Occidental Leather
Occidental Leather 5089LH LG Seven Bag Framer - Left Handed
Occidental Leather 5089LHLG Description
Left handed, Large Seven Bag Framer tool belt set built from premium top grain leather for maximum tool and fastener capacity. Includes 23 pockets and tool holders, NoSpill tool organization, and copper rivet reinforcement. Made in the USA.
Occidental Leather 5089LHLG Includes
- (1) Seven Bag Framer Tool Belt Set - Left Handed, Large
- (1) 5035 HD 3 in. Ranger Work Belt
- (1) 5062 4 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5018DB 3 Pouch Pro Tool Bag with Tape Holder
Occidental Leather 5089LHLG Key Features
- Premium top grain leather construction for durability
- Seven pouch layout for high capacity organization
- NoSpill tool holder system for secure, efficient access
- Copper rivet reinforcements on main bags
- 12 oz belting leather with steel roller buckle
- Made in USA
Occidental Leather 5089LHLG Applications
- Framing and rough carpentry
- Jobsite tool and fastener carrying
- Production carpentry setups requiring maximum pouch capacity
- Left handed tradespeople needing optimized layout
Occidental Leather 5089LHLG Installation Overview
- Measure your current tool belt per manufacturer sizing guide and select Large.
- Adjust the HD Ranger belt to fit over typical work clothing.
- Position the tool bag on the left and fastener bag on the right for left handed use.
- Load tools and fasteners into dedicated pockets to balance weight.
- Secure hammer in holder and verify comfortable reach to primary tools.
Occidental Leather 5089LHLG Specifications
| Pockets and Tool Holders | 23 |
| Belt Size | Large |
| Weight | 5.4 lbs |
| Material | Premium top grain leather |
| Color | Brown, Tan |
| Hand Orientation | Left handed |
| Country of Manufacture | USA |
| Components | 5035 belt, 5062 fastener bag, 5012 hammer holder, 5018DB tool bag with tape holder |
Occidental Leather 5089LH LG Seven Bag Framer - Left Handed
Left handed leather framer tool belt set, large
✓ Left handed layout tool bag left, fastener right
✓ Premium top grain leather Pro Leather build
✓ 23 pockets and holders for high capacity
✓ NoSpill tool organization keeps tools secure
✓ Made in USA
1 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Leather Gear Care
- Brush off grit daily and wipe with a damp cloth when dirty.
- Shake out debris from bags and pouches periodically.
- Clean heavy grime with mild soap and water only; air dry away from heat.
- About once a year, clean with saddle soap or mild cleaner, then apply a small amount of non oil based leather conditioner.
- Store dry and out of direct sun; avoid oil based products that can weaken stitching.
- Wipe off mud, concrete, or drying compounds before they cure to prevent drying out the leather.
- Premium Top Grain Leather durable Pro Leather construction
- Seven Pouch Layout for maximum tool and fastener organization
- NoSpill Tool Holder System purpose built holders keep tools secure
- Copper Rivet Reinforcements added strength on main bags
- 12 oz Belting Leather with steel roller buckle
- Pockets and Tool Holders: 23
- Belt Size: Large
- Weight: 5.4 lbs
- Material: Leather
- Color: Brown, Tan
- Made in the USA
More About Occidental Leather 5089LH LG Seven Bag Framer - Left Handed
Occidental Leather 5089LHLG Description
Left handed, Large Seven Bag Framer tool belt set built from premium top grain leather for maximum tool and fastener capacity. Includes 23 pockets and tool holders, NoSpill tool organization, and copper rivet reinforcement. Made in the USA.
Occidental Leather 5089LHLG Includes
- (1) Seven Bag Framer Tool Belt Set - Left Handed, Large
- (1) 5035 HD 3 in. Ranger Work Belt
- (1) 5062 4 Pouch Pro Fastener Bag
- (1) 5012 Hammer Holder
- (1) 5018DB 3 Pouch Pro Tool Bag with Tape Holder
Occidental Leather 5089LHLG Key Features
- Premium top grain leather construction for durability
- Seven pouch layout for high capacity organization
- NoSpill tool holder system for secure, efficient access
- Copper rivet reinforcements on main bags
- 12 oz belting leather with steel roller buckle
- Made in USA
Occidental Leather 5089LHLG Applications
- Framing and rough carpentry
- Jobsite tool and fastener carrying
- Production carpentry setups requiring maximum pouch capacity
- Left handed tradespeople needing optimized layout
Occidental Leather 5089LHLG Installation Overview
- Measure your current tool belt per manufacturer sizing guide and select Large.
- Adjust the HD Ranger belt to fit over typical work clothing.
- Position the tool bag on the left and fastener bag on the right for left handed use.
- Load tools and fasteners into dedicated pockets to balance weight.
- Secure hammer in holder and verify comfortable reach to primary tools.
Occidental Leather 5089LHLG Specifications
| Pockets and Tool Holders | 23 |
| Belt Size | Large |
| Weight | 5.4 lbs |
| Material | Premium top grain leather |
| Color | Brown, Tan |
| Hand Orientation | Left handed |
| Country of Manufacture | USA |
| Components | 5035 belt, 5062 fastener bag, 5012 hammer holder, 5018DB tool bag with tape holder |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
