Occidental Leather
Occidental Leather B5080DBLH LG Pro Framer Set - Black
Occidental Leather B5080DBLHLG Description
The Pro Leather Series Pro Framer set delivers a hand-specific layout with premium top-grain leather, copper-riveted stress points, and the NoSpill tool holder system for secure, high-efficiency carry. This Large, left-hand setup provides 22 total pockets and holders for organized workflow in demanding jobsite conditions.
Includes
- (1) Pro Framer Tool Belt Set (B5080DBLHLG)
- (1) HD 3" Ranger Work Belt
- (1) 3 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 3 Pouch Pro Tool Bag with Tape Holder
Key Features
- 22 pockets & tool holders for comprehensive capacity
- Premium top-grain leather construction built for heavy outdoor use
- Hand Specific™ tool placement to maximize working rhythm
- Copper rivets reinforce primary stress areas
- NoSpill tool holder system keeps tools secure and accessible
- Function-engineered layout for modern builders
Applications
- Framing and rough carpentry
- General construction and remodeling
- Deck building and exterior work
- Finish prep and punch list tasks
- Jobsite tool and fastener organization
Installation Overview
- Select correct belt size and position over typical workwear.
- Thread the belt through bag tunnels and the hammer holder.
- Place fastener and tool bags on the preferred sides for left-hand use.
- Buckle the belt and adjust for snug, comfortable support.
- Load tools and verify balance and access; re-adjust placement as needed.
Specifications
| Pockets & Tool Holders | 22 |
| Belt Size | Large |
| Weight | 5.3 lbs |
| Material | Leather (top-grain) |
| Color | Black, Tan accents |
| Orientation | Left-hand |
NOTE: Leather is tanned for rugged outdoor use; maintain with proper cleaning and conditioning for best longevity.
Occidental Leather B5080DBLH LG Pro Framer Set - Black
Left-hand Pro Framer leather belt set, Large
✓ 22 pockets & tool holders for organized storage
✓ Premium top-grain leather built for rugged durability
✓ Hand Specific™ layout maximizes working rhythm
✓ Copper-riveted main bags at key stress points
✓ NoSpill™ tool holder system keeps tools secure
2 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Leather Care
- Brush off jobsite grit daily; wipe with a damp cloth if muddy.
- Shake out debris from bags and pouches regularly.
- For deeper cleaning, use mild soap and water only; let dry naturally.
- About once a year, clean with saddle soap or mild leather cleaner, then apply a small amount of non?oil?based leather conditioner.
- Store dry and out of direct sunlight.
- Avoid oil?based products; they can weaken stitching. Wipe off mud, concrete, or drying compounds before they dry.
- 22 Pockets & Holders — Organized capacity without bulk
- Top-Grain Leather — Premium durability for heavy outdoor use
- Hand Specific™ Layout — Optimized placement for working rhythm
- NoSpill Holders — Secure tool and fastener retention
- Copper-Riveted Stress Points — Reinforced longevity
- Belt Size: Large
- Weight: 5.3 lbs
- Material: Leather
- Color: Black, Tan
More About Occidental Leather B5080DBLH LG Pro Framer Set - Black
Occidental Leather B5080DBLHLG Description
The Pro Leather Series Pro Framer set delivers a hand-specific layout with premium top-grain leather, copper-riveted stress points, and the NoSpill tool holder system for secure, high-efficiency carry. This Large, left-hand setup provides 22 total pockets and holders for organized workflow in demanding jobsite conditions.
Includes
- (1) Pro Framer Tool Belt Set (B5080DBLHLG)
- (1) HD 3" Ranger Work Belt
- (1) 3 Pouch Pro Fastener Bag
- (1) Hammer Holder
- (1) 3 Pouch Pro Tool Bag with Tape Holder
Key Features
- 22 pockets & tool holders for comprehensive capacity
- Premium top-grain leather construction built for heavy outdoor use
- Hand Specific™ tool placement to maximize working rhythm
- Copper rivets reinforce primary stress areas
- NoSpill tool holder system keeps tools secure and accessible
- Function-engineered layout for modern builders
Applications
- Framing and rough carpentry
- General construction and remodeling
- Deck building and exterior work
- Finish prep and punch list tasks
- Jobsite tool and fastener organization
Installation Overview
- Select correct belt size and position over typical workwear.
- Thread the belt through bag tunnels and the hammer holder.
- Place fastener and tool bags on the preferred sides for left-hand use.
- Buckle the belt and adjust for snug, comfortable support.
- Load tools and verify balance and access; re-adjust placement as needed.
Specifications
| Pockets & Tool Holders | 22 |
| Belt Size | Large |
| Weight | 5.3 lbs |
| Material | Leather (top-grain) |
| Color | Black, Tan accents |
| Orientation | Left-hand |
NOTE: Leather is tanned for rugged outdoor use; maintain with proper cleaning and conditioning for best longevity.
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
