Occidental Leather
Occidental Leather 8087 XXL OxyLights Driver Set
Occidental Leather 8087 XXL OxyLights Driver Set Description
The OxyLights Driver Set in XXL blends abrasion-resistant industrial nylon with leather reinforcements to keep weight down while standing up to metal framing, finish carpentry, and remodeling. The right-side 8068 gun/finisher bag includes a holster for impact or screw guns, while the left-side B8064 fastener bag offers a double outer pouch layout for fasteners and layout tools. Made in the USA.
Includes
- (1) Occidental Leather 8087XXL OxyLights Driver Tool Belt Set
- (1) 5035 HD 3" Ranger Leather Work Belt
- (1) 8064 OxyLights Fastener Bag with Double Outer Bag
- (1) 5020 2-in-1 Tool & Hammer Holder
- (1) 8068 Impact/Screw Gun and Drill Bag
Key Features
- 20 pockets & tool holders for organized storage
- Hand-specific holder layout; padded two-ply bags hold their shape
- Industrial nylon with leather tool holders & reinforced corners
- Right-side gun/finisher holster fits impact or screw guns
- Lightweight, jobsite-tough construction — Made in the USA
Applications
- Metal stud framing and fastening
- Finish carpentry layout and installation
- Remodeling and punch-list tasks
- General fastening and tool organization on site
Installation Overview
- Select correct size (XXL) and adjust the 5035 Ranger belt for a centered buckle fit.
- Position 8068 gun bag on the right and B8064 fastener bag on the left as preferred.
- Secure the 5020 2-in-1 Tool & Hammer Holder at the rear or side for balance.
- Load tools and fasteners; distribute weight evenly between bags.
- Re-check fit and retighten belt after loading.
Specifications
| Pockets & Tool Holders | 20 |
| Belt Size | XXL |
| Weight | 4.1 lbs |
| Materials | Leather, industrial nylon |
| Color | Black/Tan with leather accents |
| Components | 5035 belt; 8064 fastener bag; 5020 2-in-1 holder; 8068 gun/drill bag |
| Hand | Right-hand setup (left-hand model not offered) |
| Country of Origin | USA |
Occidental Leather 8087 XXL OxyLights Driver Set
XXL OxyLights driver tool belt set with 20 pockets
✓ XXL size with HD 3" Ranger leather belt
✓ 20 pockets/tool holders for organized carry
✓ Right-side gun holster for impact/screw guns
✓ Leather-reinforced nylon bags hold shape
✓ Made in USA
2 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Nylon Gear Care
- Brush off grit daily and wipe with a damp cloth; air dry.
- Shake out interior debris periodically.
- Avoid prolonged sun exposure and harsh chemicals.
- For heavy grime, clean with mild soap and water.
- Store in a cool, dry place.
Minor Abrasion/Tear Tips
- Seal small areas with nylon repair tape or a fabric patch; ensure the surface is clean and dry.
- For extra strength, stitch over the patched area with heavy-duty thread.
Catch minor damage early to prevent failures in high?stress areas such as seams, corners, and straps.
- Gun/Finisher holster – Fits impact drivers or screw guns
- Multi-pouch fastener bag for fasteners and layout tools
- Padded two-ply bags maintain shape under load
- Leather-reinforced corners & holders for durability
- Industrial nylon + leather construction keeps weight down
- Pockets & Tool Holders: 20
- Belt Size: XXL
- Weight: 4.1 lbs
- Components: 5035 belt; 8064 fastener bag; 5020 2-in-1 holder; 8068 gun/drill bag
- Made in the USA
More About Occidental Leather 8087 XXL OxyLights Driver Set
Occidental Leather 8087 XXL OxyLights Driver Set Description
The OxyLights Driver Set in XXL blends abrasion-resistant industrial nylon with leather reinforcements to keep weight down while standing up to metal framing, finish carpentry, and remodeling. The right-side 8068 gun/finisher bag includes a holster for impact or screw guns, while the left-side B8064 fastener bag offers a double outer pouch layout for fasteners and layout tools. Made in the USA.
Includes
- (1) Occidental Leather 8087XXL OxyLights Driver Tool Belt Set
- (1) 5035 HD 3" Ranger Leather Work Belt
- (1) 8064 OxyLights Fastener Bag with Double Outer Bag
- (1) 5020 2-in-1 Tool & Hammer Holder
- (1) 8068 Impact/Screw Gun and Drill Bag
Key Features
- 20 pockets & tool holders for organized storage
- Hand-specific holder layout; padded two-ply bags hold their shape
- Industrial nylon with leather tool holders & reinforced corners
- Right-side gun/finisher holster fits impact or screw guns
- Lightweight, jobsite-tough construction — Made in the USA
Applications
- Metal stud framing and fastening
- Finish carpentry layout and installation
- Remodeling and punch-list tasks
- General fastening and tool organization on site
Installation Overview
- Select correct size (XXL) and adjust the 5035 Ranger belt for a centered buckle fit.
- Position 8068 gun bag on the right and B8064 fastener bag on the left as preferred.
- Secure the 5020 2-in-1 Tool & Hammer Holder at the rear or side for balance.
- Load tools and fasteners; distribute weight evenly between bags.
- Re-check fit and retighten belt after loading.
Specifications
| Pockets & Tool Holders | 20 |
| Belt Size | XXL |
| Weight | 4.1 lbs |
| Materials | Leather, industrial nylon |
| Color | Black/Tan with leather accents |
| Components | 5035 belt; 8064 fastener bag; 5020 2-in-1 holder; 8068 gun/drill bag |
| Hand | Right-hand setup (left-hand model not offered) |
| Country of Origin | USA |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
