool organization on a tool belt

Occidental Leather 5061 Specifications

Occidental Leather 5061LH Key Features

• Left handed layout with tape holster positioned on the left; worn on the right side
• All-leather construction for daily jobsite durability
• 9 total pockets and holders for fasteners and layout tools
• Dedicated slots for angle square, cat's paw, driver bits, and more
• Made in the USA

Occidental Leather 5061LH Applications

• Framing and rough carpentry setups
• Finish carpentry and trim work
• General construction and remodeling

Occidental Leather 5061LH Installation Overview

1. Thread the pouch onto a compatible work belt.
2. Wear on the right side for left handed setups.
3. Load fasteners and tools into the main, outer, and small holders.
4. Position tape in the upper tape pocket for quick access.
5. Adjust placement on the belt for comfort and reach.

Occidental Leather 5018 Key Features

• Right-hand layout with holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Integrated tape measure holster fits tapes up to 35 ft
• Durable full-grain leather construction
• Two main pouches for fast access and organization
• Available in a left-hand version (5018DBLH / 5018LH)

Occidental Leather 5018 Applications

• Carpentry and framing tool carry
• Finish work and trim installation
• General construction and remodeling
• Measuring, marking, and layout tasks
• Jobsite tool organization on a work belt

Occidental Leather 5018 Installation Overview

1. Thread the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into designated holders and pouches.
4. Place tape in the built-in holster.
5. Verify balance and adjust placement for comfort.

Occidental Leather B5018DB Key Features

• Right-side layout for tools most accessed with the right hand
• Integrated tape holster fits up to 35 ft tape
• Double outer bags for added organization
• Durable all-leather construction with reinforced stitching
• Made in the USA

Occidental Leather B5018DB Applications

• Daily carry of carpentry and framing hand tools
• Finish and trim work tool organization
• General construction and remodeling
• Measuring and layout tasks on site

Occidental Leather B5018DB Installation Overview

1. Slide the pouch onto your work belt.
2. Position on the right side for dominant-hand access.
3. Load tools into main and outer pockets; place tape in the holster.
4. Adjust belt for comfort and secure fit before use.

Occidental Leather 5060 Key Features

• Three stacked pouches for fasteners and small tools
• 9 pockets and holders including slots for 1 in blade square, angle square, cat's paw loop, and driver bits
• Premium durable leather construction
• Works with up to 3 in work belts
• Made in the USA

Occidental Leather 5060 Applications

• Framing tasks
• General carpentry
• Layout and fastening tool organization
• Left or right side fastener carry on tool belts

Occidental Leather 5060 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Select left or right side placement to match your dominant hand.
3. Load fasteners and layout tools into the three pouches.
4. Adjust position on the belt for comfort and balance.
5. Secure any tool holders and confirm access to frequently used items.

Occidental Leather 5018DB Features

• 11 total pockets and tool holders for efficient organization
• Integrated tape holster fits tapes up to a 35 ft FatMax
• Hammer loop for quick access
• Premium leather construction, made in USA
• Right-side wear for dominant hand access; left-hand version available

Occidental Leather 5018DB Applications

• General carpentry and framing tool organization
• Finish work where frequent tool access is required
• Jobsite carry for measuring, marking, and cutting tools

Occidental Leather 5018DB Installation Overview

1. Slide the pouch onto a compatible work belt.
2. Position on the right side for dominant hand access.
3. Secure the tape, hammer, and hand tools in designated holders.
4. Confirm balance and adjust placement for comfort.

Occidental Leather 8062LH Features

• Popular OxyLights fastener bag for framing and general carpentry
• Left handed layout worn on the right side
• Holders for 1 inch blade square, angle square, cat's paw loop, driver bits
• Premium leather and industrial nylon construction
• Made in USA

Occidental Leather 8062LH Applications

• Framing tool and fastener organization
• General carpentry tasks
• Left handed jobsite setup worn on right side

Occidental Leather 8062LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Wear on the right side for left handed access.
3. Place squares, bits, and small tools into designated holders.
4. Load fasteners into the main and secondary pouches.
5. Check balance and adjust position for comfort.

Occidental Leather 5017DB Key Features

• Most popular layout without a tape pocket
• Double outer bags for added organization
• Holders for hammer, pencils, knife, crayon, chisel, torpedo level
• Right side wear for tools accessed with the right hand
• Available in left hand version as 5017DBLH
• Made in USA

Occidental Leather 5017DB Applications

• Organizing core hand tools on the jobsite
• Framing and general carpentry work
• Remodeling and installation tasks
• Trim and finish carpentry tool carry
• Daily use on professional work belts

Occidental Leather 5017DB Installation Overview

1. Slide the bag onto a work belt up to 3 inches wide.
2. Position on the right side for right hand access.
3. Load tools into main and outer pockets and holders.
4. Adjust placement for balance and comfort.
5. Securely fasten belt and verify easy access to tools.

Occidental Leather B8064 Features

• Patented 2-in-1 outer pouch with angle square holster
• Tri-square sleeve, cat's paw loop, nail set and driver bit pouches
• Four-bag layout for layered storage
• Holds fasteners and tools commonly accessed with the left hand
• Made in USA

Occidental Leather B8064 Applications

• Framing: Keep nails, square, and layout tools organized
• General carpentry: Quick access to bits, nail sets, and cat's paw
• Layout work: Integrated angle square holster for fast measurement
• Jobsite organization: Layered pouches separate fasteners and small tools

Occidental Leather B8064 Installation Overview

1. Select right- or left-handed variant to match your setup.
2. Slide the bag onto a compatible work belt and secure.
3. Position fastener bag on the left side for right-handed users; right side for left-handed users.
4. Load fasteners and layout tools into the designated sleeves and pouches.
5. Verify comfortable reach and adjust placement as needed.

Occidental Leather 8062 Features

• 4 pouch layout with main, middle, outer, and upper bags
• 10 total pockets and tool holders
• Dedicated holders for blade square, angle square, cat's paw, and driver bits
• Streamlined profile for compact, efficient storage
• Designed to be worn on the left side for right handed users; left handed option available
• Made in USA

Occidental Leather 8062 Applications

• Framing tasks requiring quick access to fasteners and layout tools
• General carpentry where compact, organized storage is preferred
• Keeping squares, bits, and cat's paw readily accessible on the non dominant side

Key Features

• Popular 3 pouch pro layout without a tape pocket
• Double outer bags for added capacity and organization
• Tool holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Left handed configuration; worn on the left side
• Made in the USA

Applications

• Carpentry and framing tool organization
• General construction and remodeling
• Finish work tool carry
• Jobsite hand tool access and storage

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Load tools into dedicated holders and pouches.
4. Check balance and tighten belt for a secure fit.

Occidental Leather 5017 Features

• Popular two pouch layout without extra outer pouch and tape pocket
• Dedicated holders for pencils, work knife, lumber crayon, chisel, torpedo level, and hammer
• Right side wear for quick right hand access
• Hammer loop included
• Made in USA leather construction

Occidental Leather 5017 Applications

• Framing and general carpentry tool carry
• Trim and light finish work organization
• Daily-use tool access on the right side of the belt
• Hammer and small hand tool holstering

Occidental Leather 5017 Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side for right hand access.
3. Load essential tools into the main and outer bags.
4. Place hammer in the loop and secure small items in dedicated holders.
5. Adjust placement for comfort and balance.

Occidental Leather B8064LH Key Features

• Patented 2-in-1 outer pouch with built-in angle square holster
• Four-bag layout: main, outer, upper, and 2-in-1 pouch
• Dedicated holders for tri-square, cat's paw, nail sets, and driver bits
• Left-handed configuration; worn on right side
• Industrial nylon with leather reinforcements; Made in USA

Occidental Leather B8064LH Applications

• Framing and general carpentry fastener storage
• Organizing layout tools such as angle and tri-squares
• Jobsite carry for nail sets, driver bits, and pry tools
• Left-handed belt setups worn on the right hip

Occidental Leather B8064LH Installation Overview

1. Orient the pouch for right-side wear for left-handed users.
2. Thread onto your work belt and position for comfortable reach.
3. Secure adjacent holders as needed and load tools by category.
4. Confirm clear access to the 2-in-1 outer pouch and square holster.

Occidental Leather B8018DB Key Features

• Most popular OxyLights tool bag
• Integrated tape holder fits up to 35 ft FatMax
• Tool-specific holders plus hammer loop for fast access
• Right-side orientation; not offered in left-hand model
• Durable leather and nylon construction

Occidental Leather B8018DB Applications

• Everyday carry of layout and cutting tools
• Framing and finish tasks requiring fast access to hand tools
• Jobsite organization with right-hand dominant layouts
• Tape, level, and marking tool storage on belt systems

Occidental Leather B8018DB Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into the dedicated holders and main pockets.
4. Place a tape measure in the leather holder; verify secure fit.
5. Check balance and adjust belt for comfortable carry.

Occidental Leather 8060 Features

• 3-pouch layout for fasteners and small tools
• Tool-specific holders for blade square, angle square, cat's paw, and bits
• Lightweight OxyLights construction with leather reinforcements
• Optimized for framing and general carpentry
• Made in USA

Occidental Leather 8060 Applications

• Framing: Keep nails, layout square, and bits at hand
• General Carpentry: Organized storage for everyday fasteners
• Layout Work: Dedicated blade square and angle square holders
• Punch list tasks: Compact carry of small tools and hardware

Occidental Leather 8060 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right-handed setups or per preference.
3. Load fasteners and layout tools into the main, outer, and upper pouches.
4. Use dedicated holders for blade square, angle square, bits, and cat's paw.
5. Check balance and retention before starting work.

Occidental Leather 8018DBLH Features

• Left handed layout for wear on the left side
• Holders for pencils, utility knife, crayon, chisel, torpedo level, and hammer
• Tape holster fits up to a 35 ft FatMax
• Compact 3 pouch configuration with organized storage
• Lightweight OxyLights construction

Occidental Leather 8018DBLH Applications

• Daily tool organization for carpentry and framing tasks
• Measuring and layout work with quick tape access
• Punch list and trim installs requiring compact storage

Occidental Leather 8018DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Load tools into dedicated holders for secure carry.

Occidental Leather 8060LH Features

• 9 pockets and tool holders for organized storage
• Industrial nylon body with leather trim for durability
• Left handed layout, worn on right side
• Dedicated holders for blade square, angle square, cat's paw, driver bits
• Made in the USA

Occidental Leather 8060LH Applications

• Framing tasks requiring quick access to fasteners and layout tools
• General carpentry tool and fastener organization
• Left handed setups worn on the right side of the belt

Occidental Leather 8060LH Installation Overview

1. Thread the bag onto a compatible work belt.
2. Position on the right side for left handed use.
3. Load fasteners and tools into the designated pockets and holders.
4. Check access and balance before starting work.

Occidental Leather 8018DB Features

• Popular OxyLights configuration with right-hand layout
• Dedicated holders for common hand tools and tape up to 35 ft
• Main bag corners reinforced for durability
• Leather and industrial nylon construction
• Made in the USA

Occidental Leather 9085 Features

• Purpose-built tool organization in a compact case
• 18 pockets and tool holders for screwdrivers, chisels, bits, and more
• Leather-lined bottom enhances durability and shape retention
• Four rigid interior walls keep tools upright
• Includes 2 Oxy Tool Shields for sharp tool protection
• Made in the USA

Occidental Leather 9085 Applications

• Finish carpentry tool organization
• Plant engineering and maintenance kits
• On-the-go tool access for service professionals
• Upright storage for hand tools and accessories

Occidental Leather 9085 Installation Overview

1. Load tools into dedicated pockets and holders.
2. Place sharp tools in the included Oxy Tool Shields.
3. Attach the case securely to your work belt.
4. Arrange tools upright using interior dividers for quick access.