Occidental Leather
Occidental Leather Stronghold Leather Master Carpenter Case 5588
$451.90
Unit price perOccidental Leather 5588 Stronghold Master Carpenter Case
High-capacity leather tool case with an upright, divided layout for fast access. Features a hand-shaped leather handle, water-resistant rubber base, and 45 total pockets and holders across 3 compartments. Includes clip-on accessories and D-rings for an optional shoulder strap. Made in the USA.
Includes
- (1) 5588 Stronghold Master Carpenter Case
- (1) 5042 Tape Holster
- (1) 9501 Clip-On Pouch
- (2) Oxy Tool Shields
- (1) Rafter square holster
- (1) Side zip pouch for bits and small parts
Key Features
- Upright storage with 3 internal compartments for quick access
- 45 pockets and tool holders for organized carry
- All-leather main body with water-resistant rubber base
- Handcrafted leather handle that molds to your grip
- D-rings for shoulder strap attachment (strap not included)
Applications
- Carpentry and finish work tool organization
- Jobsite transport of hand tools, fasteners, and accessories
- Shop or service vehicle tool storage
Installation Overview
- Attach clip-on accessories to exterior mounting points as needed.
- Organize tools within the three compartments and outer pockets.
- Secure small parts in the side zip pouch and tool shields.
- Connect a compatible shoulder strap to D-rings if desired.
Specifications
| Material | Leather main body; water-resistant rubber base |
| Compartments | 3 |
| Pockets/Holders | 45 |
| Dimensions | 15.5 in L x 8.5 in W x 8 in H |
| Weight | 7.5 to 7.6 lb |
| Handle | Hand-shaped leather handle |
| D-Rings | Yes, for shoulder strap (strap not included) |
| Made In | USA |
Occidental Leather Stronghold Leather Master Carpenter Case 5588
Leather master carpenter tool case, 45 pockets
✓ 45 pockets with 3-compartment upright layout
✓ Leather body with water-resistant rubber base
✓ Hand-shaped handle molds to your grip
✓ Clip-on accessories included for tape and small parts
✓ D-rings for optional shoulder strap
$451.90
Unit price per11 in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Leather Gear Care
- Brush off grit daily; wipe with a damp cloth when dirty and let air dry.
- Shake out debris from inside compartments and pouches periodically.
- For deeper cleaning, use mild soap and water only; avoid bleach and solvents.
- About once a year, clean with saddle soap or mild cleaner, then apply a small amount of non–oil-based leather conditioner.
- Store dry and out of direct sun. Wipe off mud, concrete, or drying compounds before they set.
- Avoid oil-based products which can weaken stitching.
- 45 Pockets and Holders – Organized upright storage
- 3 Internal Compartments – Divided layout for quick access
- Leather Body + Rubber Base – Durable and water resistant
- Handcrafted Leather Handle – Molds to your grip
- Removable Accessories – 5042 tape holster, 9501 clip-on pouch, 2 Oxy Tool Shields
- D-Rings – For optional shoulder strap
- Dimensions: 15.5 in L x 8.5 in W x 8 in H
- Weight: 7.5–7.6 lb
- Made in the USA
$451.90
Unit price perMore About Occidental Leather Stronghold Leather Master Carpenter Case 5588
Occidental Leather 5588 Stronghold Master Carpenter Case
High-capacity leather tool case with an upright, divided layout for fast access. Features a hand-shaped leather handle, water-resistant rubber base, and 45 total pockets and holders across 3 compartments. Includes clip-on accessories and D-rings for an optional shoulder strap. Made in the USA.
Includes
- (1) 5588 Stronghold Master Carpenter Case
- (1) 5042 Tape Holster
- (1) 9501 Clip-On Pouch
- (2) Oxy Tool Shields
- (1) Rafter square holster
- (1) Side zip pouch for bits and small parts
Key Features
- Upright storage with 3 internal compartments for quick access
- 45 pockets and tool holders for organized carry
- All-leather main body with water-resistant rubber base
- Handcrafted leather handle that molds to your grip
- D-rings for shoulder strap attachment (strap not included)
Applications
- Carpentry and finish work tool organization
- Jobsite transport of hand tools, fasteners, and accessories
- Shop or service vehicle tool storage
Installation Overview
- Attach clip-on accessories to exterior mounting points as needed.
- Organize tools within the three compartments and outer pockets.
- Secure small parts in the side zip pouch and tool shields.
- Connect a compatible shoulder strap to D-rings if desired.
Specifications
| Material | Leather main body; water-resistant rubber base |
| Compartments | 3 |
| Pockets/Holders | 45 |
| Dimensions | 15.5 in L x 8.5 in W x 8 in H |
| Weight | 7.5 to 7.6 lb |
| Handle | Hand-shaped leather handle |
| D-Rings | Yes, for shoulder strap (strap not included) |
| Made In | USA |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
