Free Shipping

Occidental Leather B8080DBSM Key Features

• Hand-specific tool holder layout for efficient workflow
• Double-wall padded nylon bags maintain structure
• Abrasion-resistant industrial nylon construction
• 12 oz belting leather belt with steel roller buckle
• Leather-reinforced corners and tool holders

Occidental Leather B8080DBSM Applications

• Framing and rough carpentry
• General construction tool carry
• Jobsite fastener and tool organization

Occidental Leather B8080DBSM Installation Overview

1. Measure belt fit from buckle end to your most used hole to confirm size.
2. Attach both outer bags to the belt in your preferred handed layout.
3. Secure the hammer holder at rear center and tighten belt at midpoint hole.
4. Load tools and fasteners; adjust pouch positions for balance and access.
5. Verify all rivets, snaps, and holders are seated before use.

Occidental Leather 5070 Key Features

• All-leather build for long-term durability
• 11 total pockets and holders for drywall and lathing tools
• Main bag measures 8 in W x 6 in H
• Right-side dominant layout; worn on right side of body
• Fits 3 in work belts
• Made in the USA
• Approximate weight: 1.4 lbs

Occidental Leather 5070 Applications

• Organizing and carrying drywall cutting and shaping tools
• Lathing tasks requiring quick access to snips, knives, and saws
• Jobsite layout and marking with pencils and scribes
• General drywall installation and finishing support

Occidental Leather 5070 Installation Overview

1. Thread the pouch onto a compatible 3 in work belt.
2. Position on the right side for dominant-hand access.
3. Load tools into dedicated holders to balance weight.
4. Adjust belt and pouch position for comfort and reach.
5. Inspect rivets and stitching periodically during use.

Occidental Leather 8086SM Key Features

• Hand specific tool holders for optimized workflow
• Padded two ply bags that hold their shape
• Industrial nylon construction with leather reinforced corners
• Patented 2 in 1 outer pouch on fastener bag for compact organization
• Available in right or left hand layouts
• Made in USA

Occidental Leather 8086SM Applications

• Framing and rough carpentry setups
• General construction tool and fastener organization
• Jobsite tasks requiring quick access to hand tools
• Production carpentry where lighter weight gear is preferred

Occidental Leather 8086SM Installation Overview

1. Measure your current tool belt from buckle end to the commonly used hole to confirm size Small.
2. Adjust the 5035 Ranger belt to the midpoint hole for proper fit.
3. Slide the B8017DB tool bag and B8064 fastener bag onto the belt in your preferred layout.
4. Attach the 5059 hammer holder at the rear center or your preferred position.
5. Load tools and fasteners, ensuring even weight distribution.

Occidental Leather 6100T LG Features

• Premium top grain leather construction
• Hand specific tool holders for efficient workflow
• Copper rivets reinforce main bags
• NoSpill tool holder system keeps tools secure
• Function engineered for modern builders
• Made in USA

Occidental Leather 6100T LG Applications

• Trim carpentry and finish work
• Light framing tasks
• General jobsite tool organization

Occidental Leather 6100T LG Installation Overview

1. Measure current tool belt from buckle end to your most used hole.
2. Select the size closest to that measurement; this model is Large.
3. Load tools into hand specific holders and secure in NoSpill positions.
4. Seat tape in the high mount holster and adjust belt to midpoint hole.
5. Verify comfort and accessibility before starting work.

Occidental Leather B5018DBLH Features

• 11 pockets and tool holders for common carpentry tools
• Main bag 9 x 8; outer bags 5 x 5.5 for organized access
• Integrated tape holster fits tapes up to 35 ft
• Premium black leather construction; left hand model
• Made in the USA

Occidental Leather B5018DBLH Applications

• Carry and organize chisels, knives, pencils and markers
• Secure holster for 35 ft tape measures
• Hold torpedo level and hammer for framing and finish work
• Left-side wear for left-hand tool access

Occidental Leather B5018DBLH Installation Overview

1. Slide the bag onto your work belt.
2. Position on the left side for left-hand access.
3. Load tools into designated pockets and holders.
4. Place tape measure in the built-in holster.
5. Verify balance and adjust belt for comfort.

Occidental Leather 8080DBLHLG Key Features

• Left handed layout with hand specific tool holders
• Padded two ply tool bags hold their shape
• Industrial nylon body provides high abrasion resistance
• Leather tool holders with OxyRed reinforced corners
• Lighter weight alternative to full leather framer sets

Occidental Leather 8080DBLHLG Applications

• Framing and rough carpentry tasks
• General construction and remodeling
• Jobsite tool organization and carry
• Left handed users needing a dedicated layout

Occidental Leather 8080DBLHLG Installation Overview

1. Measure an existing belt from buckle to the most used hole to determine size.
2. Select the Large belt if your measurement falls in its mid range.
3. Position the belt over work clothing and adjust for a snug fit.
4. Arrange the left handed bags and hammer holder on the belt as preferred.
5. Load tools into the hand specific holders to verify balance and access.

Occidental Leather 9525LHM Key Features

• 25 pockets and tool holders
• Innovative round-bottom, full-capacity tool bags
• Includes 2003 Oxy Tool Shield in each bag
• Hand-specific tool holder layout for left-handed users
• Engineered for trim, finish, and light framing tasks
• 12 oz belting leather with steel roller buckle and padded nylon 3 inch work belt

Occidental Leather 9525LHM Applications

• Trim carpentry and punch list work
• Finish carpentry and cabinet install
• Light framing and layout
• General tool organization on the jobsite

Occidental Leather 9525LHM Installation Overview

1. Measure an existing belt you wear over work clothes to find belt size.
2. Buckle the belt on your waist where it will be worn and note the hole used.
3. Measure from the buckle to that hole; select the belt size that matches.
4. Position tool and fastener bags for a left-handed layout; secure holders.
5. Load tools and check balance and fit; adjust for comfort.

Occidental Leather 8068 Features

• Two-compartment main bag with drill/screw gun holster
• Patented 2 in 1 outer pouch adds storage without bulk
• Right-side layout; square edge to the rear
• Holders for driver bits and pencil
• Leather sleeve for Clip-On accessories
• Rafter square slot behind outer pouch
• Pocket and tool holders: 9
• Weight: 1.25 lbs
• Made in the USA

Occidental Leather 8068 Applications

• Metal framing and stud work tool carry
• Organizing drill, bits, and quick-release clamps
• Keeping rafter square accessible on belt
• Right-side belt-mounted storage for cordless tools

Occidental Leather 8068 Installation Overview

1. Slide bag onto a work belt up to 3 in wide.
2. Position on the right side with square edge to rear.
3. Seat drill or screw gun in the holster.
4. Load bits, pencil, and clamps into designated pockets.
5. Place rafter square in the rear slot and check balance.

Occidental Leather 2580LH Features

• Wide padded shoulder support lined with Dri Lex for moisture management
• Fully adjustable straps for a comfortable fit on most builders
• Balanced load carry to reduce strain and lower back fatigue
• 36 pockets and holders keep essential tools accessible
• Quick release chest buckle and heavy duty D ring for hanging storage

Occidental Leather 2580LH Applications

• Framing tasks needing high capacity tool access
• Electrical work with balanced weight distribution
• Concrete forming and layout
• Trim and finish work in tight spaces

Occidental Leather 2580LH Installation Overview

1. Adjust shoulder straps and chest buckle for a secure, comfortable fit.
2. Attach B8064LH and B8017LH bags to the 3 in leather belting.
3. Ensure tunnel loop attachments are seated; tighten as needed.
4. Load tools into the 36 pockets and holders to balance weight.
5. Use the D ring for hanging storage when removing the vest.

Occidental Leather 8584 Key Features

• 10 in deep main pouch with structured FatLip leather mouth
• Full leather boot for rugged longevity
• 13 pockets and tool holders for everyday layout tools
• Right-side layout; left-hand version available as 8584LH
• Made in the USA

Occidental Leather 8584 Applications

• Organizing and carrying hand tools on a tool belt
• Framing and general carpentry tasks
• Remodeling and jobsite maintenance work
• Right-hand dominant tool layouts

Occidental Leather 8584 Installation Overview

1. Slide the bag onto a compatible work belt through the leather belt slot.
2. Position on the right side for right-hand use (or choose 8584LH for left-hand use).
3. Load tools by category into interior and exterior holders.
4. Secure any clips or add-on holders as needed and check balance.

Occidental Leather 5087 LG Key Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout with tape holder on left
• Function engineered for modern builders
• Made in USA

Occidental Leather 5087 LG Applications

• Framing and general carpentry
• Organized tool and fastener carry on the jobsite
• Outdoor construction environments
• Setups favoring tape holder on the left side
• Daily use by professional trades

Occidental Leather 5087 LG Installation Overview

1. Measure your current tool belt from buckle end to used hole to determine size.
2. Position tool bag on dominant hand side and fastener bag on opposite side.
3. Buckle the 3 in. Ranger belt at midpoint hole and adjust for comfort.
4. Load essential tools and fasteners into designated pockets and holders.
5. Fine tune bag placement for reach and working rhythm.

Occidental Leather B5612 Features

• Light-weight, classic black all leather construction
• External leather hammer holder and double outer bags
• Internal pockets for level, chisel, drill bits, knife, pencils, and lumber crayon
• Reinforced back wall at stress points for durability
• Right-side wear layout; left-hand version available as B5612LH
• Made in USA

Occidental Leather B5612 Applications

• Organizing hand tools for carpentry and framing
• Quick-access storage for chisels, knives, pencils, and bits
• Carrying levels and small measuring tools
• General construction and remodel tool carry

Occidental Leather B5612 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into main and outer pockets; place sharp tools in the Oxy Tool Shield.
4. Adjust placement for comfort and balanced weight.

Occidental Leather B8017DB Key Features

• 3-pouch layout for compact organization
• Dedicated tool holders for chisel, knife, level, pencils, and lumber crayon
• Heavy-duty hammer loop for secure carry
• Main bag corners reinforced with OxyRed leather
• Right-hand layout; left-hand model available

Occidental Leather B8017DB Applications

• Daily carry and organization of essential hand tools
• Carpentry and framing tasks needing quick tool access
• Finish work where compact, lightweight storage is preferred
• Jobsite use with a compatible work belt

Occidental Leather B8017DB Installation Overview

1. Attach the tool bag to a compatible work belt.
2. Position on the right side for right-hand layout.
3. Load tools into dedicated holders and pouches.
4. Check rivets and stitching; ensure secure fit before use.

Occidental Leather B5055 Features

• Even load distribution to relieve hip and lower back strain
• Padded, contoured yoke with sweat-wicking lining
• Secure fit keeps straps from wandering off shoulders
• Tool-friendly chest pockets on both sides
• Heavy-duty center D ring for hanging your rig
• Leather loop attachment system fits up to a 3 in. belt
• Made in USA

Occidental Leather B5055 Applications

• Support and stabilize heavy tool belts during daily use
• Reduce lower back and hip fatigue on framing and carpentry jobs
• Keep rigs balanced when carrying bulky tools and fasteners
• Quickly hang up complete belt systems between tasks

Occidental Leather B5055 Installation Overview

1. Attach leather loops to your tool belt (up to 3 in. width).
2. Connect front clips and set the chest strap to a comfortable tension.
3. Adjust strap lengths for even weight distribution.
4. Check shoulder yoke alignment and secure fit before use.
5. Use the center D ring to hang the rig when removing.

Occidental Leather 9521LH Key Features

• Compact finisher layout ideal for trim, light framing and finish work
• Round bottom, full capacity main and outer bags with two ply foam core retain shape
• Clip on leather tab for tape; driver bit and nail set pouches included
• Metal hammer holder
• Left handed configuration worn on left side for fast tool access

Occidental Leather 9521LH Applications

• Trim carpentry organization
• Light framing tool carry
• Finish carpentry and punch list work

Occidental Leather 9521LH Installation Overview

1. Position on your work belt at the left hip for left handed access.
2. Secure the bag onto the belt and load tools into the dedicated pockets.
3. Attach the included Oxy Tool Shield where needed for sharp tool protection.

Occidental Leather 8585XL Key Features

• Hand specific tool holders for efficient layout
• Padded two ply tool bags hold their shape
• Industrial nylon is highly abrasion resistant
• Leather tool holders with leather reinforced corners
• Available left handed as model 8585LH

Occidental Leather 8585XL Applications

• Carpentry and framing setups
• General construction tool carry
• Remodeling and jobsite installation work

Occidental Leather 8585XL Installation Overview

1. Lay your current belt flat; measure from buckle end to most used hole.
2. Select the Extra Large size closest to that mid range measurement.
3. Position bags and holders to preferred left or right layout.
4. Secure buckle and adjust for a snug, supportive fit.

Key Features

• Popular 3 pouch pro layout without a tape pocket
• Double outer bags for added capacity and organization
• Tool holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Left handed configuration; worn on the left side
• Made in the USA

Applications

• Carpentry and framing tool organization
• General construction and remodeling
• Finish work tool carry
• Jobsite hand tool access and storage

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Load tools into dedicated holders and pouches.
4. Check balance and tighten belt for a secure fit.

Occidental Leather 5080DBLH LG Key Features

• Left handed, hand specific layout
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Built in tape holster for tapes up to 30 ft
• Pockets and tool holders: 21
• Made in USA

Occidental Leather 5080DBLH LG Applications

• Framing and rough carpentry
• General construction tool carry
• Remodeling and jobsite setup
• Efficient organization of tools and fasteners
• Left handed trades needing balanced access

Occidental Leather 5080DBLH LG Installation Overview

1. Measure your current tool belt from buckle end to the used hole to determine belt size.
2. Select size to match the midpoint measurement for proper adjustment.
3. Position tool bag on dominant left side and fastener bag on right.
4. Secure the belt using the steel roller buckle and adjust for comfort.
5. Load tools and tapes into the hand specific holders and verify balanced carry.

Occidental Leather 8017 Features

• Streamlined 2-pouch layout for focused setups
• Right-side wear for tools accessed with the right hand
• 9 total pockets and holders for common hand tools
• Tape pocket removed for a lighter profile
• Made in USA

Occidental Leather 8017 Applications

• Daily carry of layout and framing essentials
• Organizing chisels, knives, pencils, and level on the job
• Right-side tool access for carpentry and trim work

Occidental Leather 5191XL Key Features

• Unique one-piece tool belt assembly for balanced load distribution
• Premium top-grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper-riveted main bags for durability
• NoSpill tool holder system keeps tools secure
• Sheepskin-lined interior for comfort
• Made in USA
• Not available as left-hand model; suggested 9550LH

Occidental Leather 5191XL Applications

• Framing and general carpentry
• Remodeling and residential construction
• Jobsite tool organization and carry
• Finish carpentry tool layout

Occidental Leather 5191XL Installation Overview

1. Put the belt on over typical work clothing and note the hole used.
2. Remove the belt and measure from the buckle end to that hole to confirm size.
3. Adjust fit using midpoint hole; 4 inches of adjustment each way.
4. Load tools into hand-specific holders; secure sharp tools in dedicated holsters.
5. Verify balanced weight before use.

Occidental Leather 6100T LG Features

• Premium top grain leather construction
• Hand specific tool holders for efficient workflow
• Copper rivets reinforce main bags
• NoSpill tool holder system keeps tools secure
• Function engineered for modern builders
• Made in USA

Occidental Leather 6100T LG Applications

• Trim carpentry and finish work
• Light framing tasks
• General jobsite tool organization

Occidental Leather 6100T LG Installation Overview

1. Measure current tool belt from buckle end to your most used hole.
2. Select the size closest to that measurement; this model is Large.
3. Load tools into hand specific holders and secure in NoSpill positions.
4. Seat tape in the high mount holster and adjust belt to midpoint hole.
5. Verify comfort and accessibility before starting work.

Occidental Leather B8064LH Key Features

• Patented 2-in-1 outer pouch with built-in angle square holster
• Four-bag layout: main, outer, upper, and 2-in-1 pouch
• Dedicated holders for tri-square, cat's paw, nail sets, and driver bits
• Left-handed configuration; worn on right side
• Industrial nylon with leather reinforcements; Made in USA

Occidental Leather B8064LH Applications

• Framing and general carpentry fastener storage
• Organizing layout tools such as angle and tri-squares
• Jobsite carry for nail sets, driver bits, and pry tools
• Left-handed belt setups worn on the right hip

Occidental Leather B8064LH Installation Overview

1. Orient the pouch for right-side wear for left-handed users.
2. Thread onto your work belt and position for comfortable reach.
3. Secure adjacent holders as needed and load tools by category.
4. Confirm clear access to the 2-in-1 outer pouch and square holster.

Occidental Leather 5080DBM Key Features

• Premium top?grain leather construction
• Hand?specific tool layout for natural workflow
• NoSpill tool holder system keeps tools secure
• Copper?riveted stress points for long service life
• Engineered for modern builders; Made in USA

Occidental Leather 5080DBM Applications

• Framing and rough carpentry
• General construction and remodeling
• Deck building and exterior projects
• Jobsite tool and fastener organization
• Roofing layout and install tasks

Occidental Leather 5080DBM Installation Overview

1. Measure your existing tool belt from buckle end to the commonly used hole to confirm Medium size.
2. Thread the tool and fastener bags onto the belt in a hand?specific layout.
3. Adjust belt to a comfortable, balanced fit at the midpoint hole.
4. Load essential tools and fasteners, using NoSpill holders for security.
5. Verify clear access to primary tools and make final fit adjustments.

Occidental Leather B5080DBLH M Key Features

• Premium top grain leather construction
• NoSpill tool holder system keeps tools secure
• Hand specific tool layout for efficient workflow
• Copper rivets reinforce stress points
• Function driven design for professional framers

Occidental Leather B5080DBLH M Applications

• Framing and rough carpentry
• General jobsite tool and fastener carry
• Remodeling and construction tasks
• Layout work with tape and square holsters
• Left handed workflow setups

Occidental Leather B5080DBLH M Installation Overview

1. Measure your existing tool belt from buckle end to the used hole to determine belt size.
2. Select Medium if your midpoint measurement is about 37 in.
3. Attach tool and fastener bags to the belt with tool bag on the left and fastener bag on the right for left handed use.
4. Secure hammer holder and adjust belt to a comfortable fit.
5. Load tools and verify access and balance.