Occidental Leather
Occidental Leather 5026 Utility Rectangular Loop
$15.90
Unit price perOccidental Leather 5026 Utility Rectangular Loop Description
Upgrade any tool belt with a compact leather attachment point. The Occidental Leather 5026 provides a secure place to clip tape measures, meter cases, and clip-on bags. It fits belts up to 3" wide and accepts clips up to 1" wide for fast, dependable access. Made in the USA.
Occidental Leather 5026 Includes
- (1) Occidental Leather 5026 Utility Rectangular Loop
Occidental Leather 5026 Features
- Versatile clip-on attachment point for tape measures, clip-on bags, and meter cases
- Fits work belts up to 3" wide
- Accepts clips up to 1" wide
- Premium leather strap with rivet reinforcement
- Rectangular metal loop hardware for secure clipping
- Lightweight, low-profile design (approx. 0.1 lb)
- Made in USA
Occidental Leather 5026 Applications
- Add a clip-on anchor point to a compatible work belt
- Keep tape measures and small tools within easy reach
- Hang clip-on pouches or meter cases to expand storage
- Organize frequently used accessories at your side
Occidental Leather 5026 Installation Overview
- Slide the loop onto a work belt up to 3" wide.
- Position it on the belt where access is most convenient.
- Clip your accessory to the rectangular metal loop.
- Confirm the accessory’s clip is 1" wide or less.
- Test the attachment for a secure hold before use.
Occidental Leather 5026 Specifications
| Manufacturer | Occidental Leather |
| SKU | 5026 |
| GTIN | 759244143706 |
| Belt Compatibility | Fits belts up to 3" wide |
| Clip Compatibility | Accepts clips up to 1" wide |
| Material | Leather strap with metal rectangular loop |
| Weight | 0.1 lb |
| Country of Origin | USA |
Occidental Leather 5026 Utility Rectangular Loop
Leather rectangular loop for 3" belts
✓ Fits 3" belts for broad compatibility
✓ Accepts 1" clips for tape measures & pouches
✓ Rugged leather strap with rivet reinforcement
✓ Rectangular metal loop for secure clipping
✓ Made in USA
$15.90
Unit price per10 in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
- Regular cleaning: Wipe the leather strap with a dry or slightly damp cloth to remove dust and jobsite debris. For heavier soil, use a small amount of mild soap on a damp cloth, then wipe clean; do not soak.
- Drying: If exposed to rain or moisture, allow the leather to air-dry at room temperature. Keep away from direct heat sources and prolonged sunlight.
- Conditioning: Apply a quality leather conditioner sparingly as needed to keep the leather supple. Test on a small inconspicuous area first and buff off any excess.
- Hardware care: After exposure to moisture, dry the metal loop to help prevent corrosion. Avoid harsh chemicals or abrasives that can stain or damage the leather.
- Storage: Store in a cool, dry place. Avoid solvents, oils, and prolonged UV exposure.
- Use guidelines: Designed for belts up to 3" wide and clips up to 1"; do not force onto wider belts or clips. Periodically inspect rivets and leather for wear and discontinue use if damaged.
- Versatile clip-on point — Ideal for tape measures, clip-on bags, and meter cases
- Fits work belts: up to 3" wide
- Accepts clips: up to 1" wide
- Construction: premium leather strap with rivet reinforcement and rectangular metal loop
- Lightweight: 0.1 lb
- Country of Origin: USA
- GTIN: 759244143706
More About Occidental Leather 5026 Utility Rectangular Loop
Occidental Leather 5026 Utility Rectangular Loop Description
Upgrade any tool belt with a compact leather attachment point. The Occidental Leather 5026 provides a secure place to clip tape measures, meter cases, and clip-on bags. It fits belts up to 3" wide and accepts clips up to 1" wide for fast, dependable access. Made in the USA.
Occidental Leather 5026 Includes
- (1) Occidental Leather 5026 Utility Rectangular Loop
Occidental Leather 5026 Features
- Versatile clip-on attachment point for tape measures, clip-on bags, and meter cases
- Fits work belts up to 3" wide
- Accepts clips up to 1" wide
- Premium leather strap with rivet reinforcement
- Rectangular metal loop hardware for secure clipping
- Lightweight, low-profile design (approx. 0.1 lb)
- Made in USA
Occidental Leather 5026 Applications
- Add a clip-on anchor point to a compatible work belt
- Keep tape measures and small tools within easy reach
- Hang clip-on pouches or meter cases to expand storage
- Organize frequently used accessories at your side
Occidental Leather 5026 Installation Overview
- Slide the loop onto a work belt up to 3" wide.
- Position it on the belt where access is most convenient.
- Clip your accessory to the rectangular metal loop.
- Confirm the accessory’s clip is 1" wide or less.
- Test the attachment for a secure hold before use.
Occidental Leather 5026 Specifications
| Manufacturer | Occidental Leather |
| SKU | 5026 |
| GTIN | 759244143706 |
| Belt Compatibility | Fits belts up to 3" wide |
| Clip Compatibility | Accepts clips up to 1" wide |
| Material | Leather strap with metal rectangular loop |
| Weight | 0.1 lb |
| Country of Origin | USA |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
