$99 or Less

Occidental Leather 5031 Key Features

• Belt-worn utility attachment for spring-snap tools
• Fits up to a 3 inch work belt
• 3/4 inch dee ring for secure clipping
• Leather strap construction for durability
• Snap closure secures around belt
• Made in USA

Occidental Leather 5031 Applications

• Carry telephone butt-sets and testers from a belt
• Attach meters, small tools, or lanyards via spring snaps
• Add a quick-access ring point to tool belts
• Organize clip-on accessories for electricians and technicians
• Temporary attachment point for keys or ID holders on the job

Occidental Leather 5031 Installation Overview

1. Open the strap and place it around your work belt.
2. Position the dee ring where you want access.
3. Snap the closure to secure the strap to the belt.
4. Attach the spring snap from your tool or lanyard to the dee ring.
5. Confirm the snap and ring are fully engaged before use.

Occidental Leather 5025 Features

• Fits pliers, side cutters, crimpers, and plumb bobs
• Open-bottom design for longer tools and debris release
• Full-grain leather construction for durability
• Compact profile with minimal bulk on belt
• Made in the USA

Occidental Leather 5025 Applications

• Keep pliers and cutters accessible on the job
• Hold plumb bobs for surveying and layout work
• Organize essential hand tools on a work belt
• Daily use for electricians, framers, and general trades

Occidental Leather 5025 Installation Overview

1. Thread holster onto your work belt and position as desired.
2. Insert tool fully into the holster.
3. Confirm secure fit and comfortable access before use.

Occidental Leather 9020B Features

• Extra heavy 2 in wide nylon straps
• Front and rear adjustment; non-stretch for secure support
• Heavy harness leather rear spreader for durability
• Quality super heavy clamps attach to belt or waistband
• Black color

Occidental Leather 9020B Applications

• Support and stabilize tool belts during daily work
• Hold up pants securely on the jobsite
• Distribute load weight to reduce hip and lower back strain
• Clip to work belts or waistband using heavy-duty clamps

Occidental Leather 9020B Installation Overview

1. Attach each clamp to your waistband or tool belt evenly spaced.
2. Place straps over shoulders with the leather spreader centered on your back.
3. Adjust front and rear sliders for a comfortable, balanced fit.
4. Confirm clamps are secure and straps are not twisted before use.

Occidental Leather 5045 Key Features

• Converts Beltless systems to fit larger body sizes
• 10 inch straps add about 5 inches to suspender length
• Back strap adds up to 6 inches between bags
• Durable leather and nylon construction
• Made in USA

Occidental Leather 5045 Applications

• Extend Beltless suspenders for big and tall users
• Accommodate winter layers or bulky clothing
• Increase spacing between tool bags for comfort

Occidental Leather 5045 Installation Overview

1. Attach each leather extension to the existing Beltless suspender clips.
2. Fasten the back strap between the bags using the leather loops.
3. Adjust the buckle to set desired spacing and length.
4. Test fit and fine-tune for comfort and balance.

Occidental Leather 9512 Features

• Tool-specific storage for tape, pad, pens, pencils, screwdriver, utility knife, and pliers
• Accepts work belts up to 2 inches wide
• Industrial 2-ply Cordura fabric with foam core for structure
• Made in the USA

Occidental Leather 9512 Applications

• Punch list jobs and service calls
• Inspections and light-duty tasks
• Field technician essentials carry
• Belt-mounted tool organization

Occidental Leather 9512 Installation Overview

1. Slide the pouch onto a work belt up to 2 inches wide.
2. Position the pouch for comfortable access.
3. Load tools into the dedicated holders.
4. Ensure items are seated securely before use.

Occidental Leather 8578 Features

• Clip-on mount with spring steel attachment for suspenders
• Padded phone sleeve with velcro flap
• Holders for pencils, notepad, and driver bits
• Seven total pockets and holders
• Easy to install and remove as needed
• Made in USA

Occidental Leather 8578 Applications

• Chest-mounted carry for daily jobsite essentials
• Secure phone storage while climbing or moving
• Quick access to pencils, notepad, and driver bits
• Organization add-on for Stronghold suspenders

Occidental Leather 8578 Installation Overview

1. Position the pocket on the chest strap of Stronghold suspenders.
2. Clip the spring steel attachment over the strap until secure.
3. Place phone in padded sleeve and close velcro flap.
4. Load pencils, notepad, and bits into the designated holders.
5. Check fit and accessibility before use.

Occidental Leather 8574 Key Features

• Clip-on leather holster for phones
• Velcro closure to fit many phone sizes
• Heavy duty elastic sides expand up to 1-1/2 in
• 2 in spring steel belt clip for secure attachment
• Made in USA

Occidental Leather 8574 Applications

• Everyday belt carry for standard size smartphones
• Jobsite phone protection with secure closure
• Hands-free access while working or commuting
• Clips to belts or waistbands up to 2 in wide

Occidental Leather 8574 Installation Overview

1. Slide the spring steel clip over your belt or waistband.
2. Place your phone inside the pocket.
3. Close the flap and press the Velcro to secure.
4. Confirm the elastic sides hold the phone snugly.
5. Check access and adjust position as needed.

Occidental Leather 5527 Features

• Holds offset metal snips like Wiss M6 and M7; also fits pruning shears
• Full grain American leather construction
• Accepts belts up to 3 in. wide for stable carry
• Designed with steel framers in mind; great for pros and DIYers
• Made in the USA

Occidental Leather 5527 Applications

• Steel framing and sheet metal work
• General contracting and remodeling
• Landscaping and pruning tasks
• Tool belt organization for offset snips

Occidental Leather 5527 Installation Overview

1. Slide holster onto a belt up to 3 in. wide.
2. Optional: pair with the 2003 Oxy Tool Shield.
3. Insert offset snips or pruning shears fully into the pocket.
4. Confirm a secure fit before use.

Occidental Leather 9511 Key Features

• Cost efficient fastener management
• Modular clip-on design for easy swap between tasks
• Slightly deeper and narrower than the 9501
• Clips to belts up to 2 in wide; also clips to toolboxes or truck interiors
• Made in USA

Occidental Leather 9511 Applications

• Carrying nails, screws, and small fasteners
• Modular add-on storage for tool belts
• Quick-change setups for varied tasks
• Clipping to a truck or toolbox for organized access

Occidental Leather 9511 Installation Overview

1. Verify your belt is no wider than 2 in.
2. Slide the clip over the belt edge until fully seated.
3. Load fasteners into the pouch.
4. Adjust position on belt for comfort and reach.
5. Remove and reclip as needed for different applications.

Occidental Leather 5008SM Key Features

• Bridle leather, custom tanned in the USA
• Edge stitched for strength and clean look
• Heavy duty steel roller buckle with nickel finish
• 1.5 in. width for everyday wear
• Made in the USA

Occidental Leather 5008SM Applications

• Everyday pant support for workwear
• Jobsite use where a durable leather belt is preferred
• Holds small clip-on accessories compatible with pant belts

Occidental Leather 5008SM Installation Overview

1. Measure current belt from buckle end to most-used hole.
2. Select the size closest to that mid-range measurement.
3. If no belt to measure, add 4 in. to pant waist for an estimate.
4. Thread belt through pant loops and fasten with buckle.

Occidental Leather 1019 Key Features

• Bridle leather construction for durability and classic look
• Adjustable shoulder pad for added comfort
• High quality swivel steel clips for easy on and off
• 1" wide strap adjusts 45" to 57.5" to fit most users
• Made in USA

Occidental Leather 1019 Applications

• Add a shoulder carry option to Journeyman's Tote and IronMouth bags
• Upgrade or replace straps on tool bags and carry totes
• Comfortable carry for travel and everyday gear

Occidental Leather 1019 Installation Overview

1. Attach each swivel clip to the bag's D-rings or hardware loops.
2. Position the shoulder pad at the desired resting point.
3. Adjust strap length between 45" and 57.5" for fit.
4. Check clips for secure closure before use.

Occidental Leather B5057 Features

• Compact 4 pocket organizer protects you, your tools, and your clothes
• Creates an instant mini tool carrier for pliers, screwdrivers, and more
• Snap loop attaches to belts up to 2 inches wide
• Durable leather construction for daily use
• Made in USA

Occidental Leather B5057 Applications

• Small repair jobs
• Shop and maintenance work
• Gardening and yard upkeep
• Cabinetmaking and finish tasks
• Farm and field repairs

Occidental Leather B5057 Installation Overview

1. Load tools into the four pockets to suit your task.
2. Place the caddy in your pant pocket or position at the belt line.
3. Wrap the snap loop around a belt up to 2 inches wide, if preferred, and close the snap.
4. Adjust tool placement for balance and quick access.
5. After use, remove debris and store dry.

Occidental Leather 5044XL Key Features

• Adds extra length to existing suspenders for a better fit
• Compatible with Occidental 5009 and 5055 suspenders and systems
• Durable leather straps with metal hardware
• Quick clip-on connection for easy setup
• Sold as a matched pair; Made in USA

Occidental Leather 5044XL Applications

• Extend fit range for big and tall builders
• Upgrade or replace worn suspender extensions
• Improve comfort when wearing heavy tool belts

Occidental Leather 5044XL Installation Overview

1. Detach suspenders from your belt or vest if needed.
2. Clip each extension to the suspender connection point.
3. Attach the opposite end to your belt or harness D-rings.
4. Adjust suspender length for a comfortable fit.
5. Verify all clips are fully seated before use.

Occidental Leather 5058M Features

• 100 percent cotton for everyday comfort
• Natural color with bold Oxy red logo centered on chest
• Anniversary logo on the right sleeve
• Crew neck short sleeve design
• Medium size fit

Occidental Leather 5058M Applications

• Casual wear on and off the jobsite
• Brand pride and promotional events
• Comfortable everyday workwear layer

Occidental Leather 6530 Features

• Designed for standard 2.5 in round chew or dip cans
• 2 in proprietary steel belt clip; fits belts or waistbands up to 2 in wide
• Full-grain leather construction in classic OxBlood red
• Embossed Occidental Leather logo
• Made in USA

Occidental Leather 6530 Applications

• Jobsite carry for chew or dip cans
• Framing, welding, and general trades work
• Everyday belt or waistband accessory
• Walking the site while keeping hands free

Occidental Leather 6530 Installation Overview

1. Slide the steel clip onto a belt or waistband up to 2 in wide.
2. Insert the 2.5 in can into the leather holster.
3. Check retention and adjust holster position for easy access.
4. Remove the holster by lifting the clip and sliding off the belt.

Occidental Leather 8551 Features

• 2 inch steel clip enables fast on and off attachment
• Drawstring closure secures fasteners and small tools
• Dual layer 1000D sides and 1050D bottom for wear resistance
• Clips to most belts or waistbands up to 2 inches wide
• Made in the USA

Occidental Leather 8551 Applications

• Carry nails, screws, and small parts on the job
• Quick access storage for trim shims and wedges
• Add on pouch for tool belts and work vests
• Lightweight parts holder for service and install work

Occidental Leather 8551 Installation Overview

1. Slide or clip the pouch onto a belt or waistband up to 2 inches wide.
2. Load with fasteners or small tools.
3. Pull the drawstring to secure contents as needed.
4. Release the clip to remove when finished.

Occidental Leather 8552 Key Features

• 2 inch belt clip for fast on off attachment
• Drawstring closure keeps contents secure yet accessible
• Dual layer 1000D nylon sides and 1050D nylon bottom for wear resistance
• Medium size: 6 in diameter x 7 in high
• Made in the USA

Occidental Leather 8552 Applications

• Carry fasteners, anchors, and small hardware
• Quick access storage for bits and small hand tools
• Add on pouch for tool belts and vests
• Jobsite organization for installers and carpenters

Occidental Leather 8552 Installation Overview

1. Slide the 2 inch clip over your belt, pocket, or strap.
2. Load hardware or tools into the pouch.
3. Cinch the drawstring to secure contents.
4. Release the clip to reposition or remove as needed.

Occidental Leather 8071 Key Features

• Back strap ONLY for the 5592 Beltless Retro Kit
• Heavy duty construction for long service life
• Made in USA
• Simple, tool free attachment to Beltless system

Occidental Leather 8071 Applications

• Replace worn or damaged back strap on Beltless Retro Kit
• Maintain proper support and balance of Beltless system
• Improve bag movement and accessibility on Beltless setup

Occidental Leather 8071 Installation Overview

1. Detach the existing back strap from the Beltless Retro Kit loops.
2. Feed the new strap through the attachment points on both bags.
3. Secure ends and center buckle, ensuring even alignment.
4. Adjust strap tension for desired bag swing and comfort.
5. Confirm all connections are tight before use.

Occidental Leather 5055P Key Features

• Replacement shoulder pad for Stronghold Suspension System
• Ambidextrous design fits left or right shoulder
• Industrial nylon construction for long service life
• Made in USA

Occidental Leather 5055P Applications

• Replace worn or damaged pad on the 5055 Stronghold system
• Improve comfort during extended tool belt use
• Configure suspension setup for left or right shoulder wear

Occidental Leather 5055P Installation Overview

1. Remove the existing shoulder pad from the 5055 system.
2. Position the replacement pad on the desired shoulder side.
3. Attach using the system hardware per manufacturer guidance.
4. Adjust straps for a secure and comfortable fit.
5. Verify movement and load distribution before use.

Occidental Leather 5808 SM Features

• 9–10 oz Latigo leather
• Edge-stitched finish
• 1.5 inch width fits standard belt loops
• Solid stainless steel roller buckle
• Sizes SM–XL
• Made in USA

Occidental Leather 5237 Key Features

• High-mount, clip-on design installs without removing your belt
• Sized to fit 35 ft FatMax tape measures
• Proprietary steel belt clip fits belts up to 2 inches wide
• Heirloom-quality leather for long-lasting durability
• Made in USA

Occidental Leather 5237 Applications

• Secure belt carry for 35 ft tape measures on the jobsite
• Fast access measuring for framing, trim, and general carpentry
• Upgrade or replacement holster for tool belts and work pants

Occidental Leather 5237 Installation Overview

1. Slide or clip the steel clip over your belt (up to 2 inches wide).
2. Position the holster high on the belt for reduced swing.
3. Insert the tape measure into the pouch opening until fully seated.
4. Check retention and adjust holster position for comfort.
5. Remove by lifting the clip tab and sliding off the belt.

Occidental Leather B8554 Features

• 2 inch belt clip for quick attachment and removal
• Drawstring closure helps retain contents
• Durable build with dual layer 1000D nylon sides and 1050D nylon bottom
• Tall size: 5 in diameter x 8.5 in high
• Made in the USA

Occidental Leather B8554 Applications

• Holding fasteners, shims, and small hand tools
• Clip on storage for belts and vests
• Jobsite organization and quick access

Occidental Leather B8554 Installation Overview

1. Slide or clip the 2 inch belt clip onto your belt or strap.
2. Load tools or fasteners into the pouch.
3. Cinch the drawstring to secure contents.
4. Release clip to reposition or remove as needed.

Occidental Leather B5068 Features

• All-leather construction for long-term durability
• Snap closure secures calculator and allows quick access
• Fits up to a 3 inch work belt
• Compatible with Construction Master models I, II, III, IV and other brands
• Also available as clip-on model B6568

Occidental Leather B5068 Applications

• Jobsite calculator protection and portability
• Belt-mounted storage for quick measurement access
• Secure carry while walking, climbing, or working

Occidental Leather B5068 Installation Overview

1. Slide the case onto a belt up to 3 inches wide.
2. Insert the calculator into the pouch.
3. Close the snap to secure and check fit.

Occidental Leather 5808 M Features

• 9–10 oz Latigo leather
• Edge-stitched finish
• 1.5 inch width fits standard belt loops
• Solid stainless steel roller buckle
• Sizes SM–XL
• Made in USA