Occidental Leather
Occidental Leather 5355 Stronghold® Comfort Package™
$203.90
Unit price perOccidental Leather 5355 Description
The 5355 Stronghold Comfort Package pairs the best selling 5055 Stronghold Suspension System with 9008 Hip Buddies to deliver balanced weight distribution and all day comfort. Built with leather and nylon components and made in the USA, it upgrades most tool belt setups and accepts any bag up to 7.5 inches wide.
Occidental Leather 5355 Includes
- (1) 5355 Stronghold Comfort Package
- (1) 5055 Stronghold Suspension System
- (1) 9008 Hip Buddies set
Occidental Leather 5355 Key Features
- Suspension system redistributes belt load for reduced strain
- Hip Buddies padding softens impact on hips and lower back
- Accepts any bag up to 7.5 inches wide
- Made in USA; leather and nylon construction
- Available colors: OxyRed and Black
- Not compatible with Adjust-to-Fit systems or Stronghold Comfort Belts; does not fit 5525 or B5611 bags
Occidental Leather 5355 Applications
- Comfort upgrade for heavy tool belt setups
- Reducing hip and lower back fatigue on long shifts
- General construction, carpentry, electrical, and remodeling work
- Supporting weight evenly during climbing, bending, and overhead tasks
Occidental Leather 5355 Installation Overview
- Attach the 9008 Hip Buddies around your work belt at the hip areas.
- Clip the 5055 suspension straps to the belt D-rings or belt loops per your setup.
- Adjust front and rear strap lengths for even weight distribution.
- Secure the chest strap for stability and fine tune fit.
- Verify bag width does not exceed 7.5 inches and confirm compatibility.
Occidental Leather 5355 Specifications
| SKU | 5355 |
| Weight | 2.4 lb (approx. 1091 g) |
| Material | Leather and Nylon |
| Made In | USA |
| Color Options | OxyRed, Black |
| Compatible Bag Width | Up to 7.5 inches |
| UPC | 759244285703 (OxyRed), 759244424706 (Black) |
| Not Compatible | 5525, B5611; all Adjust-to-Fit systems; Stronghold Comfort Belts/Systems |
Occidental Leather 5355 Stronghold® Comfort Package™
Suspenders and hip pads comfort package
✓ Suspension system redistributes load
✓ Hip Buddies padding for all day comfort
✓ Fits bags up to 7.5 in wide
✓ Not for Adjust-to-Fit or Comfort Belts
✓ Made in USA
$203.90
Unit price per4 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Leather and Nylon Gear Care
- Brush off dust and debris; wipe with a damp cloth and mild soap as needed.
- Air dry away from direct heat or sunlight.
- Condition leather occasionally with a quality leather conditioner; avoid soaking.
- Do not use harsh chemicals, bleach, or solvents.
- Store in a cool, dry place; keep sharp tools from cutting pads or straps.
- Load-redistributing suspenders balance tool belt weight
- 9008 Hip Buddies add cushioning at contact points
- Accepts bags up to 7.5 inches wide
- Construction: Leather and nylon
- Colors: OxyRed, Black
- Made in USA
- Not compatible: 5525, B5611, Adjust-to-Fit systems, Stronghold Comfort Belts
- Weight: 2.4 lb (approx. 1091 g)
- UPC: 759244285703 (OxyRed); 759244424706 (Black)
More About Occidental Leather 5355 Stronghold® Comfort Package™
Occidental Leather 5355 Description
The 5355 Stronghold Comfort Package pairs the best selling 5055 Stronghold Suspension System with 9008 Hip Buddies to deliver balanced weight distribution and all day comfort. Built with leather and nylon components and made in the USA, it upgrades most tool belt setups and accepts any bag up to 7.5 inches wide.
Occidental Leather 5355 Includes
- (1) 5355 Stronghold Comfort Package
- (1) 5055 Stronghold Suspension System
- (1) 9008 Hip Buddies set
Occidental Leather 5355 Key Features
- Suspension system redistributes belt load for reduced strain
- Hip Buddies padding softens impact on hips and lower back
- Accepts any bag up to 7.5 inches wide
- Made in USA; leather and nylon construction
- Available colors: OxyRed and Black
- Not compatible with Adjust-to-Fit systems or Stronghold Comfort Belts; does not fit 5525 or B5611 bags
Occidental Leather 5355 Applications
- Comfort upgrade for heavy tool belt setups
- Reducing hip and lower back fatigue on long shifts
- General construction, carpentry, electrical, and remodeling work
- Supporting weight evenly during climbing, bending, and overhead tasks
Occidental Leather 5355 Installation Overview
- Attach the 9008 Hip Buddies around your work belt at the hip areas.
- Clip the 5055 suspension straps to the belt D-rings or belt loops per your setup.
- Adjust front and rear strap lengths for even weight distribution.
- Secure the chest strap for stability and fine tune fit.
- Verify bag width does not exceed 7.5 inches and confirm compatibility.
Occidental Leather 5355 Specifications
| SKU | 5355 |
| Weight | 2.4 lb (approx. 1091 g) |
| Material | Leather and Nylon |
| Made In | USA |
| Color Options | OxyRed, Black |
| Compatible Bag Width | Up to 7.5 inches |
| UPC | 759244285703 (OxyRed), 759244424706 (Black) |
| Not Compatible | 5525, B5611; all Adjust-to-Fit systems; Stronghold Comfort Belts/Systems |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
