Sort by:
Occidental Leather 5080DBLH LG Description
Updated Pro Framer tool belt set with double outer bag layout for increased storage and workflow efficiency. Built from premium top grain leather with copper rivet reinforcement and a balanced, left handed carry. Includes a built in tape holster and NoSpill tool holder system. Made in USA.
Occidental Leather 5080DBLH LG Includes
- (1) Pro Framer Tool Belt Set
- (1) HD 3 in. Ranger Work Belt
- (1) 3 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 3 Pouch Pro Tool Bag with Tape Holder
Occidental Leather 5080DBLH LG Key Features
- Left handed, hand specific layout
- Premium top grain leather construction
- 12 oz belting leather with steel roller buckle
- Copper rivets reinforce main bags
- NoSpill tool holder system
- Built in tape holster for tapes up to 30 ft
- Pockets and tool holders: 21
- Made in USA
Occidental Leather 5080DBLH LG Applications
- Framing and rough carpentry
- General construction tool carry
- Remodeling and jobsite setup
- Efficient organization of tools and fasteners
- Left handed trades needing balanced access
Occidental Leather 5080DBLH LG Installation Overview
- Measure your current tool belt from buckle end to the used hole to determine belt size.
- Select size to match the midpoint measurement for proper adjustment.
- Position tool bag on dominant left side and fastener bag on right.
- Secure the belt using the steel roller buckle and adjust for comfort.
- Load tools and tapes into the hand specific holders and verify balanced carry.
Occidental Leather 5080DBLH LG Specifications
| Pockets and Tool Holders | 21 |
| Belt Size | Large |
| Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Handedness | Left handed |
| Tool Holder System | NoSpill |
| Built in Tape Holster | Up to 30 ft |
| Components | 5035 Belt, 5060 Fastener Bag, 5012 Hammer Holder, 5018DB Tool Bag |
| Country of Origin | USA |
Occidental Leather 9540 Adjustable Finisher Description
Compact, lightweight finisher tool belt set built for trim, finish work, and light framing. Two-ply foam-core bags keep their shape and the Adjust-to-Fit design quickly adapts for seasonal layers. Hand-specific layouts promote workflow efficiency and D-rings come pre-installed for suspender use.
Includes
- (1) Belt Assembly
- (1) High Mount Hammer Holder
- (2) Oxy Tool Shield (Model 2003)
Key Features
- Hand-specific tool holders for efficient access
- Padded two-ply, foam-core bags maintain shape
- Abrasion-resistant industrial nylon construction
- Adjust-to-Fit belt allows quick sizing changes
- D-rings pre-installed for suspension system compatibility
- Left-handed model available as 9540LH
- Made in USA
Applications
- Finish carpentry setups
- Trim installation
- Light framing tasks
- General jobsite tool and fastener organization
Installation Overview
- Adjust belt to fit over typical work clothing.
- Position left fastener and right tool bags for reach preference.
- Attach the high mount hammer holder at the center back.
- Clip Oxy Tool Shields to bags or belt as needed.
- Load tools and fasteners evenly; connect suspenders to D-rings if used.
Specifications
| Pockets and Tool Holders | 23 |
| Waist Fit | Adjustable, 32 in to 41 in |
| Weight | 3.9 lb (approx.) |
| Material | Industrial nylon with foam-core bags; leather reinforcements |
| Color | Black nylon with brown leather |
| Hammer Holder | High Mount 5059 included |
| Tool Shields | (2) Model 2003 included |
| Made In | USA |
Occidental Leather 9515 Description
A fully adjustable framer tool belt setup pairing the B8017DB tool bag with the patented B8064 fastener bag. Built from industrial nylon with leather reinforcements and high-density neoprene padding, it offers wide hip support, fixed bags that do not slip, and hand-specific organization. Fits pant waist sizes 32 to 41 and includes a removable high mount hammer holder.
Occidental Leather 9515 Includes
- (1) Belt Assembly
- (1) Hammer Holder
Occidental Leather 9515 Features
- Adjustable fit for pant waist 32 to 41
- Fixed bag design prevents shifting
- D rings pre-installed for suspender attachment
- Padded two-ply bags hold their shape
- Extremely abrasion-resistant industrial nylon
- Leather tool holders and corner reinforcement
- Includes High Mount Hammer Holder 5059
- Hand-specific tool placement for efficient workflow
- Left-handed model available as 9515LH
Occidental Leather 9515 Applications
- Framing and rough carpentry
- Jobsite tool and fastener organization
- Use with suspender systems via pre-installed D rings
- Seasonal gear changes requiring belt size adjustment
- Daily professional construction work
Occidental Leather 9515 Installation Overview
- Measure where you wear your tool belt and set belt size to fit 32 to 41 pant waist.
- Position tool bag on dominant side and fastener bag on opposite side.
- Secure the belt and lock the adjust-to-fit crossover system.
- Attach the removable hammer holder and any suspenders to D rings.
- Load tools and fasteners; confirm bags are fixed and balanced.
Occidental Leather 9515 Specifications
| Pockets and Tool Holders | 21 |
| Belt Size Range | Contracts to 32 pant (35 belt); expands to 41 pant (45 belt) |
| Material | Industrial nylon with leather reinforcements |
| Suspension Ready | D rings pre-installed |
| Handed Options | Right-handed 9515; Left-handed 9515LH |
| Weight | 4.1 lb |
| Country of Origin | USA |
| Includes | Belt assembly; High Mount Hammer Holder 5059 |
Occidental Leather 5005 LG Belt Liner with Sheepskin
Premium leather belt liner with 0.75 in plus sheepskin padding for year-round comfort. The wool lining insulates in winter, cools in summer, and wicks moisture for all-day wear. Adjustable straps secure to safety or tool belts up to 3 in wide and require 1 to 2 in of extra belt length. Made in USA.
Includes
- (1) Belt Liner
Key Features
- 0.75 in plus thick sheepskin pads for maximum cushioning
- Wool naturally insulates, cools, and wicks moisture
- Straps adjust to fit belts up to 3 in wide
- Premium leather outer for durability
- Made in USA
Applications
- Adds comfort and padding to tool or safety belts
- Reduces pressure points and edge bite during heavy loads
- Suitable for year-round jobsite wear
- Compatible with most 3 in wide work belts
Installation Overview
- Loosen or remove your existing work belt.
- Position the liner with sheepskin toward the body.
- Thread or buckle the adjustable straps around the belt.
- Tighten evenly; allow 1 to 2 in extra belt length.
- Check fit and make final adjustments for comfort.
Specifications
| Size | Large |
| Mid Range | 41 in |
| Approx. Pant Waist | 36 in to 39 in |
| Overall Length | 48.5 in |
| Material | Leather with sheepskin pad |
| Color | Brown |
| Fits Belt Width | Up to 3 in |
| Country of Manufacture | USA |
| Weight | 1.6 lb |
Occidental Leather 8080DB XXL Description
Lightweight OxyLights framer setup combining industrial nylon with leather reinforcements for durable, efficient tool carry. Hand specific holders, padded two ply bags that keep their shape, and abrasion resistant nylon help streamline framing and carpentry. Made in USA.
Occidental Leather 8080DB XXL Includes
- (1) OxyLights 3 Pouch Tool Bag
- (1) OxyLights 3 Pouch Fastener Bag
- (1) Hammer Holder
- (1) HD 3 in. Ranger Work Belt
Occidental Leather 8080DB XXL Key Features
- 21 pockets and tool holders
- Hand specific tool holder layout
- Padded two ply nylon bags maintain structure
- Abrasion resistant industrial nylon
- Leather tool holders and corner reinforcement
- Made in USA
Occidental Leather 8080DB XXL Applications
- Framing tasks and general carpentry
- Organizing and carrying essential jobsite tools and fasteners
- Efficient workflow with hand specific pouch layout
Occidental Leather 8080DB XXL Installation Overview
- Size the Ranger Work Belt to your belt measurement and secure at a comfortable hole.
- Attach tool and fastener bags and the hammer holder to the belt.
- Load tools and fasteners into hand specific pockets for your workflow.
- Check balance and adjust bag positions for comfort and access.
Occidental Leather 8080DB XXL Specifications
| Pockets and Tool Holders | 21 |
| Belt Size | XXL |
| Weight | 3.8 lbs |
| Material | Leather |
Occidental Leather B5068 Description
All-leather belt-worn calculator case with snap closure. Designed to protect and securely hold most construction calculators while fitting belts up to 3 inches wide. Black finish.
Occidental Leather B5068 Includes
- (1) Case
Occidental Leather B5068 Features
- All-leather construction for long-term durability
- Snap closure secures calculator and allows quick access
- Fits up to a 3 inch work belt
- Compatible with Construction Master models I, II, III, IV and other brands
- Also available as clip-on model B6568
Occidental Leather B5068 Applications
- Jobsite calculator protection and portability
- Belt-mounted storage for quick measurement access
- Secure carry while walking, climbing, or working
Occidental Leather B5068 Installation Overview
- Slide the case onto a belt up to 3 inches wide.
- Insert the calculator into the pouch.
- Close the snap to secure and check fit.
Occidental Leather B5068 Specifications
| Material | All-leather |
| Closure | Snap |
| Belt Fit | Up to 3 inches |
| Compatible Models | Construction Master I, II, III, IV; other brands |
| Dimensions | 3.5 in x 5.5 in x 1.25 in |
| Color | Black |
| Weight | 0.3 lb |
Occidental Leather B5018DB Black Pro Tool Bag Description
Right-hand, all-leather professional tool bag in black with double outer bags and a built-in tape holder for tapes up to 35 ft. Compact yet roomy, it organizes everyday tools like knives, pencils, chisels, torpedo level, and hammer while riding on the right side for quick access.
Occidental Leather B5018DB Includes
- (1) B5018DB Black Pro Tool Bag
Occidental Leather B5018DB Key Features
- Right-side layout for tools most accessed with the right hand
- Integrated tape holster fits up to 35 ft tape
- Double outer bags for added organization
- Durable all-leather construction with reinforced stitching
- Made in the USA
Occidental Leather B5018DB Applications
- Daily carry of carpentry and framing hand tools
- Finish and trim work tool organization
- General construction and remodeling
- Measuring and layout tasks on site
Occidental Leather B5018DB Installation Overview
- Slide the pouch onto your work belt.
- Position on the right side for dominant-hand access.
- Load tools into main and outer pockets; place tape in the holster.
- Adjust belt for comfort and secure fit before use.
Occidental Leather B5018DB Specifications
| Pockets and Tool Holders | 11 |
| Weight | 2.1 lbs |
| Main Tool Bag | 9 x 8 in |
| Outer Bags | 5 x 5.5 in |
| Material | Leather |
| Color | Black |
| Hand Orientation | Right side wear |
| Country of Manufacture | USA |
Occidental Leather 5080LH LG Description
Pro Leather Series left handed framer belt set built from premium top grain leather. Designed for modern builders with hand specific tool holders and 21 pockets for organized performance.
Occidental Leather 5080LH LG Includes
- (1) 5080LH LG Pro Framer Package - Left set
- (1) HD 3 inch Ranger Work Belt
- (1) 3 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 2 Pouch Pro Tool Bag with tape holder
Occidental Leather 5080LH LG Features
- 21 pockets and tool holders
- Premium top grain leather construction
- 12 oz belting leather with steel roller buckle
- Copper rivets reinforce main bags
- NoSpill tool holder system
- Hand specific layout promotes work rhythm
- Made in USA
Occidental Leather 5080LH LG Applications
- Framing and general carpentry
- Fastener and small tool organization on site
- Measuring and layout tasks
- Daily carry for hammers, tapes, and hand tools
Occidental Leather 5080LH LG Installation Overview
- Put the belt on over work clothes where you normally wear it.
- Note the hole used to fasten the belt.
- Measure from the buckle to that hole to determine belt size.
- Load tools into hand specific holders and adjust fit for comfort.
Occidental Leather 5080LH LG Specifications
| Pockets and Tool Holders | 21 |
| Belt Size | Large |
| Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Orientation | Left |
Occidental Leather 8086LHLG Description
Large left handed OxyLights Ultra Framer set combining the B8017DBLH tool bag with the patented B8064LH fastener bag. Leather and industrial nylon construction reduces weight while reinforced corners and dedicated holders keep tools organized.
Occidental Leather 8086LHLG Includes
- (1) 8086LHLG Tool Belt Set
- (1) Belt
- (2) Bags
- (1) Hammer Holder
Occidental Leather 8086LHLG Key Features
- Hand specific tool holders for a left handed layout
- Padded two ply bags maintain shape
- Industrial nylon body for high abrasion resistance
- Leather tool holders with leather reinforced corners
- Seven bag configuration with patented 2-in-1 outer pouch
Occidental Leather 8086LHLG Installation Overview
- Lay your current belt flat and measure from the buckle end to the most used hole.
- Select the belt size whose mid range is closest to that measurement.
- If you do not have a belt, use your approximate mid range waist measurement to choose size.
Occidental Leather 8086LHLG Specifications
| Pockets and Holders | 21 |
| Belt Size | Large |
| Hand | Left Handed |
| Material | Leather and Industrial Nylon |
| Color | Black |
Occidental Leather 1019 Description
Handcrafted from bridle leather, the 1019 All Leather Shoulder Strap adds comfortable carry to totes and gear bags. It features an adjustable shoulder pad and swivel steel clips for quick attachment and smooth movement. The 1" wide strap adjusts from 45" to 57.5" for a tailored fit. Made in USA.
Occidental Leather 1019 Includes
- (1) All Leather Shoulder Strap
Occidental Leather 1019 Key Features
- Bridle leather construction for durability and classic look
- Adjustable shoulder pad for added comfort
- High quality swivel steel clips for easy on and off
- 1" wide strap adjusts 45" to 57.5" to fit most users
- Made in USA
Occidental Leather 1019 Applications
- Add a shoulder carry option to Journeyman's Tote and IronMouth bags
- Upgrade or replace straps on tool bags and carry totes
- Comfortable carry for travel and everyday gear
Occidental Leather 1019 Installation Overview
- Attach each swivel clip to the bag's D-rings or hardware loops.
- Position the shoulder pad at the desired resting point.
- Adjust strap length between 45" and 57.5" for fit.
- Check clips for secure closure before use.
Occidental Leather 1019 Specifications
| Material | Bridle leather |
| Strap Width | 1 inch |
| Adjustable Length | 45 inches to 57.5 inches |
| Hardware | Swivel steel clips |
| Shoulder Pad | Adjustable |
| Country of Origin | USA |
Occidental Leather 9502 Double Clip-On Pouch Description
Twice the capacity with the same clip-on convenience. The Double Clip-On Pouch adds fastener and small tool storage with an integrated leather patch for phone or small tools. Clips to work belts up to 2 in or to a toolbox, and can also subdivide existing main bags. Made in USA.
Occidental Leather 9502 Includes
- (1) Double Clip-On Pouch
Occidental Leather 9502 Key Features
- Dual pouch design for expanded fastener storage
- Leather clip-on patch for phone, notebook, or small tool
- Clips to belts up to 2 in or to toolboxes
- Stores preloaded for fast swap between tasks
- Made in USA
Occidental Leather 9502 Applications
- Carry and organize screws, nails, and small hardware
- Add-on storage for tool belts and rigs
- Subdivide main bags for better organization
- Trim and finish tasks needing compact fastener access
- Jobsite or shop use with toolbox clip-on convenience
Occidental Leather 9502 Installation Overview
- Load pouches with fasteners or small tools as needed.
- Attach the clip to a work belt up to 2 in wide or to a toolbox edge.
- Position for comfortable reach and confirm secure attachment.
- Reposition or remove quickly as tasks change.
Occidental Leather 9502 Specifications
| Main bag | 5 in W x 7 in H |
| Outer bag | 5 in W x 5.5 in H |
| Weight | 0.5 lb |
| Clip-on fit | Up to 2 in work belts |
| Material | Leather and nylon |
| Color | Black |
| Pockets and holders | 2 |
| Country of origin | USA |
Occidental Leather 5500 Electricians Tool Pouch Description
Compact, all leather electricians pouch with organized access to core tools. Features 15 pockets and holders including a flashlight loop, electrical tape chain, quick release tool snap, and heavy duty hammer holder. Tunnel loop mount fits belts up to 3 in. wide. Made in the USA.
Occidental Leather 5500 Includes
- (1) Electricians Tool Pouch
Occidental Leather 5500 Key Features
- All leather construction for durability
- 15 pockets and tool holders for everyday electrical tools
- Flashlight loop, electrical tape chain, and quick release tool snap
- Heavy duty hammer holder
- Tunnel loop mount fits belts up to 3 in. wide
- Made in USA
Occidental Leather 5500 Applications
- Daily electrical service and installation
- Organized belt carry for screwdrivers, pliers, and testers
- Maintenance and facility repair work
- Remodeling and jobsite troubleshooting
Occidental Leather 5500 Installation Overview
- Thread work belt through the tunnel loop; fits up to 3 in. width.
- Load core tools into dedicated pockets and sleeves.
- Attach small tools to the quick release snap as needed.
- Hang electrical tape rolls on the chain for quick access.
- Confirm balance and secure fit before use.
Occidental Leather 5500 Specifications
| Pocket Count | 15 |
| Main Bag Size | 6.5 in x 6 in |
| Material | Leather |
| Belt Fit | Tunnel loop fits belts up to 3 in wide |
| Weight | 1.2 lbs |
| Country of Origin | USA |
| UPC | 759244026900 |
Occidental Leather 5032 Tapered Tool Holster Description
Built from premium all-leather, the 5032 Tapered Tool Holster keeps an ironworker bull pin or a nail bar secure and close at hand. The compact tapered pocket slides onto belts up to 3 in for stable, hands-free access. Handcrafted in the USA for long service life.
Occidental Leather 5032 Includes
- (1) Occidental Leather 5032 Tapered Tool Holster
Occidental Leather 5032 Key Features
- All-leather, USA-made construction for durability
- Versatile fit for bull pins or nail bars
- Tapered pocket helps retain tools and reduce swing
- Slides onto belts up to 3 in wide
- Riveted and stitched for added strength
- Compact design for comfortable all-day wear
- Available in OxyRed and OxyBlack
Occidental Leather 5032 Applications
- Carry and secure an ironworker bull pin
- Belt holster for nail bars and similar prying tools
- Hands-free access during steel erection and layout
- Organize tools on construction and trade job sites
- Minimize tool swing while climbing or moving
Occidental Leather 5032 Installation Overview
- Thread the holster onto a work belt up to 3 in wide.
- Position on preferred side for quick access.
- Insert bull pin or nail bar into the tapered pocket.
- Ensure the tool is seated fully and retained securely.
- Recheck fit after first use and adjust belt position if needed.
Occidental Leather 5032 Specifications
| Model | 5032 |
| Material | Premium leather |
| Construction | All-leather, riveted and stitched |
| Dimensions | 1.75 in W x 6.5 in H |
| Weight | 0.2 lb |
| Belt Fit | Up to 3 in belt |
| Color Options | OxyRed, OxyBlack |
| Origin | Made in USA |
Occidental Leather 6100T LG Description
The Pro Trimmer tool belt setup delivers compact durability for trim, finish, and light framing. Built from premium top grain leather with hand specific tool placement, NoSpill tool holder system, and copper rivet reinforcement, it includes a dedicated tape holster. No holder provided for angle square due to size limitations. Made in USA.
Occidental Leather 6100T LG Includes
- (1) Leather Work Belt
- (2) Pro Trimmer Bags
- (1) Tape Measure Holster
Occidental Leather 6100T LG Features
- Premium top grain leather construction
- Hand specific tool holders for efficient workflow
- Copper rivets reinforce main bags
- NoSpill tool holder system keeps tools secure
- Function engineered for modern builders
- Made in USA
Occidental Leather 6100T LG Applications
- Trim carpentry and finish work
- Light framing tasks
- General jobsite tool organization
Occidental Leather 6100T LG Installation Overview
- Measure current tool belt from buckle end to your most used hole.
- Select the size closest to that measurement; this model is Large.
- Load tools into hand specific holders and secure in NoSpill positions.
- Seat tape in the high mount holster and adjust belt to midpoint hole.
- Verify comfort and accessibility before starting work.
Occidental Leather 6100T LG Specifications
| Material | Premium Top Grain Leather |
| Pockets and Tool Holders | 18 |
| Belt Size | Large |
| Weight | 4.3 lbs |
| Country of Manufacture | USA |
Occidental Leather 5087 LG Description
All leather framing tool belt set configured with tape holder on the left side. Built from premium top grain leather with copper rivet reinforcement and a NoSpill holder system. Hand specific layout delivers efficiency with 21 pockets and holders.
Occidental Leather 5087 LG Includes
- (1) 5087 LG Framing Tool Belt Set
- (1) 5035 HD 3 in. Ranger Work Belt
- (1) 5061 2 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5017DB 3 Pouch Pro Tool Bag
Occidental Leather 5087 LG Key Features
- 21 pockets and tool holders
- Premium top grain leather construction
- 12 oz belting leather with steel roller buckle
- Copper rivets reinforce main bags
- NoSpill tool holder system
- Hand specific layout with tape holder on left
- Function engineered for modern builders
- Made in USA
Occidental Leather 5087 LG Applications
- Framing and general carpentry
- Organized tool and fastener carry on the jobsite
- Outdoor construction environments
- Setups favoring tape holder on the left side
- Daily use by professional trades
Occidental Leather 5087 LG Installation Overview
- Measure your current tool belt from buckle end to used hole to determine size.
- Position tool bag on dominant hand side and fastener bag on opposite side.
- Buckle the 3 in. Ranger belt at midpoint hole and adjust for comfort.
- Load essential tools and fasteners into designated pockets and holders.
- Fine tune bag placement for reach and working rhythm.
Occidental Leather 5087 LG Specifications
| Pockets and Holders | 21 |
| Belt Size | Large |
| Total Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Layout | Tape holder on left side |
| Made In | USA |
Occidental Leather 5087 LG Description
All leather framing tool belt set configured with tape holder on the left side. Built from premium top grain leather with copper rivet reinforcement and a NoSpill holder system. Hand specific layout delivers efficiency with 21 pockets and holders.
Occidental Leather 5087 LG Includes
- (1) 5087 LG Framing Tool Belt Set
- (1) 5035 HD 3 in. Ranger Work Belt
- (1) 5061 2 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5017DB 3 Pouch Pro Tool Bag
Occidental Leather 5087 LG Key Features
- 21 pockets and tool holders
- Premium top grain leather construction
- 12 oz belting leather with steel roller buckle
- Copper rivets reinforce main bags
- NoSpill tool holder system
- Hand specific layout with tape holder on left
- Function engineered for modern builders
- Made in USA
Occidental Leather 5087 LG Applications
- Framing and general carpentry
- Organized tool and fastener carry on the jobsite
- Outdoor construction environments
- Setups favoring tape holder on the left side
- Daily use by professional trades
Occidental Leather 5087 LG Installation Overview
- Measure your current tool belt from buckle end to used hole to determine size.
- Position tool bag on dominant hand side and fastener bag on opposite side.
- Buckle the 3 in. Ranger belt at midpoint hole and adjust for comfort.
- Load essential tools and fasteners into designated pockets and holders.
- Fine tune bag placement for reach and working rhythm.
Occidental Leather 5087 LG Specifications
| Pockets and Holders | 21 |
| Belt Size | Large |
| Total Weight | 5.4 lbs |
| Material | Leather |
| Color | Brown, Tan |
| Layout | Tape holder on left side |
| Made In | USA |
Occidental Leather 8017 Description
The OxyLights 2 Pouch Tool Bag delivers compact, right-side tool organization with 9 pockets and holders. Based on the 8018 design without the tape pocket, it keeps essentials like pencils, work knife, lumber crayon, chisel, torpedo level, and hammer close at hand.
Occidental Leather 8017 Includes
- (1) 8017 OxyLights 2 Pouch Tool Bag
Occidental Leather 8017 Features
- Streamlined 2-pouch layout for focused setups
- Right-side wear for tools accessed with the right hand
- 9 total pockets and holders for common hand tools
- Tape pocket removed for a lighter profile
- Made in USA
Occidental Leather 8017 Applications
- Daily carry of layout and framing essentials
- Organizing chisels, knives, pencils, and level on the job
- Right-side tool access for carpentry and trim work
Occidental Leather 8017 Specifications
| Pockets and Holders | 9 |
| Main Bag | 9 in x 8 in |
| Outer Bag | 6.5 in x 5.5 in |
| Pouch Count | 2 |
| Weight | 1.2 lbs |
| Layout | Right-side wear |
| Country of Origin | USA |
Occidental Leather 6100T LG Description
The Pro Trimmer tool belt setup delivers compact durability for trim, finish, and light framing. Built from premium top grain leather with hand specific tool placement, NoSpill tool holder system, and copper rivet reinforcement, it includes a dedicated tape holster. No holder provided for angle square due to size limitations. Made in USA.
Occidental Leather 6100T LG Includes
- (1) Leather Work Belt
- (2) Pro Trimmer Bags
- (1) Tape Measure Holster
Occidental Leather 6100T LG Features
- Premium top grain leather construction
- Hand specific tool holders for efficient workflow
- Copper rivets reinforce main bags
- NoSpill tool holder system keeps tools secure
- Function engineered for modern builders
- Made in USA
Occidental Leather 6100T LG Applications
- Trim carpentry and finish work
- Light framing tasks
- General jobsite tool organization
Occidental Leather 6100T LG Installation Overview
- Measure current tool belt from buckle end to your most used hole.
- Select the size closest to that measurement; this model is Large.
- Load tools into hand specific holders and secure in NoSpill positions.
- Seat tape in the high mount holster and adjust belt to midpoint hole.
- Verify comfort and accessibility before starting work.
Occidental Leather 6100T LG Specifications
| Material | Premium Top Grain Leather |
| Pockets and Tool Holders | 18 |
| Belt Size | Large |
| Weight | 4.3 lbs |
| Country of Manufacture | USA |
Occidental Leather 9596 Description
All-leather Adjust-to-Fit electrician tool belt system engineered for efficiency and durability. The ergonomic belt fits pant waist sizes 32 to 40 and features hand-specific organization with NoSpill leather holders that mold to your tools. Made in USA.
Occidental Leather 9596 Includes
- (1) 9596 Adjust-to-Fit Pro Electrician Tool Belt Set
Occidental Leather 9596 Key Features
- All-leather construction built for commercial electricians
- Adjust-to-Fit belt fits 32 to 40 inch pant waists
- NoSpill leather holders help prevent tool drops
- Hand-specific layout for fast, efficient access
- Balanced design for all-day comfort
- Made in the USA
Occidental Leather 9596 Applications
- Electrical install and service tasks
- Rough-in and finish wiring work
- Panel, fixture, and device installation
- General jobsite tool and fastener organization
Occidental Leather 9596 Installation Overview
- Measure your current tool belt from the buckle end to the hole you use.
- Select the Adjust-to-Fit range that covers 32 to 40 inch pant waists.
- Position pouches and holders for hand-specific access.
- Cinch belt to a comfortable, balanced fit and verify tool retention.
Occidental Leather 9596 Specifications
| Belt size | Adjustable, fits 32 to 40 inch pant waists |
| Material | All leather |
| Weight | 5.2 lb |
| Country of origin | USA |
| UPC | 759244308105 |
Occidental Leather 9550 Description
Built for framers who value comfort and fast access, the Adjust-to-Fit Pro Framer combines premium leather bags with a rugged nylon belt and wide hip padding. The set includes the 5060 Fastener Bag, 5017DB Tool Bag, and a removable High Mount Hammer Holder for customizable carry. Fully adjustable to fit pant waist sizes 32 to 41 and designed so fixed-position bags will not shift.
Occidental Leather 9550 Includes
- (1) 9550 Adjust-to-Fit Pro Framer Tool Belt
- (1) 5060 Fastener Bag
- (1) 5017DB Tool Bag
- (1) 5059 Removable High Mount Hammer Holder
Occidental Leather 9550 Key Features
- Premium top-grain leather bags with copper-riveted stress points
- Adjust-to-Fit belt for pant waist 32 to 41; locks securely in place
- Rugged commercial nylon belt with high-density neoprene padding
- D rings pre-installed for use with suspension systems
- Hand-specific tool holders for efficient workflow
- Fixed-position bags help prevent shifting
- Made in USA
Occidental Leather 9550 Applications
- Framing and rough carpentry
- General residential and commercial construction
- Remodeling and jobsite service work
- Tool and fastener organization on the go
- Use with suspension systems for extended wear
Occidental Leather 9550 Installation Overview
- Adjust belt to your pant waist size (32 to 41) and secure the crossover system.
- Position the tool bag on your dominant side and fastener bag opposite.
- Attach the removable High Mount Hammer Holder on the rear as desired.
- Clip suspension system to pre-installed D rings if used.
- Load tools and fasteners; confirm bags sit securely without shifting.
Occidental Leather 9550 Specifications
| Pockets and Tool Holders | 21 |
| Waist Fit | 32 to 41 in (Adjust-to-Fit) |
| Fastener Bag - Main | 9 x 8 in |
| Fastener Bag - Outer | 7 x 6 in |
| Fastener Bag - Upper | 5 x 5 in |
| Tool Bag - Main | 9 x 8 in |
| Tool Bag - Outer | 5 x 5.5 in |
| Material | Premium leather bags; rugged commercial nylon belt |
| Weight | 5.1 lbs |
| Included Hammer Holder | 5059 Removable High Mount |
| Made In | USA |
Occidental Leather 9521 Oxy Finisher Tool Bag Description
Compact OxyFinisher tool bag built for trim, light framing, and finish work. Two-ply foam-core nylon with leather reinforcements keeps a round-bottom shape whether empty or loaded. Includes a metal hammer loop and an Oxy Tool Shield for safe carry of sharp tools. Made in USA.
Includes
- (1) Occidental Leather 9521 Oxy Finisher Tool Bag
- (1) 2003 Oxy Tool Shield
Key Features
- 12 pockets and tool holders in a compact, jobsite-efficient layout
- Two-ply foam-core construction maintains structure when empty or loaded
- Clip-on leather tab for tape or accessory pouches
- Steel hammer loop; interior leather tool sleeves
- Right-hand layout; left-hand model available as 9521LH
Applications
- Trim carpentry and finish work
- Light framing tasks
- Cabinetry and punch-list work
- Right-side tool carry for dominant-hand access
Installation Overview
- Slide the bag onto a compatible work belt.
- Position on the right side for standard orientation.
- Attach clip-on leather tab accessories as needed.
- Insert the Oxy Tool Shield for chisels or knives.
- Load tools and check balance and access.
Specifications
| Pockets and Tool Holders | 12 |
| Main Bag | 9.5 in W x 7.5 in H |
| Outer Bag | 6.5 in W x 5.5 in H |
| Weight | 1.0 lb |
| Material | Two-ply foam-core nylon with leather components |
| Orientation | Right-hand; Left-hand model 9521LH available |
| Country of Origin | USA |
Occidental Leather 6568 Description
All leather clip on case with snap closure protects and securely holds your calculator. Designed to fit Construction Master models I, II, III, IV, and other brands; also fits select small cell phones. Made in USA.
Occidental Leather 6568 Includes
- (1) Clip on calculator case
Occidental Leather 6568 Key Features
- All leather construction for durability
- Secure snap closure
- Clip on design for belt or pocket carry
- Fits Construction Master models I, II, III, IV and other brands
- Also available as belt worn model 5068
- Made in USA
Occidental Leather 6568 Applications
- Protecting calculators on the jobsite
- Hands free carry clipped to belt or pocket
- Field measurements and quick calculations
- Organized storage in tool belts and bags
Occidental Leather 6568 Installation Overview
- Insert calculator into the case.
- Close the snap to secure.
- Attach the clip to belt or pocket edge.
- Check that the case is seated firmly before use.
Occidental Leather 6568 Specifications
| Material | Leather |
| Closure | Snap |
| Dimensions | 3.5 x 5.5 x 1.25 in |
| Weight | 0.3 lb |
| Fits Models | Construction Master I, II, III, IV and other brands |
| UPC | 759244129403 |
Occidental Leather 5053 Description
Purpose built for electricians, this compact all-leather pocket caddy keeps essential tools organized for estimating, troubleshooting, trim out and service work. It provides five total pockets and holders, including an oversized slot for most compact test meters, and a snap loop to hang over belts up to 2 inches wide.
Occidental Leather 5053 Includes
- (1) Electrician's Pocket Caddy 5053
Occidental Leather 5053 Key Features
- Five pockets and tool holders in a compact layout
- Dedicated test meter pocket fits most compact testers
- Snap loop carry hangs over belts up to 2 inches wide or carry standalone
- All-leather, professional grade construction
- Made in USA
Occidental Leather 5053 Applications
- Estimating and inspections
- Troubleshooting and service calls
- Trim-out and finish electrical tasks
Occidental Leather 5053 Installation Overview
- Open snap loop and place over a belt up to 2 inches wide or carry by hand.
- Seat the caddy against the belt and close the snap securely.
- Load tools into the five pockets, placing the test meter in the larger pocket.
- Verify all tools are seated and the snap is fully engaged before use.
Occidental Leather 5053 Specifications
| Material | All-leather |
| Pockets and Holders | 5 |
| Belt Compatibility | Up to 2 in wide |
| Weight | 0.7 lb |
| UPC | 759244160505 |
| Country of Origin | USA |
| Model | 5053 |
Occidental Leather 5028 Single Snip Holster Description
Compact full-grain leather holster originally built for steel framing. Sized for common WISS snips and other small tools, it offers a rigid, low-swing carry that can also serve as a no-swing hammer alternative. Slides onto belts up to 3 inches wide. Made in USA.
Occidental Leather 5028 Includes
- (1) Single Snip Holster
Occidental Leather 5028 Features
- Full-grain leather construction holds shape and resists wear
- Designed for snips; fits many small hand tools
- No-swing hammer alternative for rigid carry
- Secure belt fit on belts up to 3 inches wide
- Compatible with WISS snips (M1, M2, M3; WS series)
- Handcrafted in the USA
Occidental Leather 5028 Applications
- Carry aviation snips for steel framing tasks
- Organize small hand tools on a tool belt
- Use as a rigid, low-swing hammer holder
- General jobsite tool access on belts up to 3 inches
Occidental Leather 5028 Installation Overview
- Slide the holster onto a belt up to 3 inches wide.
- Position at preferred carry location.
- Insert snips or tool fully into the pocket.
- Verify secure fit before use.
Occidental Leather 5028 Specifications
| Material | Full-grain leather |
| Dimensions | 2.75 in W x 5.5 in H |
| Belt Compatibility | Up to 3 in wide |
| Weight | 0.3 lb |
| Country of Origin | USA |
