$99 or Less

Occidental Leather 5026 Key Features

• Quick clip point for tape measures, clip on pouches and meters
• Fits belts up to 3 inches; accepts clips up to 1 inch
• Leather loop with steel rectangular ring for durability
• Compact add on for any tool belt
• Made in USA

Occidental Leather 5026 Applications

• Attach tape measures to your belt
• Hang small clip on bags or meter cases
• Add an extra hook point to existing tool belts
• Organize frequently used clip on tools

Occidental Leather 5026 Installation Overview

1. Slide the loop onto a work belt up to 3 inches wide.
2. Position where convenient on your belt.
3. Attach clip on tools or accessories with clips up to 1 inch wide.

Occidental Leather 5019 Features

• All-leather construction for durability
• Clean interior with no tool holders or dividers
• Compact size suited for fasteners and small tools
• Made in USA
• Riveted and stitched for strength

Occidental Leather 5019 Applications

• Carry loose fasteners on the job
• Store small hand tools or accessories
• Add-on third bag for tool belt systems
• General utility storage for carpentry or trade work

Occidental Leather 5019 Installation Overview

1. Slide pouch onto compatible work belt or mount per your rig setup.
2. Position for comfortable reach and balance.
3. Load with fasteners or small tools; avoid overfilling.
4. Check stitching and rivets periodically for wear.

Occidental Leather 5068 Key Features

• All-leather construction with reinforced stitching
• Snap closure keeps contents secure
• Belt-worn design fits 1 to 3 inch wide belts
• Compatible with Construction Master I–IV and other calculators
• Made in USA

Occidental Leather 5068 Applications

• Protecting calculators on the jobsite
• Hands-free belt carry for quick access
• Holding similarly sized devices or phones

Occidental Leather 5068 Installation Overview

1. Slide the belt loop over a 1 to 3 inch wide work belt.
2. Insert the calculator into the pouch.
3. Close the snap to secure the contents.
4. Position on belt for comfortable access.

Occidental Leather 5156 Key Features

• Steel cradle style holder for secure hammer carry
• 2 in. belt slot sized for narrow belts
• Steel hardware riveted to extra heavy leather back
• Compatible with 2 in. Leather Work Belt 5002 and Stronghold Beltless rear strap
• Made in the USA

Occidental Leather 5156 Applications

• Secure hammer carry on 2 in. belts
• Framing and carpentry belt setups
• Use with beltless suspenda style rear straps
• General construction and remodeling

Occidental Leather 5156 Installation Overview

1. Thread a 2 in. belt through the two vertical slots.
2. Position holder at desired location on the belt or rear strap.
3. Tighten belt and ensure the holder sits flat against your side.
4. Insert hammer into steel cradle and check for secure fit.

Occidental Leather 8567 Key Features

• Right-hand layout
• Fits a 3 in belt
• Hybrid construction: industrial nylon body with leather reinforcement
• 4 pockets and holders for drill, bits, and small tools
• Compatible with select Bosch, Hitachi, Makita, and Milwaukee compact drills and drivers
• Made in USA

Occidental Leather 8567 Applications

• Hands-free carry of cordless drills and impact drivers
• Bit and small fastener organization on the belt
• Framing, punch-out, and general construction tasks

Occidental Leather 8567 Installation Overview

1. Slide the holster onto a work belt up to 3 inches wide.
2. Secure the leather strap/snaps as designed.
3. Place the drill or driver in the main pocket.
4. Store bits and small tools in the exterior sleeves.

Occidental Leather 9504 Key Features

• Cost efficient organization for small tools and fasteners
• Seven-pocket, multi-pouch design with holders for pencil, utility knife, and angle square
• Heavy-duty clip attaches quickly to belts or waistbands
• Fits belts up to 2 inches wide
• Made in USA

Occidental Leather 9504 Applications

• Small repairs and punch list tasks
• Trim and finish work
• General maintenance rounds
• Weekend DIY projects

Occidental Leather 9504 Installation Overview

1. Load tools and fasteners into main and outer pockets.
2. Clip the pouch to your belt or waistband.
3. Ensure clip is fully engaged; adjust placement for comfort.

Occidental Leather 5028 Features

• Full-grain leather construction holds shape and resists wear
• Designed for snips; fits many small hand tools
• No-swing hammer alternative for rigid carry
• Secure belt fit on belts up to 3 inches wide
• Compatible with WISS snips (M1, M2, M3; WS series)
• Handcrafted in the USA

Occidental Leather 5028 Applications

• Carry aviation snips for steel framing tasks
• Organize small hand tools on a tool belt
• Use as a rigid, low-swing hammer holder
• General jobsite tool access on belts up to 3 inches

Occidental Leather 5028 Installation Overview

1. Slide the holster onto a belt up to 3 inches wide.
2. Position at preferred carry location.
3. Insert snips or tool fully into the pocket.
4. Verify secure fit before use.

Occidental Leather 9008 Key Features

• High density cushion technology for hip comfort
• Light weight pads retrofit quickly to existing belt sets
• Accepts any bag up to 7.5 in wide
• Does not accommodate the 5525 Big Oxy Fastener Bag or B5611 Green Building Fastener Bag
• Made in the USA

Occidental Leather 9008 Applications

• Increase hip comfort on heavy tool belt setups
• Retrofit comfort upgrade for existing Occidental or other belt worn systems
• Use with compatible tool bags up to 7.5 in wide

Occidental Leather 9008 Installation Overview

1. Remove tool bags from your belt.
2. Slide a Hip Buddy onto each side of the belt at the hip locations.
3. Reinstall tool bags ensuring each is 7.5 in wide or less.
4. Adjust position for comfort and secure all attachments.

Occidental Leather 9502 Key Features

• Dual pouch design for expanded fastener storage
• Leather clip-on patch for phone, notebook, or small tool
• Clips to belts up to 2 in or to toolboxes
• Stores preloaded for fast swap between tasks
• Made in USA

Occidental Leather 9502 Applications

• Carry and organize screws, nails, and small hardware
• Add-on storage for tool belts and rigs
• Subdivide main bags for better organization
• Trim and finish tasks needing compact fastener access
• Jobsite or shop use with toolbox clip-on convenience

Occidental Leather 9502 Installation Overview

1. Load pouches with fasteners or small tools as needed.
2. Attach the clip to a work belt up to 2 in wide or to a toolbox edge.
3. Position for comfortable reach and confirm secure attachment.
4. Reposition or remove quickly as tasks change.

Occidental Leather 9503 Key Features

• Angle square holster for quick access
• Single clip-on, large capacity main bag
• Attaches to belts or waistbands for grab-and-go use
• Industrial nylon construction
• Made in USA

Occidental Leather 9503 Applications

• Carry nails, screws, and small hand tools
• Light-duty service calls and punch-list tasks
• DIY and weekend project setups
• Quick add-on storage to existing work belts

Occidental Leather 9503 Installation Overview

1. Clip the pouch onto a belt or waistband.
2. Seat the angle square in the holster slot.
3. Load fasteners or small tools into the main bag.
4. Verify secure attachment before use.

Occidental Leather 5057 Features

• 4 pocket layout keeps small tools separated and easy to grab
• Premium leather construction with reinforced stitching
• In pocket carry or snap loop for belt use
• Fits most belts up to 2.5 inches wide
• Lightweight, compact design for everyday tasks
• Made in USA

Occidental Leather 5057 Applications

• Small repairs and service calls
• Electrical and shop maintenance
• Gardening and farm upkeep
• Cabinet and finish work

Occidental Leather 5057 Installation Overview

1. Load tools into the four pockets as needed.
2. Place the caddy in a front or rear pocket, or
3. Attach via the snap loop to a belt up to 2.5 inches wide.
4. Adjust position for comfortable access and secure carry.

Key Features

• Chemically neutral, salt-free formula safe for full-grain leather
• Penetrates leather fibers to inhibit oxidation and extend life
• Waterproofs, restores, and protects leather gear
• Natural ingredients: triple filtered beeswax, seed oils, and lipids
• Made in the USA

Applications

• Conditioning and maintaining Occidental Leather tool belts, bags, and pouches
• Waterproofing and protecting most other full-grain leather goods
• Reducing cracking, drying, and stitching damage from harsh use
• Not for use on suede or nubuck

Installation Overview

1. Clean leather; wipe off dirt and debris.
2. Apply a small amount with a clean cloth in circular motions until coated.
3. Allow cream to absorb; buff off any excess.
4. Repeat as needed for heavily worn areas.
5. Test on a small area first; do not use on suede or nubuck.

Occidental Leather 5032 Key Features

• All-leather, USA-made construction for durability
• Versatile fit for bull pins or nail bars
• Tapered pocket helps retain tools and reduce swing
• Slides onto belts up to 3 in wide
• Riveted and stitched for added strength
• Compact design for comfortable all-day wear
• Available in OxyRed and OxyBlack

Occidental Leather 5032 Applications

• Carry and secure an ironworker bull pin
• Belt holster for nail bars and similar prying tools
• Hands-free access during steel erection and layout
• Organize tools on construction and trade job sites
• Minimize tool swing while climbing or moving

Occidental Leather 5032 Installation Overview

1. Thread the holster onto a work belt up to 3 in wide.
2. Position on preferred side for quick access.
3. Insert bull pin or nail bar into the tapered pocket.
4. Ensure the tool is seated fully and retained securely.
5. Recheck fit after first use and adjust belt position if needed.

Occidental Leather 5010 Features

• 1 inch wide leather loop supports a safety release snap
• Ideal for saw keys, small wrenches, and similar items
• Keeps frequently used tools within easy reach
• Durable leather construction
• Made in USA

Occidental Leather 5010 Applications

• Hang keys, small wrenches, and accessories from a belt or bag
• Add quick access clip point to tool belts or pouches
• Organize frequently used small tools on the jobsite

Occidental Leather 5010 Installation Overview

1. Slide the leather loop onto your belt, strap, or D ring.
2. Secure the loop so the snap hangs freely.
3. Clip keys or small tools to the safety release snap.
4. Verify the snap opens and closes smoothly before use.

Occidental Leather B9019 Key Features

• Compact single-compartment pouch for fast access
• Padded, double wall industrial nylon for structure and durability
• Lightweight design suited for small jobs or as a third bag
• Slides onto work belts; compatible up to 3 in. belts
• Made in the USA

Occidental Leather B9019 Applications

• Carry fasteners, parts, or small hand tools
• Add-on storage for tool belt systems
• Service calls and light-duty tasks
• Organizing essentials for trim or punch list work

Occidental Leather B9019 Installation Overview

1. Thread the bag onto your work belt (fits up to 3 in.).
2. Position at preferred location for access.
3. Load with small tools, fasteners, or parts.
4. Check balance and adjust as needed on the belt.

Occidental Leather 5044 Features

• Adds 10 inches of length to suspenders
• Pair of straps for quick fit extension
• Compatible with 5009 and 5055 suspenders and suspension systems
• Made in USA

Occidental Leather 5044 Applications

• Extend suspender reach for larger builds
• Improve fit over bulky clothing or winter layers
• Fine-tune suspension system comfort

Occidental Leather 5044 Installation Overview

1. Identify attachment points on your 5009 or 5055 suspenders.
2. Clip each extension to the suspender ends.
3. Adjust overall length for a comfortable fit.
4. Confirm secure attachment before use.

Occidental Leather 9005 Features

• Provides extra lower back support on tool belts
• Slides under a third bag or hammer holder
• High density foam pad with polyethylene stiffener
• Durable industrial nylon cover
• Made in USA

Occidental Leather 9005 Applications

• Add support and comfort to existing work belts
• Use beneath a third bag or hammer loop without interference
• Stabilize belt load during heavy tool carry
• Retrofit for most professional tool belt systems

Occidental Leather 9005 Installation Overview

1. Slide the Belt Buddy onto your work belt at the rear center.
2. Position so it sits comfortably at the lower back.
3. Attach a third bag or hammer holder over the pad if desired.
4. Tighten belt and adjust for support and fit.

Occidental Leather 9025 Key Features

• Compact 6-in-1 design combines pockets and holders
• Padded nylon fastener bag for added capacity
• Holds tape, hammer, knife or chisel, pencils and fasteners
• Space-saving add-on for tool belts or vests
• Ideal for trim, punch list, and small tasks

Occidental Leather 9025 Applications

• Carry essentials for quick service calls
• Trim and finish work where a light setup is needed
• Punch list tasks and small repairs
• Supplemental pouch for tool belts or vests

Occidental Leather 5009K Features

• Direct belt attachment for suspenders
• Works with Occidental models 5009 and 1546
• Hardware and instructions included for installation
• Designed for retrofitting additional belt sets
• Made in the USA

Occidental Leather 5009K Applications

• Attach suspenders directly to existing tool belts
• Create secure belt loops for suspender connection
• Upgrade or replace attachment hardware on belt systems

Occidental Leather 5009K Installation Overview

1. Identify attachment points on the belt per the guide.
2. Prepare holes at marked locations if required.
3. Position hardware and fasten using included rivets and washers.
4. Install rings and clips, then secure firmly.
5. Check alignment and fit; adjust for comfort.

Occidental Leather 5023B Key Features

• Two-pouch leather bag with open, holder-free layout
• Durable full-leather construction for long service life
• Streamlined design for fasteners and small tools
• Made in the USA
• Lightweight and compact for everyday carry

Occidental Leather 5023B Applications

• Fastener storage for carpentry and framing
• Small tool organization for service and maintenance
• Trim and finish work where a compact pouch is preferred
• General jobsite use with minimal bulk

Occidental Leather 5023B Installation Overview

1. Place the pouch on your work belt or system per your preferred layout.
2. Load fasteners or small tools into the main and outer pockets.
3. Adjust placement for comfortable access during work.

Occidental Leather 5518 Features

• Long sleeve style keeps tools upright and close to the body
• Reduces tool swing to avoid knee capping
• Heavy duty full leather construction
• Fits belts up to 3 in wide
• Made in the USA

Occidental Leather 5518 Applications

• Carry and secure framing or finish hammers
• Holster for hammer tackers on the jobsite
• Flat bar storage up to 1-5/8 in diameter
• Reduce tool sway while climbing or walking
• Add a hammer sleeve to any 3 in belt

Occidental Leather 5518 Installation Overview

1. Slide the holder onto a work belt up to 3 in wide.
2. Position the sleeve where the tool is easy to reach.
3. Insert the hammer, tacker, or flat bar handle into the sleeve.
4. Confirm the tool sits securely and does not swing.
5. Tighten belt as needed for stable carry.

Occidental Leather 6568 Key Features

• All leather construction for durability
• Secure snap closure
• Clip on design for belt or pocket carry
• Fits Construction Master models I, II, III, IV and other brands
• Also available as belt worn model 5068
• Made in USA

Occidental Leather 6568 Applications

• Protecting calculators on the jobsite
• Hands free carry clipped to belt or pocket
• Field measurements and quick calculations
• Organized storage in tool belts and bags

Occidental Leather 6568 Installation Overview

1. Insert calculator into the case.
2. Close the snap to secure.
3. Attach the clip to belt or pocket edge.
4. Check that the case is seated firmly before use.

Occidental Leather 8003 SM Key Features

• 3 in. padded industrial nylon belt body for comfort and support
• 2 in. heavy leather tongue with nickel plated steel roller buckle
• Lightweight design reduces fatigue during long wear
• Works with most tool bags and suspenders
• Made in USA

Occidental Leather 8003 SM Applications

• Foundation belt for building custom tool rig setups
• Daily jobsite tool carry for tradespeople
• Use with suspenders for added load distribution
• Compatible base for professional tool and fastener bags

Occidental Leather 8003 SM Installation Overview

1. Measure your current tool belt from buckle end to the hole used to determine belt size.
2. Select size Small if your midpoint measurement is 34 in. (approx. pant waist 29 in. to 32 in.).
3. Thread the leather tongue through the roller buckle and secure at a comfortable hole.
4. Attach compatible tool and fastener bags to the belt body as needed.
5. Optional: connect suspenders to distribute weight.

Occidental Leather 8505 Features

• Clip-on mount attaches to belt or pocket for quick access
• 4 tool pockets sized for knife, pencils, and 35 ft tape
• FatMax compatible tape pocket
• Ultra-lightweight at 0.2 lbs for all-day comfort
• Durable nylon with leather reinforcement; made in USA

Occidental Leather 8505 Applications

• Carry and organize measuring tape, utility knife, and pencils
• Quick tool access on belt or pocket during layout and marking
• Jobsite or shop use where compact organization is needed

Occidental Leather 8505 Installation Overview

1. Clip the holder onto your belt or pocket.
2. Place tape measure, knife, and pencils into designated pockets.
3. Confirm the clip is secure and pockets are seated.
4. Adjust tool placement for comfortable reach.