Holiday Gift Guide 2021

Occidental Leather 1550 Features

• 7 pockets & tool holders for organized storage
• Clip-on gear pockets for quick modular access
• Integrated glasses holder and a secure-closure pouch
• Lightweight design — only .83 lbs
• Made in the USA

Occidental Leather 1550 Applications

• Hands-free tool carry for carpentry, electrical, and general trades
• Organized access to small tools, fasteners, and accessories
• Belt-free setup for mobility on jobsites and in workshops

Occidental Leather 1550 Installation Overview

1. Wear the Insta-Vest and adjust straps for a secure, comfortable fit.
2. Attach clip-on gear pockets to the suspenders/vest positions as desired.
3. Load tools and accessories evenly across pockets and holders.
4. Secure flaps/closures and confirm clear range of motion before use.

Occidental Leather 2535 Features

• Freedom from tool clutter with 18 pockets & holders
• Ergonomically designed for even load distribution
• Can be worn with a tool belt; does not interfere with belts
• Fully adjustable straps for a custom fit
• Durable ballistic nylon with leather reinforcements
• One size fits most
• Made in the USA

Occidental Leather 2535 Applications

• General carpentry and framing tool organization
• Remodeling and punch-list work
• Electrical and low-voltage service calls
• Finish work where mobility and access are critical
• Jobsite tasks requiring hands-free fast access to tools

Occidental Leather 2535 Installation Overview

1. Loosen straps and put on the vest over work clothing.
2. Adjust shoulder and side straps until weight is balanced and secure.
3. Load tools into pockets and holders; place sharp tools in the included Pocket Shield.
4. Attach the clip-on hammer holder as needed.
5. Optionally wear with a tool belt; confirm vest does not impede belt movement.

Occidental Leather 5085 Key Features

• 8 oz. top-grain leather construction
• 17 pockets & tool holders for comprehensive organization
• Divided interior for separated, accessible storage
• Holster fits 35’ x 1" tape measure
• Quick-release tool snap and electrical tape strap
• Made in the USA

Occidental Leather 5085 Applications

• Organizing hand tools for engineering, field, and service work
• Electrical and maintenance tool storage
• Carpentry and jobsite measuring essentials

Occidental Leather 5526 Key Features

• Round-bottom leather construction adds volume and resists collapse
• 16 total pockets/tool holders for organized storage
• Torpedo level slot, pencil & chisel pockets, and bit holders
• Includes 2003 Oxy Tool Shield for knives, chisels, or cutters
• Right-hand layout; not available in a left-hand version
• Made in the USA

Occidental Leather 5526 Applications

• Framing and general carpentry tool carry
• Finish work and remodeling tasks
• Organizing fasteners and everyday jobsite tools
• Right-side pouch for professional work belts

Occidental Leather 5526 Installation Overview

1. Slide the pouch onto a compatible work belt.
2. Wear on the right side for proper layout.
3. Place the Oxy Tool Shield in its sleeve.
4. Load tools into main, outer, and dedicated holders.

Occidental Leather 5525 Key Features

• Round-bottom design adds structure and increases capacity
• 10 pockets & tool holders optimized for fasteners and layout tools
• Tape pocket holds tapes up to 35′
• Includes Oxy Tool Shield to protect sharp tools, bags, and body
• Right-hand layout; typically worn on the left side
• Made in the USA

Occidental Leather 5525 Applications

• Framing and general carpentry fastener carry
• Layout and measuring tools organization on the belt
• Jobsite tasks requiring frequent access to nails, screws, and bits
• Daily contractor use where durable leather storage is preferred

Occidental Leather 5525 Installation Overview

1. Thread the bag’s tunnel onto your work belt.
2. Position on the left side for right-handed use.
3. Load fasteners and layout tools into designated pockets/holders.
4. Place sharp tools in the included Oxy Tool Shield.
5. Check balance and adjust placement for comfortable reach.

Occidental Leather 5135 XXL Key Features

• Wide 5” belt provides enhanced back support
• Padded wool liner for moisture-wicking comfort
• 2” all-leather overbelt keeps tool bags from sliding
• Nickel-plated steel buckles and hardware
• Built-in suspender attachment loops
• Edge-stitched leather for added strength
• Made in the USA

Occidental Leather 5135 XXL Applications

• Securing and supporting tool bags on the job
• Carpentry and framing work requiring all-day wear
• Electrical and mechanical trades needing stable rig support
• General construction where comfort & load distribution matter

Occidental Leather 5135 XXL Installation Overview

1. Measure and select the correct belt size; fasten at the midpoint hole.
2. Thread tool bag loops onto the 2” overbelt and position as desired.
3. Buckle the belt snugly at working height over jobsite clothing.
4. Attach suspenders to the built-in loops if using for heavier loads.
5. Make final fit adjustments for comfort and balance.

Occidental Leather B5135 XL Features

• Wide 5″ belt for enhanced back support
• Thick padded wool liner for comfort and moisture management
• 2″ all–leather overbelt with loops to minimize bag sliding
• Nickel–plated steel buckles and hardware
• Suspender attachment loops
• Edge–stitched construction for strength and clean finish
• Made in the USA

Occidental Leather B5135 XL Applications

• Stabilizing and supporting tool bags for daily jobsite use
• Carpentry, framing, and finish work requiring extended wear
• Use with suspenders for balanced weight distribution
• General construction and remodeling tasks

Occidental Leather B5135 XL Installation Overview

1. Measure your existing tool belt from buckle to the hole used to confirm size.
2. Wear over typical work clothing and fasten at the midpoint hole.
3. Attach tool bags to the overbelt and secure through belt loops.
4. Clip compatible suspenders to the built–in loops if desired.

Key Features

• Wide 5″ belt for enhanced back support
• Suspender attachment loops
• Thick padded wool liner for comfort & moisture wicking
• Heavy-duty buckles & belt loops minimize bag sliding
• Edge-stitched leather for added strength
• Made in USA

Applications

• Supportive work belt for carrying tool bags on the jobsite
• Compatible with suspenders for heavier load distribution
• Comfort-focused rig for framing, carpentry, and general construction
• Moisture-wicking liner ideal for all-day wear in variable conditions

Installation Overview

1. Measure the belt you currently wear where you use it over work clothes.
2. Note the hole used to fasten; remove belt and lay flat.
3. Measure from the end of the buckle to the used hole to confirm size.
4. Buckle at the midpoint hole; adjust 4″ either direction for fit.
5. Attach suspenders to loops and secure tool bags to the overbelt.

Occidental Leather 5135 M Key Features

• Wide 5″ belt for enhanced back support
• Padded wool liner for moisture-wicking comfort
• 2″ all-leather overbelt minimizes bag sliding
• Nickel-plated steel buckles and built-in suspender loops
• Edge-stitched leather for added strength
• Made in USA

Occidental Leather 5135 M Applications

• Daily wear for tradespeople needing strong back support
• Securing tool bags for carpentry, framing, and finish work
• Use with suspenders to distribute heavy loads
• Jobsite environments requiring durable leather belts

Occidental Leather 5135 M Installation Overview

1. Put the belt on over your normal work clothes where you typically wear it.
2. Note the hole you use to fasten the buckle.
3. Remove the belt and measure from the end of the buckle to the used hole to determine belt size.
4. Select the size closest to your measurement; belts have 4″ adjustment each way.
5. Attach tool bags to the 2″ overbelt and connect suspenders to the loops if desired.

Key Features

• 5″ wide belt for enhanced back support
• Padded wool liner for moisture?wicking comfort
• 2″ all?leather overbelt helps prevent bag sliding
• Nickel?plated steel buckles & hardware
• Built?in suspender attachment loops
• Edge?stitched construction for strength and clean finish
• Made in the USA

Applications

• Daily use with carpenter and framer tool rigs
• General construction and remodeling setups
• Electrical, HVAC, and trim work where belt?mounted bags are used
• Jobs requiring suspender?compatible load distribution
• Comfort upgrade for heavy tool carry on site

Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to confirm Large (approx. 41″ midpoint).
2. Position the belt over work clothing and fasten at the midpoint hole for optimal adjustment.
3. Thread and secure tool bags onto the 2″ overbelt; tighten to minimize sliding.
4. Attach suspenders to the integrated loops if extra load support is needed.
5. Check fit and comfort; adjust buckle and overbelt tension as required.

Key Features

• Wide 5″ belt for enhanced back support
• Built‑in suspender attachment loops
• Thick padded wool liner for comfort & moisture wicking
• 2″ all‑leather overbelt with heavy duty loops to minimize bag sliding
• Nickel‑plated steel buckles
• Edge stitching on leather for added strength
• Made in USA

Applications

• Supportive base belt for carpenter and contractor tool rigs
• Comfort upgrade for long days carrying loaded tool bags
• Secure attachment of fastener & tool bags with overbelt
• Compatible with suspenders for improved load distribution
• General construction, framing, finish work

Installation Overview

1. Measure your current tool belt from buckle end to the hole used to determine size.
2. Select the Large size and adjust to midpoint hole for optimal fit.
3. Attach tool bags to the 2″ overbelt and position loops to prevent sliding.
4. Fasten the nickel‑plated buckle and check suspender loop placement.
5. Confirm comfortable fit over typical work clothing.

Key Features

• 5" wide belt for enhanced lumbar support
• Padded wool liner for comfort & moisture wicking
• 2" all-leather overbelt minimizes bag movement
• Nickel-plated steel buckles & hardware
• Built-in suspender attachment loops
• Edge-stitched construction
• Made in the USA

Applications

• Daily tool carry for construction and trades
• Carpentry and framing rigs needing strong back support
• Electrical, plumbing, and finish work with multiple pouches
• Use with suspenders for balanced load distribution

Installation Overview

1. Confirm XXL sizing using the belt-size guide.
2. Thread tool bags onto the 2" overbelt and position.
3. Buckle the belt where you normally wear it and tighten.
4. Attach compatible suspenders to the built-in loops if desired.
5. Adjust using the strap holes for a secure, comfortable fit.

Occidental Leather 5135 SM Features

• Wide 5" belt for enhanced lower?back support
• Thick padded wool liner for comfort and moisture wicking
• 2" all?leather overbelt keeps tool bags locked in place
• Nickel?plated steel buckles and robust belt loops minimize bag sliding
• Edge?stitched leather for added strength and clean finish
• Suspender attachment loops integrated
• Made in the USA

Occidental Leather 5135 SM Applications

• Daily tool carry for carpenters, framers, and general trades
• Jobs requiring strong back support and secure bag retention
• Use with suspenders for heavier loadouts

Occidental Leather 5135 SM Installation Overview

1. Measure a belt you wear at work from buckle end to the hole used; match size.
2. Wear over typical work layers and fasten near the midpoint hole for adjustability.
3. Attach tool bags to the 2" overbelt and position as preferred.
4. Clip suspenders to built?in loops if added support is needed.

Key Features

• Wide 5” belt for enhanced back support
• Padded wool liner for moisture-wicking comfort
• 2” all-leather overbelt secures tool bags
• Heavy-duty, nickel-plated steel buckles and hardware
• Built-in suspender attachment loops
• Edge-stitched leather for strength and clean finish
• Made in the USA

Applications

• Jobsite tool carry with improved back support
• Secure attachment of tool bags for carpentry and trades
• Comfortable wear for long shifts with moisture control
• Use with suspenders for balanced load distribution

Installation Overview

1. Measure your current tool belt per sizing guide to confirm Small.
2. Buckle the belt at your typical working position over clothing.
3. Thread and tighten the 2” overbelt to lock tool bags in place.
4. Attach compatible suspenders to the built-in loops if needed.
5. Adjust for comfort and verify secure fit before use.

Occidental Leather B5055 Key Features

• Even load distribution to relieve hip and lower?back strain
• Padded, contoured yoke with Dri?Lex® lining for sweat management
• Adjustable chest strap for quick on/off and secure fit
• Tool?friendly chest pockets for pencils and clip?on items
• Heavy?duty center D?ring for hanging up the entire rig
• One?size?fits?most standard; small size available separately
• Made in the USA

Applications

• Support and balance heavy tool belts during all?day wear
• Reduce lower?back and hip fatigue on framing, finish, and trim work
• Keep shoulder straps positioned securely while moving on the jobsite
• Hang full rig when not in use via integrated D?ring

Installation Overview

1. Attach suspender clips/straps to your compatible tool belt or system.
2. Place the padded yoke over shoulders; center the yoke on your back.
3. Adjust front and side straps for even weight distribution.
4. Buckle and fine?tune the chest strap to keep straps in place.
5. Verify comfortable range of motion; re?adjust as needed.

Occidental Leather 5055 Key Features

• Even weight distribution to relieve hips & lower back
• Contoured, padded yoke lined with Dri?Lex® for moisture management
• Adjustable chest strap for quick on?off and secure fit
• Tool?friendly chest pockets on both sides
• Heavy?duty center D?ring for hanging the rig (not for safety use)
• Leather loop attachment system fits up to 3″ work belts
• Available in OxyRed or OxyBlack; Standard & Small sizes
• Made in USA

Occidental Leather 5055 Applications

• Support heavy tool belts with balanced weight distribution
• Increase jobsite comfort during framing, carpentry, and finish work
• Stabilize tool rig to keep straps in place while moving
• Hang up complete rig between tasks using center D?ring

Occidental Leather 5055 Installation Overview

1. Attach the included leather loops to your tool belt (up to 3″ wide).
2. Connect the suspender straps to the belt loops and adjust length.
3. Position the padded yoke centered on shoulders for comfort.
4. Secure the adjustable chest strap; confirm straps stay in place.
5. Use the center D?ring to hang the rig when not in use (do not use for safety).

Occidental Leather B5611 Features

• All?leather construction with classic black finish
• Side?by?side 35' tape holster plus angle square holster
• Upper bag with external sleeve pockets and drill bit holsters
• Integrated Oxy Tool Shield for sharp tools
• Reinforced back wall at stress points for long service life
• 10 total pockets/tool holders
• Made in the USA

Occidental Leather B5611 Applications

• Framing and carpentry fastener and tool carry
• Organizing tape, angle square, bits, and small hand tools
• General construction and remodel jobsite storage
• Left?side wear for right?handed workflows

Occidental Leather B5611 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right?hand access.
3. Load fasteners and tools into designated pockets/holsters.
4. Secure tape and angle square in their holsters; place sharp tools in the Oxy Tool Shield.

Occidental Leather 5062 Key Features

• 4-pouch stacked layout for expanded capacity
• 10 pockets and tool holders sized for fasteners and layout gear
• Dedicated slots for 1" blade square, angle square, driver bits, and cat’s paw
• Full-grain leather construction for durability
• Designed to be worn on the non-dominant side
• Made in the USA

Occidental Leather 5062 Applications

• Framing and general carpentry fastener storage
• Organizing layout tools and driver bits on belt
• Daily jobsite use where rugged leather pouches are preferred

Occidental Leather 5062 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the non-dominant side for balanced access.
3. Load fasteners and tools into the designated pockets and holders.
4. Check that the pouch is secure and pockets are seated before work.

Occidental Leather 5062LH Key Features

• 4-pouch stacked layout for expanded capacity
• 10 pockets & tool holders for fasteners and layout gear
• Left-handed orientation — worn on the right side
• Tool-specific slots for blade square, driver bits, cat’s paw, and angle square
• Full-grain leather construction for long-term durability
• Made in the USA

Occidental Leather 5062LH Applications

• Framing: Carry nails, cat’s paw, and layout squares
• General carpentry: Organize driver bits, nail sets, and fasteners
• Layout work: Store 1" blade square and angle square
• Jobsite setup: High-capacity pouch for daily tool access

Occidental Leather 5062LH Installation Overview

1. Select right side of body for left-handed orientation.
2. Slide the pouch onto a compatible work belt.
3. Secure positioning and balance with other bags.
4. Load fasteners and tools into dedicated pockets.
5. Verify comfortable access before use.

Key Features

• FatLip™ leather mouth keeps the bag open and protects against wear
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Dedicated storage for cat’s paw, tri-square, driver bits, and nail sets
• Left-handed layout — worn on the right side of the body
• Made in the USA

Applications

• Framing — fast access to nails and layout tools
• Drywall installation — organized storage for bits and fasteners
• General construction — durable pouch for daily jobsite tasks

Installation Overview

1. Wear on the right side for left-handed users.
2. Pair with your primary tool bag on the left side.
3. Load fasteners and frequently used layout tools into dedicated pockets.
4. Confirm comfortable position on your work belt before use.

Occidental Leather 5061 Features

• All-leather construction for daily jobsite durability
• 9 pockets and holders arranged for efficient fastener and tool access
• Left-side tape holster in place of an upper bag
• Holds angle square, cat’s paw, driver bits, and more
• Available in right-hand (5061) and left-hand (5061LH) layouts
• Made in the USA

Occidental Leather 5061 Applications

• Framing and rough carpentry layouts
• Finish carpentry fastener organization
• General carpentry and remodel tool storage

Occidental Leather 5061 Installation Overview

1. Select right-hand (5061) or left-hand (5061LH) orientation to match your setup.
2. Slide the pouch onto your work belt through the built-in leather tunnel.
3. Position on the left side for fastener access opposite your primary tool bag.
4. Load tape, fasteners, and layout tools into dedicated pockets.
5. Adjust belt position for comfortable reach before starting work.

Occidental Leather 5060LH Features

• Left-handed fastener bag designed to be worn on the right side
• Three-pouch layout with top-access tier for efficient fastener storage
• Holders for 1" blade square, angle square, cat’s paw, driver bits & more
• Premium durable leather construction
• Made in the USA

Occidental Leather 5060LH Applications

• Framing — organized storage for nails and layout tools
• General carpentry — quick access to squares, bits, and fasteners

Occidental Leather 5060LH Installation Overview

1. Thread the bag onto a compatible work belt.
2. For left-handed users, position the fastener bag on the right side.
3. Load primary tools and fasteners into the three stacked pouches.
4. Place layout tools in the dedicated holders (square, bits, cat’s paw).
5. Check balance and adjust placement for comfortable access.

Occidental Leather 5018 Key Features

• Tool bag layout optimized for right-hand access
• Dedicated holders for pencils, knife, lumber crayon, chisel, torpedo level, and hammer
• Holster fits tape measures up to 35″
• Available in a left-hand version (5018DBLH)

Occidental Leather 5018 Applications

• Daily professional carpentry tool carry
• Framing and layout tasks
• Finish work and trim installation
• General construction tool organization

Occidental Leather 5018 Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side for dominant-hand access.
3. Load tools into designated pockets and holders.
4. Seat your tape measure in the holster.
5. Verify balance and adjust placement as needed.

Occidental Leather 8584 Features

• 10" deep main bag with structured full leather boot
• FatLip leather-reinforced mouth holds shape & resists abrasion
• 13 pockets & tool holders for organized storage
• Right-side layout; left-hand version available as 8584LH
• Made in the USA

Occidental Leather 8584 Applications

• Framing and carpentry hand tool organization
• Daily jobsite access on dominant-hand side
• General construction and remodeling tool carry

Occidental Leather 8584 Installation Overview

1. Slide the bag onto a compatible work belt via the leather tunnel.
2. Place on your dominant-hand side (right for 8584; left for 8584LH).
3. Load tools into interior leather sleeves and exterior pockets.
4. Secure hammer and accessories in designated holders.

Occidental Leather B5018DB Key Features

• Double outer bags for fastener & small tool access
• Dedicated holders for pencils, work knife, crayon, chisel, torpedo level & hammer
• Tape measure holster fits up to a 35’ FatMax
• Right-side wear for dominant-hand tool access
• Premium leather construction; Made in USA

Occidental Leather B5018DB Applications

• Carpentry tool organization and quick access
• Framing & general construction layouts
• Measuring & marking with integrated tape & crayon holders
• Everyday jobsite carry on a work belt

Occidental Leather B5018DB Installation Overview

1. Slide the bag onto a compatible work belt (up to 3″ width).
2. Position on the right side for dominant-hand tool access.
3. Load tools into the main and outer pouches; use holders for layout tools.
4. Secure tape measure in the holster; check balance and comfort.

Key Features

• 10 in. deep main bag for high-capacity storage
• Leather FatLip mouth keeps the bag formed, open, and protected against abrasion
• Full leather boot reinforces the base for rugged jobsite durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Dedicated sleeves/loops for tri-square, cat’s paw, nail sets or driver bits
• Pockets and tool holders: 10
• Made in the USA

Applications

• Organizing and carrying nails, screws, and small fasteners
• Quick access to angle square, driver bits, and layout tools
• Framing, drywall, and general construction tasks

Occidental Leather B5060LH Features

• Left-handed layout worn on the right side
• Three stacked pouch design with top-access tier
• 9 pockets & tool holders for efficient organization
• Dedicated holders for 1" blade square, angle square, driver bits, and cat’s paw
• Premium, reinforced leather construction
• Made in USA

Occidental Leather B5060LH Applications

• Framing tasks needing quick fastener access
• General carpentry tool and fastener organization
• Layout work with squares and driver bits
• Optimized carry for left-handed workflows

Occidental Leather 8581 Features

• FatLip™ leather mouth keeps the bag formed, open, and protected
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Tri-square sleeve, cat’s paw loop, and external nail set/driver bit pouches
• 10 pockets & tool holders for efficient organization
• Designed to be worn on the non-dominant side for fastener access
• Made in the USA

Occidental Leather 8581 Applications

• Framing: Keep nails, angle square, and layout tools at hand
• Drywall installation: Store fasteners and driver bits for quick access
• General construction: Organize common hand tools and fasteners
• Remodeling: Versatile pouch setup for mixed trades

Occidental Leather 8581 Installation Overview

1. Thread the bag onto a compatible 3″ work belt.
2. Position on the non-dominant side for fastener access.
3. Load tools and fasteners into main, outer, and upper pockets.
4. Seat the angle square in the integrated holster; place tri-square and cat’s paw in their sleeves.
5. Verify comfortable reach and balance before use.

Key Features

• 10" deep main pouch for high capacity
• FatLip leather-reinforced mouth stays open and resists wear
• Full leather boot adds structure and durability
• 13 pockets & tool holders for organized access
• Right-hand layout; worn on the right side
• Made in the USA

Applications

• Daily carry of hand tools such as hammer, knife, pencils, and chisels
• Carpentry/framing setups on the dominant-hand side
• General construction and remodeling tool organization

Occidental Leather 5589 Features

• All leather construction for durability
• 25 pockets and holders to organize electrician essentials
• Heavy-duty electrical tape chain and metal utility clip
• Designed specifically for journeyman electricians
• Black leather tool holders with reinforced stitching
• Right-hand wear layout; left-hand version available

Occidental Leather 5589 Applications

• Commercial and residential electrical work
• Daily organization and carry of electrician hand tools
• Belt-mounted access to screwdrivers, pliers, meters, and testers
• Handed layouts to match preferred workflow

Occidental Leather 5589 Installation Overview

1. Select right- or left-hand version.
2. Slide case onto work belt; position on dominant-hand side.
3. Load tools into dedicated pockets and sleeves.
4. Attach tape rolls to the chain and small items to the utility clip.
5. Check fit and comfort before use.

Occidental Leather 5018DBLH Key Features

• Left-handed layout — designed to be worn on the left side for dominant-hand access
• Double outer bags for added capacity and organization
• Built-in tape holster accepts tapes up to 35′ FatMax
• Hammer loop plus dedicated holders for pencils, knife, crayon, chisel, and torpedo level
• Premium leather construction; made in the USA

Occidental Leather 5018DBLH Applications

• Everyday tool carry for carpentry and framing tasks
• Jobsite measuring and layout with integrated tape holster
• Finish and trim work requiring quick access to small hand tools
• General construction where organized on-belt storage is needed

Occidental Leather 5018DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Wear on the left side for left-handed access.
3. Load primary tools into the main and outer pockets; place hammer in loop.
4. Seat tape measure in the built-in holster and secure.
5. Adjust tool placement for balance and comfort before use.

Occidental Leather B5060 Key Features

• Three-pouch fastener layout keeps hardware and small tools organized
• Holders for 1" blade square, angle square, cat’s paw, and driver bits
• Premium leather construction for long-term durability
• Highly recommended for framing and general carpentry
• Made in the USA

Occidental Leather B5060 Applications

• Framing: Carry nails, layout tools, and drivers within reach
• General Carpentry: Organized storage for fasteners and bits
• Belt-mounted storage for everyday jobsite tasks

Occidental Leather B5060 Installation Overview

1. Thread the bag onto a compatible work belt through the back slot.
2. Position on the side opposite your primary tool bag for balance.
3. Load fasteners and layout tools into the designated pouches and holders.
4. Adjust belt fit and verify clear access to tools before work.

Occidental Leather 5060 Features

• Three stacked pouches with top-access tier for efficient fastener storage
• 9 pockets and tool holders for layout tools and bits
• Dedicated holders fit cat’s paw, driver bits, angle square, and 1" blade square
• Premium, reinforced leather construction
• Available in left- or right-hand setups and multiple colors
• Made in the USA

Occidental Leather 5060 Applications

• Framing: Keep nails and layout tools at hand
• General carpentry: Organized storage for daily tools and fasteners
• Jobsite setup: Streamlined access to squares, bits, and cat’s paw

Occidental Leather 5060 Specifications

Occidental Leather 5564 Key Features

• Hybrid build: leather main bag with dual-compartment industrial nylon outer pouch
• Four total pouches for fasteners and small parts
• Six black leather tool holders for bits, cat’s paw, and layout tools
• Left-side wear for fastener access with the non-dominant hand
• Made in the USA

Occidental Leather 5564 Applications

• Electrical work: organize wire nuts, couplers, and connectors
• General carpentry: keep layout tools and small fasteners accessible
• Remodeling and finish tasks: carry driver bits and small fittings
• Jobsite service work: compact storage for frequently used parts

Occidental Leather 5564 Installation Overview

1. Thread onto a compatible work belt.
2. Position on the left side for fastener access with the non-dominant hand.
3. Load fasteners and tools into the main and divided outer pouches.
4. Secure and adjust for comfortable reach and balance.

Occidental Leather 5018DB Features

• 11 pockets and tool holders for organized carry
• Built-in tape holster fits tapes up to 35' FatMax
• Dedicated hammer loop for quick access
• Pro-grade leather construction, made in the USA
• Available in right- or left-hand configurations

Occidental Leather 5018DB Applications

• Daily tool organization for carpentry and framing
• Quick access to measuring tape, hammer, and hand tools
• Right- or left-hand workflow setups on professional belts

Occidental Leather 8062 Key Features

• Same features as the 8060 with an added outer pouch
• 10 pockets & tool holders with dedicated storage for squares, driver bits, and cat’s paw
• Streamlined layout for compact carry
• Optimized for left-side wear (fasteners accessed with left hand)
• OxyLights nylon construction with leather reinforcements
• Made in USA

Occidental Leather 8062 Applications

• Framing tasks needing organized fastener access
• General carpentry where compact storage is preferred
• Left-side wear for non-dominant hand tool retrieval
• Jobsite organization for squares, bits, nail sets, and small tools

Occidental Leather 8062 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for non-dominant hand access.
3. Load tools and fasteners into the designated pockets.
4. Confirm the bag is seated securely on the belt.
5. Adjust placement for comfortable reach and balance.

Occidental Leather 5017DB Features

• Classic 3-pouch leather tool bag with no tape pocket for a lighter setup
• Double outer bags plus dedicated holders for hammer, pencil, work knife, chisel, torpedo level, and lumber crayon
• Right-hand layout standard; also offered for left-hand builders as 5017DBLH
• Efficient organization with 10 pockets & tool holders
• Made in the USA

Occidental Leather 5017DB Applications

• Daily carry of core hand tools on the jobsite
• Framing, finish work, and general carpentry tool organization
• Right-side tool access for right-handed users; left-hand option for mirrored workflows
• Use with professional tool belts for quick access and productivity

Occidental Leather 5017DB Installation Overview

1. Select handedness (5017DB right-hand or 5017DBLH left-hand).
2. Slide or attach the bag to your work belt per belt slot/clip configuration.
3. Load core tools into dedicated holders and pouches.
4. Adjust position on belt for comfortable reach and balance.
5. Periodically clean and condition leather to maintain performance.

Key Features

• Popular 2-pouch design without a tape pocket for a clean, lightweight profile
• Right-side wear: keeps hammer, pencils, knife, chisels, and level accessible
• Integrated hammer loop with rugged placement
• USA-made premium leather construction

Applications

• Framing: carry core fastening and layout tools
• Trim carpentry: streamlined storage for measuring and cutting tools
• Light finish work: organized access to small hand tools

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into designated holders (pencils, knife, chisels, level, hammer).
4. Confirm balance and adjust placement for comfort.

Occidental Leather B8064 Key Features

• 4-bag layout: main, outer, upper, and patented 2-in-1 outer pouch
• Integrated angle square holster between main and outer bags
• Dedicated holders for tri-square, cat’s paw, driver bits, and nail sets
• Right-handed layout — fastener bag is worn on the left side
• Industrial nylon with leather reinforcements for lightweight durability
• Pockets & tool holders: 10
• Made in USA

Occidental Leather B8064 Applications

• Framing and general carpentry tool and fastener organization
• Layout work requiring quick access to angle square and measuring tools
• Daily carry of nails, screws, and small hand tools on the jobsite

Occidental Leather B8064 Installation Overview

1. Thread onto a compatible work belt.
2. Position on the left side for right-handed setups.
3. Load fasteners and tools into the main, outer, and upper pouches.
4. Stow angle square in the integrated holster; place small bits in dedicated sleeves.
5. Adjust placement for comfort and balance during use.

Occidental Leather B8064LH Features

• Patented 2-in-1 outer pouch with built-in angle square holster
• Dedicated sleeves/loops for tri-square, cat’s paw, nail sets and driver bits
• Left-handed layout — worn on right side for fast access
• Lightweight OxyLights design for all-day comfort
• Made in USA

Occidental Leather B8064LH Applications

• Framing and general carpentry fastener organization
• Keeping layout tools (angle square, tri-square) readily accessible
• Storing small tools and driver bits on the jobsite

Occidental Leather B8064LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for left-handed setups.
3. Load fasteners and tools into the main, outer and upper pouches.
4. Use dedicated sleeves/loops for squares, cat’s paw and bits.