Occidental Leather
Occidental Leather 8517 Clip-On Carpenter Tool Bag
$107.90
Unit price perOccidental Leather 8517 Builders' Vest Tool Bag Description
Clip-on carpenter tool pouch designed for the 2535 Builders Vest. Includes holders for pencils, work knife, chisel, level, lumber crayon, and a heavy-duty hammer loop. Main bag corners reinforced with OxyRed leather; right-side wear layout. Made in USA.
Occidental Leather 8517 Includes
- (1) Tool Pouch
Occidental Leather 8517 Key Features
- Clip-on design for quick attachment to 2535 Builders Vest
- 9 pockets and tool holders for organized access
- Heavy-duty hammer loop and dedicated small tool holders
- OxyRed leather-reinforced corners for durability
- Right-side wear layout; Made in USA
Occidental Leather 8517 Applications
- Carpentry and framing tool organization
- Layout and marking tools storage on the job
- Trim and finish work where quick access is needed
- Vest-mounted storage for daily use
- General construction tasks requiring compact carry
Occidental Leather 8517 Installation Overview
- Attach the pouch to the 2535 Builders Vest using the clip-on mounts.
- Position on the right side for dominant-hand access.
- Load essential tools into dedicated holders and pockets.
- Secure hammer in the loop and check balance.
- Tighten vest belt and verify stable carry before use.
Occidental Leather 8517 Specifications
| Pockets & Tool Holders | 9 |
| Weight | 1.2 lbs |
| Main Bag | 9" x 8" |
| Outer Bag | 6.5" x 5.5" |
| Color | Black |
| Material | Nylon |
| Compatibility | 2535 Builders Vest |
| Wear Position | Right side |
Occidental Leather 8517 Clip-On Carpenter Tool Bag
Clip-on carpenter pouch for Builders Vest
✓ Clip-on design for 2535 Builders Vest
✓ 9-pocket layout for small tools
✓ OxyRed leather corners reinforced
✓ Heavy-duty hammer loop included
✓ Made in USA
$107.90
Unit price per1 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Nylon and Leather Pouch Care
- Brush off dust and debris; wipe with a damp cloth and air dry.
- Use mild soap and water for heavier grime; avoid harsh chemicals.
- Do not machine wash or soak; protect leather from prolonged moisture.
- Condition leather occasionally with a suitable leather conditioner.
- Store in a cool, dry place away from direct sunlight.
- Clip-on design for 2535 Builders Vest
- 9 pockets & tool holders for organized access
- OxyRed leather-reinforced corners for durability
- Heavy-duty hammer loop plus small tool holders
- Material: Nylon
- Color: Black
- Main Bag: 9" x 8"
- Outer Bag: 6.5" x 5.5"
- Pockets & Tool Holders: 9
- Weight: 1.2 lbs
- Made in the USA
More About Occidental Leather 8517 Clip-On Carpenter Tool Bag
Occidental Leather 8517 Builders' Vest Tool Bag Description
Clip-on carpenter tool pouch designed for the 2535 Builders Vest. Includes holders for pencils, work knife, chisel, level, lumber crayon, and a heavy-duty hammer loop. Main bag corners reinforced with OxyRed leather; right-side wear layout. Made in USA.
Occidental Leather 8517 Includes
- (1) Tool Pouch
Occidental Leather 8517 Key Features
- Clip-on design for quick attachment to 2535 Builders Vest
- 9 pockets and tool holders for organized access
- Heavy-duty hammer loop and dedicated small tool holders
- OxyRed leather-reinforced corners for durability
- Right-side wear layout; Made in USA
Occidental Leather 8517 Applications
- Carpentry and framing tool organization
- Layout and marking tools storage on the job
- Trim and finish work where quick access is needed
- Vest-mounted storage for daily use
- General construction tasks requiring compact carry
Occidental Leather 8517 Installation Overview
- Attach the pouch to the 2535 Builders Vest using the clip-on mounts.
- Position on the right side for dominant-hand access.
- Load essential tools into dedicated holders and pockets.
- Secure hammer in the loop and check balance.
- Tighten vest belt and verify stable carry before use.
Occidental Leather 8517 Specifications
| Pockets & Tool Holders | 9 |
| Weight | 1.2 lbs |
| Main Bag | 9" x 8" |
| Outer Bag | 6.5" x 5.5" |
| Color | Black |
| Material | Nylon |
| Compatibility | 2535 Builders Vest |
| Wear Position | Right side |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
