Free Shipping

Occidental Leather 8585XL Key Features

• Hand specific tool holders for efficient layout
• Padded two ply tool bags hold their shape
• Industrial nylon is highly abrasion resistant
• Leather tool holders with leather reinforced corners
• Available left handed as model 8585LH

Occidental Leather 8585XL Applications

• Carpentry and framing setups
• General construction tool carry
• Remodeling and jobsite installation work

Occidental Leather 8585XL Installation Overview

1. Lay your current belt flat; measure from buckle end to most used hole.
2. Select the Extra Large size closest to that mid range measurement.
3. Position bags and holders to preferred left or right layout.
4. Secure buckle and adjust for a snug, supportive fit.

Occidental Leather 5061 Key Features

• All leather construction built for daily jobsite durability
• Top tape pocket for quick access
• Nine total pockets and holders for fasteners and layout tools
• Two lower bags to sort small tools and nails
• Tool slots for angle square, cat's paw, driver bits, and more
• Available in right- or left-hand setups
• Made in the USA

Occidental Leather 5061 Applications

• Framing and general carpentry layouts
• Finish work where organized fastener access is needed
• Jobsite fastener and small tool organization on a tool belt

Occidental Leather 5061 Specifications

Occidental Leather 9520 Key Features

• Compact 2 in 1 design adds fastener capacity without extra bulk
• Round bottom nylon pouches hold shape and resist collapse
• Speed square slot for inside or outside carry
• Includes Oxy Tool Shield for sharp tool protection
• 11 total pockets and tool holders
• Available in right or left hand layouts
• Made in USA

Occidental Leather 9520 Applications

• Trim carpentry and finish installations
• General framing and layout tasks
• Organizing fasteners, bits, and small tools
• Speed square carry and quick measurement access

Occidental Leather 9520 Installation Overview

1. Slide the pouch onto a compatible work belt.
2. Choose left or right hand layout to match your setup.
3. Place fasteners in the main and outer bags; organize small tools in holders.
4. Insert sharp tools into the Oxy Tool Shield.
5. Seat the speed square in the dedicated slot for quick access.

Occidental Leather 8583 Key Features

• FatLip leather mouth keeps the bag open and protected
• Full leather boot for long-term durability
• Patented 2-in-1 outer bag with built-in angle square holster
• Tri-square sleeve, cat's paw loop, and external pouches for nail sets or driver bits
• Designed as the left-side fastener bag for right-handed setups; left-handed version available as 8583LH
• Made in USA

Occidental Leather 8583 Applications

• Framing and structural carpentry fastener storage
• Drywall and general construction small tool organization
• Quick-access holster for angle squares on the jobsite
• Left-side carry for right-handed belt systems

Occidental Leather 8583 Specifications

Occidental Leather 9596 Key Features

• All-leather construction built for commercial electricians
• Adjust-to-Fit belt fits 32 to 40 inch pant waists
• NoSpill leather holders help prevent tool drops
• Hand-specific layout for fast, efficient access
• Balanced design for all-day comfort
• Made in the USA

Occidental Leather 9596 Applications

• Electrical install and service tasks
• Rough-in and finish wiring work
• Panel, fixture, and device installation
• General jobsite tool and fastener organization

Occidental Leather 9596 Installation Overview

1. Measure your current tool belt from the buckle end to the hole you use.
2. Select the Adjust-to-Fit range that covers 32 to 40 inch pant waists.
3. Position pouches and holders for hand-specific access.
4. Cinch belt to a comfortable, balanced fit and verify tool retention.

Occidental Leather B5080DB LG Features

• 22 pockets and tool holders
• Premium top grain leather construction
• Hand Specific tool holder placement for efficient workflow
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Function engineered for modern builders

Occidental Leather 5500 Key Features

• All leather construction for durability
• 15 pockets and tool holders for everyday electrical tools
• Flashlight loop, electrical tape chain, and quick release tool snap
• Heavy duty hammer holder
• Tunnel loop mount fits belts up to 3 in. wide
• Made in USA

Occidental Leather 5500 Applications

• Daily electrical service and installation
• Organized belt carry for screwdrivers, pliers, and testers
• Maintenance and facility repair work
• Remodeling and jobsite troubleshooting

Occidental Leather 5500 Installation Overview

1. Thread work belt through the tunnel loop; fits up to 3 in. width.
2. Load core tools into dedicated pockets and sleeves.
3. Attach small tools to the quick release snap as needed.
4. Hang electrical tape rolls on the chain for quick access.
5. Confirm balance and secure fit before use.

Key Features

• Hand-specific tool holders for efficient access
• Padded two-ply, foam-core bags maintain shape
• Abrasion-resistant industrial nylon construction
• Adjust-to-Fit belt allows quick sizing changes
• D-rings pre-installed for suspension system compatibility
• Left-handed model available as 9540LH
• Made in USA

Applications

• Finish carpentry setups
• Trim installation
• Light framing tasks
• General jobsite tool and fastener organization

Installation Overview

1. Adjust belt to fit over typical work clothing.
2. Position left fastener and right tool bags for reach preference.
3. Attach the high mount hammer holder at the center back.
4. Clip Oxy Tool Shields to bags or belt as needed.
5. Load tools and fasteners evenly; connect suspenders to D-rings if used.

Occidental Leather 5036SM Key Features

• Premium top grain leather tool bags
• 12 oz belting leather belt with steel roller buckle
• NoSpill tool holder system keeps tools upright
• Hand specific organization engineered for electricians
• Made in USA

Occidental Leather 5036SM Applications

• Electrical install and service work
• Wire termination and panel assembly
• Commercial and residential troubleshooting
• Tool and fastener organization on the jobsite

Occidental Leather 5036SM Installation Overview

1. Measure an existing work belt from buckle end to the most used hole to find belt size.
2. Wear over normal work clothes and note the hole used for fastening.
3. Select Small size if your measured midpoint is about 34 in.
4. Assemble components on the belt in your preferred hand specific layout.

Occidental Leather 5018 Key Features

• Right-hand layout with holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Integrated tape measure holster fits tapes up to 35 ft
• Durable full-grain leather construction
• Two main pouches for fast access and organization
• Available in a left-hand version (5018DBLH / 5018LH)

Occidental Leather 5018 Applications

• Carpentry and framing tool carry
• Finish work and trim installation
• General construction and remodeling
• Measuring, marking, and layout tasks
• Jobsite tool organization on a work belt

Occidental Leather 5018 Installation Overview

1. Thread the bag onto a compatible work belt.
2. Position on the right side for right-hand access.
3. Load tools into designated holders and pouches.
4. Place tape in the built-in holster.
5. Verify balance and adjust placement for comfort.

Occidental Leather 5089 XXL Features

• Premium top grain leather construction
• Hand-specific tool holders for efficient workflow
• Copper rivet reinforcements on main bags
• NoSpill tool holder system for secure storage
• Function engineered for professional framers
• Available left-handed option: 5089LH
• Made in the USA

Occidental Leather 5089 XXL Applications

• Framing: organize and carry essential tools and fasteners
• General carpentry: keep hand tools accessible on site
• Jobsite setup: maximize capacity with seven pouch layout
• Heavy outdoor use: durable leather for demanding conditions

Occidental Leather 5089 XXL Installation Overview

1. Measure from the end of your belt buckle to the hole you use to fasten.
2. Select the belt size closest to that measurement; XXL is mid range 49 inches.
3. Attach tool and fastener bags to the belt per your hand preference.
4. Secure the hammer holder and adjust belt to the midpoint hole.
5. Load tools and confirm comfortable, balanced fit.

Occidental Leather 8060 Features

• 3-pouch layout for fasteners and small tools
• Tool-specific holders for blade square, angle square, cat's paw, and bits
• Lightweight OxyLights construction with leather reinforcements
• Optimized for framing and general carpentry
• Made in USA

Occidental Leather 8060 Applications

• Framing: Keep nails, layout square, and bits at hand
• General Carpentry: Organized storage for everyday fasteners
• Layout Work: Dedicated blade square and angle square holders
• Punch list tasks: Compact carry of small tools and hardware

Occidental Leather 8060 Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for right-handed setups or per preference.
3. Load fasteners and layout tools into the main, outer, and upper pouches.
4. Use dedicated holders for blade square, angle square, bits, and cat's paw.
5. Check balance and retention before starting work.

Key Features

• 21 pockets and tool holders
• Hand specific tool holder layout
• Padded two ply tool bags keep their shape
• Extremely abrasion resistant industrial nylon with leather reinforcement
• Made in USA

Applications

• Framing and rough carpentry
• General construction and remodeling
• Jobsite fastener and hand tool organization
• Production carpentry requiring high capacity storage

Installation Overview

1. Select size Large; mid range fit is 41 in. with 4 in. adjustment each way.
2. Thread the pouches onto the 3 in. Ranger belt and position for dominant hand.
3. Secure the High Mount Hammer Holder at the rear center.
4. Load tools and fasteners; balance weight across both bags.
5. Buckle belt using one of 9 holes; ensure snug, comfortable fit.

Occidental Leather 5017 Features

• Popular two pouch layout without extra outer pouch and tape pocket
• Dedicated holders for pencils, work knife, lumber crayon, chisel, torpedo level, and hammer
• Right side wear for quick right hand access
• Hammer loop included
• Made in USA leather construction

Occidental Leather 5017 Applications

• Framing and general carpentry tool carry
• Trim and light finish work organization
• Daily-use tool access on the right side of the belt
• Hammer and small hand tool holstering

Occidental Leather 5017 Installation Overview

1. Slide the bag onto your work belt.
2. Position on the right side for right hand access.
3. Load essential tools into the main and outer bags.
4. Place hammer in the loop and secure small items in dedicated holders.
5. Adjust placement for comfort and balance.

Key Features

• 12 pockets and tool holders in a compact, jobsite-efficient layout
• Two-ply foam-core construction maintains structure when empty or loaded
• Clip-on leather tab for tape or accessory pouches
• Steel hammer loop; interior leather tool sleeves
• Right-hand layout; left-hand model available as 9521LH

Applications

• Trim carpentry and finish work
• Light framing tasks
• Cabinetry and punch-list work
• Right-side tool carry for dominant-hand access

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the right side for standard orientation.
3. Attach clip-on leather tab accessories as needed.
4. Insert the Oxy Tool Shield for chisels or knives.
5. Load tools and check balance and access.

Key Features

• Upright storage with 3 internal compartments for quick access
• 45 pockets and tool holders for organized carry
• All-leather main body with water-resistant rubber base
• Handcrafted leather handle that molds to your grip
• D-rings for shoulder strap attachment (strap not included)

Applications

• Carpentry and finish work tool organization
• Jobsite transport of hand tools, fasteners, and accessories
• Shop or service vehicle tool storage

Installation Overview

1. Attach clip-on accessories to exterior mounting points as needed.
2. Organize tools within the three compartments and outer pockets.
3. Secure small parts in the side zip pouch and tool shields.
4. Connect a compatible shoulder strap to D-rings if desired.

Occidental Leather 2580 Key Features

• Maximum comfort with wide padded shoulder yoke lined with Dri-Lex for moisture control
• Even load distribution reduces back fatigue and increases carry efficiency
• Fully adjustable straps; one size fits most
• Quick release chest buckle for fast on/off
• Heavy-duty storage D-ring for hanging
• 36 pockets and tool holders for organized access
• Made in USA

Occidental Leather 2580 Applications

• Framing tasks requiring balanced tool carry
• Electrical installations and service work
• Concrete forming and layout
• Trim carpentry and finish work

Occidental Leather 2580 Installation Overview

1. Adjust shoulder straps and side straps for a comfortable fit.
2. Attach included tool and fastener bags to the leather belting.
3. Secure the chest buckle; verify even weight distribution.
4. Load essential tools into pockets and holders.
5. Use the D-ring to hang the vest when storing off the clock.

Occidental Leather 6101 Features

• Trim-ready compact leather design for finish work
• Tool-specific holders for nail sets, blade square, and cat's paw
• Streamlined layout reduces bulk and keeps tools organized
• No angle square holster
• Made in USA
• Left-hand version available as 6101LH

Occidental Leather 6101 Applications

• Trim and finish carpentry
• Light framing tasks
• Interior remodel and punch list work
• Organizing fasteners and layout tools on the left side

Occidental Leather 6101 Installation Overview

1. Attach the bag securely to your work belt.
2. Load fasteners and layout tools into dedicated pockets.
3. Wear on the left side for easy left-hand access.

Occidental Leather 9920 Key Features

• Pro Leather construction for long service life
• Bull pin loop on each side for convenient access
• Tunnel loop accepts work belts up to 3 inches
• Three total pockets and holders for organized storage
• Made in the USA

Occidental Leather 9920 Applications

• Carrying bolts and heavy fasteners on steel erection and ironwork
• Keeping bull pins and drift pins accessible on the job
• General construction tasks requiring a rugged fastener pouch

Occidental Leather 9920 Installation Overview

1. Thread the tunnel loop onto a work belt up to 3 inches wide.
2. Position the bag at preferred location on the belt.
3. Load bolts and fasteners into the main pocket.
4. Place bull pins in the side loops for quick access.

Occidental Leather 6102 Key Features

• 9 total pockets and tool holders for finish essentials
• All-leather construction for durability
• Interior sleeves for pencil, knife, chisel, and lumber crayon
• Exterior tool snap clip and heavy-duty hammer loop
• Right-hand layout; worn on the right side
• Made in the USA

Occidental Leather 6102 Applications

• Trim and finish carpentry
• Cabinetry and installation work
• Light framing tasks
• Everyday carry for right-handed tool access

Occidental Leather 6102 Installation Overview

1. Slide pouch onto your work belt.
2. Position on the right side for optimal access.
3. Load primary tools into main and outer bags.
4. Place pencil, knife, chisel, and crayon in interior holders.
5. Secure hammer in loop and clip accessory to the tool snap.

Occidental Leather 9550 Key Features

• Premium top-grain leather bags with copper-riveted stress points
• Adjust-to-Fit belt for pant waist 32 to 41; locks securely in place
• Rugged commercial nylon belt with high-density neoprene padding
• D rings pre-installed for use with suspension systems
• Hand-specific tool holders for efficient workflow
• Fixed-position bags help prevent shifting
• Made in USA

Occidental Leather 9550 Applications

• Framing and rough carpentry
• General residential and commercial construction
• Remodeling and jobsite service work
• Tool and fastener organization on the go
• Use with suspension systems for extended wear

Occidental Leather 9550 Installation Overview

1. Adjust belt to your pant waist size (32 to 41) and secure the crossover system.
2. Position the tool bag on your dominant side and fastener bag opposite.
3. Attach the removable High Mount Hammer Holder on the rear as desired.
4. Clip suspension system to pre-installed D rings if used.
5. Load tools and fasteners; confirm bags sit securely without shifting.

Occidental Leather B8064 Features

• Patented 2-in-1 outer pouch with angle square holster
• Tri-square sleeve, cat's paw loop, nail set and driver bit pouches
• Four-bag layout for layered storage
• Holds fasteners and tools commonly accessed with the left hand
• Made in USA

Occidental Leather B8064 Applications

• Framing: Keep nails, square, and layout tools organized
• General carpentry: Quick access to bits, nail sets, and cat's paw
• Layout work: Integrated angle square holster for fast measurement
• Jobsite organization: Layered pouches separate fasteners and small tools

Occidental Leather B8064 Installation Overview

1. Select right- or left-handed variant to match your setup.
2. Slide the bag onto a compatible work belt and secure.
3. Position fastener bag on the left side for right-handed users; right side for left-handed users.
4. Load fasteners and layout tools into the designated sleeves and pouches.
5. Verify comfortable reach and adjust placement as needed.

Occidental Leather 8080DB XXL Key Features

• 21 pockets and tool holders
• Hand specific tool holder layout
• Padded two ply nylon bags maintain structure
• Abrasion resistant industrial nylon
• Leather tool holders and corner reinforcement
• Made in USA

Occidental Leather 8080DB XXL Applications

• Framing tasks and general carpentry
• Organizing and carrying essential jobsite tools and fasteners
• Efficient workflow with hand specific pouch layout

Occidental Leather 8080DB XXL Installation Overview

1. Size the Ranger Work Belt to your belt measurement and secure at a comfortable hole.
2. Attach tool and fastener bags and the hammer holder to the belt.
3. Load tools and fasteners into hand specific pockets for your workflow.
4. Check balance and adjust bag positions for comfort and access.

Occidental Leather B5625 XL Features

• Lightweight all-leather set; no break-in required
• Premium top-grain leather in classic black
• Hand-specific tool holders for efficient workflow
• NoSpill holder system keeps tools secure
• Reinforced back walls at stress points for durability
• Side-by-side upper bag and tape mount for quick access
• Made in the USA

Occidental Leather B5625 XL Applications

• Framing and general carpentry
• Fastener and hand tool organization on the jobsite
• Layout and measuring with tape and square access
• Daily professional construction use

Occidental Leather B5625 XL Installation Overview

1. Measure your current tool belt where you wear it over work clothes.
2. Note the buckle hole used, then measure from buckle end to that hole to confirm XL fit.
3. Arrange fastener and tool bags on the belt; position holders as preferred.
4. Buckle at the midpoint hole and adjust for comfort and balance.
5. Load tools, placing frequently used items in the hand-specific holders.