Occidental Leather
Occidental Leather OxyLights Nylon Fastener Bag with Double Outer Bag 8064
$129.90
Unit price perOccidental Leather B8064 Description
The OxyLights™ Fastener Bag with Double Outer Bag delivers compact, high-capacity organization for framing and general carpentry. Its patented 2-in-1 outer pouch integrates an angle square holster between the main and outer compartments, while dedicated sleeves keep a tri-square, cat’s paw, nail sets and driver bits close at hand. Designed for right-handed setups, it is worn on the left side.
Occidental Leather B8064 Includes
- (1) OxyLights Fastener Bag with Double Outer Bag
Occidental Leather B8064 Key Features
- 4-bag layout: main, outer, upper, and patented 2-in-1 outer pouch
- Integrated angle square holster between main and outer bags
- Dedicated holders for tri-square, cat’s paw, driver bits, and nail sets
- Right-handed layout — fastener bag is worn on the left side
- Industrial nylon with leather reinforcements for lightweight durability
- Pockets & tool holders: 10
- Made in USA
Occidental Leather B8064 Applications
- Framing and general carpentry tool and fastener organization
- Layout work requiring quick access to angle square and measuring tools
- Daily carry of nails, screws, and small hand tools on the jobsite
Occidental Leather B8064 Installation Overview
- Thread onto a compatible work belt.
- Position on the left side for right-handed setups.
- Load fasteners and tools into the main, outer, and upper pouches.
- Stow angle square in the integrated holster; place small bits in dedicated sleeves.
- Adjust placement for comfort and balance during use.
Occidental Leather B8064 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 9" x 8" |
| Outer Bag | 8" x 6" |
| Upper Bag | 4.5" x 4.5" |
| Material | Industrial nylon with leather reinforcements |
| Handedness | Right-handed layout (worn on left side) |
| Country of Manufacture | USA |
Occidental Leather OxyLights Nylon Fastener Bag with Double Outer Bag 8064
OxyLights fastener bag, 4-bag, 10-pocket nylon
✓ 4-bag layout — Main, outer, upper, and 2-in-1 pouch for layered storage
✓ Patented 2-in-1 outer pouch with built-in angle square holster
✓ Dedicated holders for tri-square, cat’s paw, driver bits, nail sets
✓ 10 pockets/tool holders; Main: 9" x 8", Outer: 8" x 6", Upper: 4.5" x 4.5"
✓ Made in USA
$129.90
Unit price per6 in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Nylon Gear Care
- Brush off jobsite debris daily and wipe with a damp cloth; air dry.
- Shake out the interior periodically to remove grit.
- Avoid prolonged sun exposure and harsh chemical cleaners.
- For stubborn grime, clean with mild soap and water.
- Store in a cool, dry place when not in use.
- 4-bag layout — main, outer, upper, and patented 2-in-1 outer pouch
- Angle square holster integrated between main and outer bags
- Dedicated holders for tri-square, cat’s paw, driver bits, and nail sets
- Right-hand layout — fastener bag worn on the left side
- Industrial nylon with leather reinforcements for durable, lightweight use
- Pockets & Tool Holders: 10
- Main Bag: 9" x 8"
- Outer Bag: 8" x 6"
- Upper Bag: 4.5" x 4.5"
- Made in USA
More About Occidental Leather OxyLights Nylon Fastener Bag with Double Outer Bag 8064
Occidental Leather B8064 Description
The OxyLights™ Fastener Bag with Double Outer Bag delivers compact, high-capacity organization for framing and general carpentry. Its patented 2-in-1 outer pouch integrates an angle square holster between the main and outer compartments, while dedicated sleeves keep a tri-square, cat’s paw, nail sets and driver bits close at hand. Designed for right-handed setups, it is worn on the left side.
Occidental Leather B8064 Includes
- (1) OxyLights Fastener Bag with Double Outer Bag
Occidental Leather B8064 Key Features
- 4-bag layout: main, outer, upper, and patented 2-in-1 outer pouch
- Integrated angle square holster between main and outer bags
- Dedicated holders for tri-square, cat’s paw, driver bits, and nail sets
- Right-handed layout — fastener bag is worn on the left side
- Industrial nylon with leather reinforcements for lightweight durability
- Pockets & tool holders: 10
- Made in USA
Occidental Leather B8064 Applications
- Framing and general carpentry tool and fastener organization
- Layout work requiring quick access to angle square and measuring tools
- Daily carry of nails, screws, and small hand tools on the jobsite
Occidental Leather B8064 Installation Overview
- Thread onto a compatible work belt.
- Position on the left side for right-handed setups.
- Load fasteners and tools into the main, outer, and upper pouches.
- Stow angle square in the integrated holster; place small bits in dedicated sleeves.
- Adjust placement for comfort and balance during use.
Occidental Leather B8064 Specifications
| Pockets & Tool Holders | 10 |
| Main Bag | 9" x 8" |
| Outer Bag | 8" x 6" |
| Upper Bag | 4.5" x 4.5" |
| Material | Industrial nylon with leather reinforcements |
| Handedness | Right-handed layout (worn on left side) |
| Country of Manufacture | USA |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
