Free Shipping

Occidental Leather 5080LH LG Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout promotes work rhythm
• Made in USA

Occidental Leather 5080LH LG Applications

• Framing and general carpentry
• Fastener and small tool organization on site
• Measuring and layout tasks
• Daily carry for hammers, tapes, and hand tools

Occidental Leather 5080LH LG Installation Overview

1. Put the belt on over work clothes where you normally wear it.
2. Note the hole used to fasten the belt.
3. Measure from the buckle to that hole to determine belt size.
4. Load tools into hand specific holders and adjust fit for comfort.

Occidental Leather 5080LG Key Features

• Premium top grain leather construction
• Hand specific tool holders for working rhythm
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Function engineered for modern builders
• Left handed option available as 5080LH
• Made in USA

Occidental Leather 5080LG Applications

• Framing and general carpentry tool carry
• On site construction and renovation
• Efficient organization of fasteners and hand tools
• Daily use by professional builders

Occidental Leather 5080LG Installation Overview

1. Place belt over typical work clothing where it will be worn.
2. Measure from the buckle to the hole you use most.
3. Select the belt size mid range closest to that measurement.
4. Adjust using the 9 holes and position bags and holders as preferred.

Occidental Leather 8086LHLG Key Features

• Hand specific tool holders for a left handed layout
• Padded two ply bags maintain shape
• Industrial nylon body for high abrasion resistance
• Leather tool holders with leather reinforced corners
• Seven bag configuration with patented 2-in-1 outer pouch

Occidental Leather 8086LHLG Installation Overview

1. Lay your current belt flat and measure from the buckle end to the most used hole.
2. Select the belt size whose mid range is closest to that measurement.
3. If you do not have a belt, use your approximate mid range waist measurement to choose size.

Occidental Leather 5087 SM Key Features

• Premium top grain leather construction
• Hand-specific tool holders for an efficient working rhythm
• Copper rivets reinforce primary bags
• NoSpill tool holder system keeps tools secure
• Function engineered for the modern builder
• Left-handed option available as 5087LH

Occidental Leather 5087 SM Applications

• Framing and rough carpentry
• General construction and remodeling
• Jobsite tool organization

Occidental Leather 5087 SM Installation Overview

1. Measure your current belt from buckle to most-used hole to select size.
2. Adjust the belt to fit over typical work clothing.
3. Arrange tape holder on the left and position bags for dominant hand use.
4. Secure hammer holder and load tools into designated pockets.
5. Check comfort and balance; re-adjust as needed.

Occidental Leather 5063 Features

• Beltless compatibility for streamlined setup
• Three-pouch layout for fastener organization
• Left-side fastener orientation
• Durable leather construction
• Made in USA

Occidental Leather 5063 Applications

• Carry layout tools like driver bits and angle squares
• Organize nails and small fasteners
• Framing and carpentry tasks
• General construction tool carry

Occidental Leather 5063 Installation Overview

1. Attach pouch to Stronghold Beltless System per manufacturer guidance.
2. Position on the left side for fastener access.
3. Load tools and fasteners into main, middle, and outer bags.
4. Check balance and retention before use.

Occidental Leather 8585M Key Features

• Hand specific tool holders for efficient layout
• Padded two ply bags hold shape under load
• Industrial nylon with leather holders and reinforced corners
• Leather FatLip mouth keeps the bag formed and protected
• Full leather boot for rugged wear
• Left handed version available as 8585LH
• Made in USA

Occidental Leather 8585M Applications

• Carpentry and framing tool organization
• Jobsite fastener and small parts carry
• Daily use for production builders
• General construction tool storage
• Remodeling and trim work setups

Occidental Leather 8585M Installation Overview

1. Lay your current belt flat and measure from buckle end to your most used hole.
2. Select Medium if the mid range near 37 in. matches your measurement.
3. Adjust using the 9 holes to fine tune fit across 4 in. of range each way.
4. Attach bags and hammer holder to preferred positions.
5. Load tools and confirm balance and comfort before use.

Occidental Leather 5087 LG Key Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout with tape holder on left
• Function engineered for modern builders
• Made in USA

Occidental Leather 5087 LG Applications

• Framing and general carpentry
• Organized tool and fastener carry on the jobsite
• Outdoor construction environments
• Setups favoring tape holder on the left side
• Daily use by professional trades

Occidental Leather 5087 LG Installation Overview

1. Measure your current tool belt from buckle end to used hole to determine size.
2. Position tool bag on dominant hand side and fastener bag on opposite side.
3. Buckle the 3 in. Ranger belt at midpoint hole and adjust for comfort.
4. Load essential tools and fasteners into designated pockets and holders.
5. Fine tune bag placement for reach and working rhythm.

Occidental Leather 5570 Features

• Full grain leather construction for durability
• Dedicated holders for circle cutter, metal snips, saw, knife, Surform, Oxy tool shield, C-clamps, pencils, and hammer
• Designed for right hand use
• Optimized for drywall professionals
• Keeps all essential tools within easy reach
• Made in the USA

Key Features

• Wide 5 in belt for enhanced back support
• Suspender attachment loops
• Thick padded interior for comfort and moisture wicking
• Heavy-duty buckles and belt loops minimize bag sliding
• 2 in all-leather overbelt; edge-stitched for strength
• Made in the USA

Applications

• Supporting tool bags and pouches on the jobsite
• Use with suspenders via integrated attachment loops
• Comfortable heavy-duty belt for framing, finish, or general carpentry

Installation Overview

1. Put the belt on over typical work clothing where you will wear it.
2. Measure from the buckle to the hole you use; that measurement is your belt size.
3. Select size XL (approx. 45 in belt size) and adjust using the 9-hole range.
4. Attach tool bags to the overbelt and secure through the belt loops.
5. Clip suspenders to the attachment loops if desired and check fit.

Occidental Leather B5060LH Key Features

• Left-handed layout worn on the right side for quick access
• Three stacked pouches with top-access tier
• 9 pockets and tool holders for common layout tools
• Premium leather construction for long-term durability
• Made in the USA

Occidental Leather B5060LH Applications

• Framing and rough carpentry fastener storage
• General carpentry and remodel tasks
• Organizing layout squares, bits, and small tools

Occidental Leather B5060LH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side to suit left-handed setups.
3. Load fasteners and layout tools into the designated pockets.
4. Check balance and adjust position for comfort.

Occidental Leather B8018DB Key Features

• Most popular OxyLights tool bag
• Integrated tape holder fits up to 35 ft FatMax
• Tool-specific holders plus hammer loop for fast access
• Right-side orientation; not offered in left-hand model
• Durable leather and nylon construction

Occidental Leather B8018DB Applications

• Everyday carry of layout and cutting tools
• Framing and finish tasks requiring fast access to hand tools
• Jobsite organization with right-hand dominant layouts
• Tape, level, and marking tool storage on belt systems

Occidental Leather B8018DB Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into the dedicated holders and main pockets.
4. Place a tape measure in the leather holder; verify secure fit.
5. Check balance and adjust belt for comfortable carry.

Occidental Leather B5135 LG Key Features

• 5 in wide belt provides added back support
• Suspender attachment loops for optional load distribution
• Thick padded, moisture wicking interior for comfort
• Heavy duty buckles and belt loops minimize bag sliding
• 2 in all leather overbelt keeps pouches stable
• Nickel plated steel hardware; edge stitched for strength
• Handcrafted in the USA

Occidental Leather B5135 LG Applications

• Carrying and stabilizing tool pouches on the jobsite
• Reducing lower back strain during all day wear
• Use with suspenders for added weight distribution
• General construction, carpentry, electrical, and finish work

Occidental Leather B5135 LG Installation Overview

1. Select correct size; position belt around waist over work pants.
2. Thread tool bags onto the overbelt and place in desired positions.
3. Buckle the belt and tighten to a comfortable, secure fit.
4. Attach suspenders to the loops if using for extra support.
5. Recheck fit and adjust pouch spacing as needed.

Occidental Leather 5135 LG Key Features

• 5 in wide belt for back support
• Suspender attachment loops pre-installed
• Thick padded interior for comfort and moisture control
• Heavy-duty buckles and belt loops minimize bag movement
• Edge-stitched leather construction
• Made in USA

Occidental Leather 5135 LG Applications

• Daily wear with Occidental tool bags and systems
• Added back support for heavy tool loads
• Suspender-compatible setups for long shifts
• Carpentry, framing, electrical, and general construction

Occidental Leather 5135 LG Installation Overview

1. Measure an existing tool belt from buckle tip to your used hole to confirm size.
2. Select Large (41 in mid range) and adjust using the 9-hole range.
3. Attach tool bags to the overbelt and secure using belt loops.
4. Connect suspenders to the attachment loops as needed.
5. Check fit and tighten buckles to prevent sliding.

Occidental Leather 5018DBLH Key Features

• Double outer bag design for organized storage
• Holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Integrated tape holster fits tapes up to 35 ft
• Left handed layout worn on the left side
• Premium leather construction

Occidental Leather 5018DBLH Applications

• Daily carry of hand tools on the jobsite
• Framing and carpentry tool organization
• Finish work where quick access to small tools is needed
• Measuring and marking with onboard tape and pencil holders

Occidental Leather 5018DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Secure the tape measure in the holster.
4. Load essential tools into designated pockets and holders.
5. Confirm balanced weight and comfortable reach before use.

Occidental Leather 5087LHLG Features

• 21 pockets & tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout for left handed users
• Function engineered for modern builders
• Made in USA

Occidental Leather 5087LHLG Applications

• Framing and rough carpentry
• General construction and remodeling
• Left handed jobsite tool organization
• Efficient fastener and tool access

Occidental Leather 5087LHLG Installation Overview

1. Select correct belt size and thread through pouches and holders.
2. Position tape holder on right and double pouch tool bag on left.
3. Attach hammer holder and adjust locations as preferred.
4. Buckle belt and adjust for a snug, comfortable fit.
5. Load tools and fasteners; verify balanced weight and access.

Occidental Leather 8080DBLH XXL Key Features

• 20 pockets and tool holders
• Hand-specific leather tool holders for efficient workflow
• Padded two-ply nylon bags maintain shape
• Industrial nylon with leather corner reinforcement for abrasion resistance
• Made in USA

Occidental Leather 8080DBLH XXL Applications

• Framing and general carpentry tool organization
• Jobsite fastener and tool carrying
• Left-handed workflows requiring hand-specific layout

Occidental Leather 8080DBLH XXL Installation Overview

1. Measure and select the correct XXL belt size.
2. Slide tool and fastener bags onto the Ranger belt.
3. Attach the hammer holder at the rear center slot.
4. Adjust belt to preferred hole and secure fit over work clothing.
5. Load tools and fasteners; verify balanced, left-handed layout.

Occidental Leather 8585LHM Key Features

• Left-handed layout
• Leather FatLip bag mouth for structure and abrasion resistance
• Full leather boot with 10 in deep industrial nylon bags
• Hand-specific tool holders and padded two ply construction
• 25 pockets and holders; Made in USA

Occidental Leather 8585LHM Applications

• Framing and rough carpentry
• General construction and remodeling
• Finish and trim tasks requiring organized fasteners and tools
• Jobsite setups needing left-handed tool access

Occidental Leather 8585LHM Installation Overview

1. Measure an existing belt to confirm medium belt size.
2. Position the belt over work clothing and adjust for comfort.
3. Arrange tool and fastener bags on the left-handed layout.
4. Secure the hammer holder and clip-on accessories.
5. Load tools and verify balanced weight and access.

Occidental Leather 8087 M Key Features

• 20 pockets and tool holders
• Hand-specific tool organization
• Padded two-ply bags maintain structure
• Abrasion-resistant industrial nylon with leather reinforcement
• Made in USA

Occidental Leather 8087 M Applications

• Metal framing and stud work
• Finish carpentry tasks
• Remodeling and general construction
• Organizing fasteners, layout tools, and clamps
• Holstering impact drivers or screw guns

Occidental Leather 8087 M Installation Overview

1. Measure and select the correct belt size; fasten at midpoint hole.
2. Attach included bags and holders to the 3" Ranger belt.
3. Adjust belt fit for comfort and balance.
4. Load tools and fasteners; place driver in the gun holster.
5. Verify secure attachment points and even weight distribution.

Occidental Leather 9520LH Features

• Compact, lightweight bag ideal for trim, framing and finish work
• Round-bottom nylon main and outer bags for durability and easy access
• Speed square holder usable inside or outside
• Patented 2-in-1 outer bag increases fastener capacity
• Left-handed layout worn on right side for right-hand access
• Includes 2003 Oxy Tool Shield for sharp tool protection

Occidental Leather 9520LH Applications

• Trim carpentry organization and fastener access
• Framing tasks requiring quick tool retrieval
• Finish work where compact storage is preferred
• Left-handed setups worn on right side

Occidental Leather 9520LH Installation Overview

1. Attach bag securely to your work belt.
2. Position on the right side for left-handed layout.
3. Load fasteners and tools into main and 2-in-1 outer bag.
4. Place speed square in the designated holder (inside or outside).
5. Store sharp tools in the included Oxy Tool Shield.

Occidental Leather 9515LH Key Features

• Fully adjustable for 32 in to 41 in pant waists; ideal for seasonal clothing changes
• D-rings pre-installed for use with suspension systems
• Hand-specific, left-handed layout promotes efficient workflow
• Padded two-ply bags keep their shape
• Extremely abrasion-resistant industrial nylon with leather corner reinforcement
• Removable High Mount Hammer Holder 5059 on rear
• Made in USA

Occidental Leather 9515LH Applications

• Framing and rough carpentry setups
• General construction and remodeling tool carry
• Jobsite organization for left-handed pros
• Use with suspenders via integrated D-rings

Occidental Leather 9515LH Installation Overview

1. Adjust belt to fit 32 in to 41 in pant size using the buckle and crossover system.
2. Position bags and hammer holder to preferred left-handed layout.
3. Secure D-rings to suspenders if desired.
4. Load tools and fasteners; verify bags are balanced and secure.

Occidental Leather 5061LH Key Features

• Left handed layout with tape holster positioned on the left; worn on the right side
• All-leather construction for daily jobsite durability
• 9 total pockets and holders for fasteners and layout tools
• Dedicated slots for angle square, cat's paw, driver bits, and more
• Made in the USA

Occidental Leather 5061LH Applications

• Framing and rough carpentry setups
• Finish carpentry and trim work
• General construction and remodeling

Occidental Leather 5061LH Installation Overview

1. Thread the pouch onto a compatible work belt.
2. Wear on the right side for left handed setups.
3. Load fasteners and tools into the main, outer, and small holders.
4. Position tape in the upper tape pocket for quick access.
5. Adjust placement on the belt for comfort and reach.

Occidental Leather 5089LHLG Key Features

• Premium top grain leather construction for durability
• Seven pouch layout for high capacity organization
• NoSpill tool holder system for secure, efficient access
• Copper rivet reinforcements on main bags
• 12 oz belting leather with steel roller buckle
• Made in USA

Occidental Leather 5089LHLG Applications

• Framing and rough carpentry
• Jobsite tool and fastener carrying
• Production carpentry setups requiring maximum pouch capacity
• Left handed tradespeople needing optimized layout

Occidental Leather 5089LHLG Installation Overview

1. Measure your current tool belt per manufacturer sizing guide and select Large.
2. Adjust the HD Ranger belt to fit over typical work clothing.
3. Position the tool bag on the left and fastener bag on the right for left handed use.
4. Load tools and fasteners into dedicated pockets to balance weight.
5. Secure hammer in holder and verify comfortable reach to primary tools.

Occidental Leather 8089LH SM Key Features

• 22 pockets and tool holders for high capacity
• Hand specific, NoSpill leather tool holders
• Padded two ply bags maintain structure
• Industrial nylon with leather reinforcements for long wear
• Left handed layout; Made in USA

Applications

• Framing and rough carpentry
• Jobsite fastener and tool organization
• General construction and remodeling
• Left handed belt rig setup

Installation Overview

1. Measure and select the correct belt size for over garment wear.
2. Position fastener and tool bags on the left handed layout.
3. Load tools and fasteners; balance weight across the belt.
4. Secure the buckle and adjust for a snug, comfortable fit.
5. Verify hammer holder and tape position for easy access.

Occidental Leather 5062LH Key Features

• Left-handed layout worn on the right side
• Same features as 5060LH plus an additional outer pouch
• Holders for blade square, angle square, driver bits, and cat's paw
• 10 total pockets and tool holders
• Full-grain leather construction for durability
• Made in the USA

Occidental Leather 5062LH Applications

• Framing and rough carpentry fastener carry
• General carpentry tool and hardware organization
• Layout tasks requiring blade and angle squares
• Daily jobsite use where quick access to bits and small tools is needed

Occidental Leather 5062LH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side of the body for left-handed use.
3. Load fasteners and tools into the four stacked compartments.
4. Use dedicated holders for squares, bits, and cat's paw.
5. Adjust placement for comfort and balanced carry.