Occidental Leather Framing Tool Belts & Carpenter Bags

Occidental Leather B5611 Features

• All leather construction with classic black finish
• Integrated Oxy Tool Shield for sharp tools
• Upper bag with sleeve pockets and drill bit holsters
• Side by side 35 ft tape holster and angle square holster
• Reinforced back wall at stress points
• Pockets & tool holders: 10
• Available left-hand version: B5611LH

Occidental Leather B5611 Applications

• Fastener and small tool organization for framing and carpentry
• Quick access to tape, angle square, and drill bits
• Left-side wear for tools commonly accessed with the left hand

Occidental Leather 9085 Features

• Purpose-built tool organization in a compact case
• 18 pockets and tool holders for screwdrivers, chisels, bits, and more
• Leather-lined bottom enhances durability and shape retention
• Four rigid interior walls keep tools upright
• Includes 2 Oxy Tool Shields for sharp tool protection
• Made in the USA

Occidental Leather 9085 Applications

• Finish carpentry tool organization
• Plant engineering and maintenance kits
• On-the-go tool access for service professionals
• Upright storage for hand tools and accessories

Occidental Leather 9085 Installation Overview

1. Load tools into dedicated pockets and holders.
2. Place sharp tools in the included Oxy Tool Shields.
3. Attach the case securely to your work belt.
4. Arrange tools upright using interior dividers for quick access.

Occidental Leather 9855LH Features

• Adjust-to-Fit belt for pant waist 32 in to 41 in
• D rings pre installed for suspenders
• FatLip bag design with structured mouth
• Hand specific tool holders for improved rhythm
• Rear 2 in 1 tool and hammer holder; includes Oxy Tool Shield
• Made in USA

Occidental Leather 9855LH Applications

• Production carpentry tool carry and organization
• Framing and layout work
• General jobsite fastening and measuring tasks
• Use with suspension systems for extended wear

Occidental Leather 9855LH Installation Overview

1. Measure and adjust belt to fit within 32 in to 41 in range.
2. Position tool and fastener bags for left handed layout.
3. Attach hammer holder and accessories to belt loops.
4. Load tools and fasteners; confirm balanced carry.
5. Optionally connect suspenders to pre installed D rings.

Occidental Leather B9588 Features

• Premium top-grain leather bags with reinforced corners
• Adjust-to-Fit belt for 32" to 40" pant waist sizes
• Pre-installed D-rings compatible with suspension systems
• Hand-specific tool holders for efficient workflow
• 22 pockets and tool holders for organized storage

Occidental Leather B9588 Applications

• Framing and general carpentry tool carry
• Remodeling and jobsite tool organization
• Builder and contractor daily tool storage

Occidental Leather 5024 Features

• Extra deep 10 in open pouch for maximum capacity
• Full grain leather construction for long term durability
• Minimalist design without internal tool holders
• Belt mount for easy integration with tool belts
• Made in the USA

Occidental Leather 5024 Applications

• Carrying fasteners and hardware
• Stowing bulky or odd shaped tools
• General purpose jobsite carry on a work belt

Occidental Leather 5024 Installation Overview

1. Slide the pouch onto your work belt through the belt loop.
2. Position for preferred reach on dominant or opposite side.
3. Load tools or fasteners into the main pocket.
4. Adjust load for balance and secure carry.

Occidental Leather 8080DBLHLG Key Features

• Left handed layout with hand specific tool holders
• Padded two ply tool bags hold their shape
• Industrial nylon body provides high abrasion resistance
• Leather tool holders with OxyRed reinforced corners
• Lighter weight alternative to full leather framer sets

Occidental Leather 8080DBLHLG Applications

• Framing and rough carpentry tasks
• General construction and remodeling
• Jobsite tool organization and carry
• Left handed users needing a dedicated layout

Occidental Leather 8080DBLHLG Installation Overview

1. Measure an existing belt from buckle to the most used hole to determine size.
2. Select the Large belt if your measurement falls in its mid range.
3. Position the belt over work clothing and adjust for a snug fit.
4. Arrange the left handed bags and hammer holder on the belt as preferred.
5. Load tools into the hand specific holders to verify balance and access.

Occidental Leather B8017DBLH Key Features

• Left handed layout worn on the left side for quick access
• Holders for pencils, work knife, chisel, level, and lumber crayon
• Heavy duty hammer loop for secure carry
• OxyRed leather reinforced corners and internal holders for durability
• Lightweight OxyLights hybrid nylon and leather construction
• Three pouch design for compact organization
• Made in USA

Occidental Leather B8017DBLH Applications

• Organizing everyday carpenter and framer hand tools
• Left side carry on work belts and belt systems
• Keeping pencils, knives, chisels, and levels at the ready
• Jobsite use where lightweight yet durable storage is needed
• General construction and finishing tasks

Occidental Leather B8017DBLH Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Secure the belt and adjust placement for comfort.
4. Load tools into dedicated holders and pouches.
5. Confirm hammer loop and tools are seated securely before use.

Occidental Leather 2580LH Features

• Wide padded shoulder support lined with Dri Lex for moisture management
• Fully adjustable straps for a comfortable fit on most builders
• Balanced load carry to reduce strain and lower back fatigue
• 36 pockets and holders keep essential tools accessible
• Quick release chest buckle and heavy duty D ring for hanging storage

Occidental Leather 2580LH Applications

• Framing tasks needing high capacity tool access
• Electrical work with balanced weight distribution
• Concrete forming and layout
• Trim and finish work in tight spaces

Occidental Leather 2580LH Installation Overview

1. Adjust shoulder straps and chest buckle for a secure, comfortable fit.
2. Attach B8064LH and B8017LH bags to the 3 in leather belting.
3. Ensure tunnel loop attachments are seated; tighten as needed.
4. Load tools into the 36 pockets and holders to balance weight.
5. Use the D ring for hanging storage when removing the vest.

Occidental Leather 5087 LG Key Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout with tape holder on left
• Function engineered for modern builders
• Made in USA

Occidental Leather 5087 LG Applications

• Framing and general carpentry
• Organized tool and fastener carry on the jobsite
• Outdoor construction environments
• Setups favoring tape holder on the left side
• Daily use by professional trades

Occidental Leather 5087 LG Installation Overview

1. Measure your current tool belt from buckle end to used hole to determine size.
2. Position tool bag on dominant hand side and fastener bag on opposite side.
3. Buckle the 3 in. Ranger belt at midpoint hole and adjust for comfort.
4. Load essential tools and fasteners into designated pockets and holders.
5. Fine tune bag placement for reach and working rhythm.

Occidental Leather 8584 Key Features

• 10 in deep main pouch with structured FatLip leather mouth
• Full leather boot for rugged longevity
• 13 pockets and tool holders for everyday layout tools
• Right-side layout; left-hand version available as 8584LH
• Made in the USA

Occidental Leather 8584 Applications

• Organizing and carrying hand tools on a tool belt
• Framing and general carpentry tasks
• Remodeling and jobsite maintenance work
• Right-hand dominant tool layouts

Occidental Leather 8584 Installation Overview

1. Slide the bag onto a compatible work belt through the leather belt slot.
2. Position on the right side for right-hand use (or choose 8584LH for left-hand use).
3. Load tools by category into interior and exterior holders.
4. Secure any clips or add-on holders as needed and check balance.

Occidental Leather B5625XXL Key Features

• Lightweight 100% premium top-grain leather — no break-in required
• Hand-specific tool holders for natural workflow
• NoSpill holder system keeps tools secure
• Reinforced back walls at stress points for extended wear
• Side-by-side upper bag & tape mount for streamlined access
• Made in the USA

Occidental Leather B5625XXL Applications

• Framing carpentry setups requiring fast access to nails & tools
• General construction and remodel work
• Jobsite organization for levels, squares, chisels, and drivers
• Daily professional use where durability and balance are essential

Occidental Leather B5625XXL Installation Overview

1. Measure an existing tool belt from buckle end to your most?used hole.
2. Match that measurement to the size chart’s mid?range value.
3. If no belt to measure, add 4" to your pant waist for an approximate mid?range.
4. Adjust the belt to the midpoint hole; allow 4" of adjustment each side.
5. Load tools into hand-specific holders and secure with NoSpill system.

Occidental Leather B8017DB Key Features

• 3-pouch layout for compact organization
• Dedicated tool holders for chisel, knife, level, pencils, and lumber crayon
• Heavy-duty hammer loop for secure carry
• Main bag corners reinforced with OxyRed leather
• Right-hand layout; left-hand model available

Occidental Leather B8017DB Applications

• Daily carry and organization of essential hand tools
• Carpentry and framing tasks needing quick tool access
• Finish work where compact, lightweight storage is preferred
• Jobsite use with a compatible work belt

Occidental Leather B8017DB Installation Overview

1. Attach the tool bag to a compatible work belt.
2. Position on the right side for right-hand layout.
3. Load tools into dedicated holders and pouches.
4. Check rivets and stitching; ensure secure fit before use.

Key Features

• Popular 3 pouch pro layout without a tape pocket
• Double outer bags for added capacity and organization
• Tool holders for pencils, utility knife, lumber crayon, chisel, torpedo level, and hammer
• Left handed configuration; worn on the left side
• Made in the USA

Applications

• Carpentry and framing tool organization
• General construction and remodeling
• Finish work tool carry
• Jobsite hand tool access and storage

Installation Overview

1. Slide the bag onto a compatible work belt.
2. Position on the left side for left handed access.
3. Load tools into dedicated holders and pouches.
4. Check balance and tighten belt for a secure fit.

Occidental Leather 8017 Features

• Streamlined 2-pouch layout for focused setups
• Right-side wear for tools accessed with the right hand
• 9 total pockets and holders for common hand tools
• Tape pocket removed for a lighter profile
• Made in USA

Occidental Leather 8017 Applications

• Daily carry of layout and framing essentials
• Organizing chisels, knives, pencils, and level on the job
• Right-side tool access for carpentry and trim work

Occidental Leather 5080DBLH LG Key Features

• Left handed, hand specific layout
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Built in tape holster for tapes up to 30 ft
• Pockets and tool holders: 21
• Made in USA

Occidental Leather 5080DBLH LG Applications

• Framing and rough carpentry
• General construction tool carry
• Remodeling and jobsite setup
• Efficient organization of tools and fasteners
• Left handed trades needing balanced access

Occidental Leather 5080DBLH LG Installation Overview

1. Measure your current tool belt from buckle end to the used hole to determine belt size.
2. Select size to match the midpoint measurement for proper adjustment.
3. Position tool bag on dominant left side and fastener bag on right.
4. Secure the belt using the steel roller buckle and adjust for comfort.
5. Load tools and tapes into the hand specific holders and verify balanced carry.

Occidental Leather 8086LHLG Key Features

• Hand specific tool holders for a left handed layout
• Padded two ply bags maintain shape
• Industrial nylon body for high abrasion resistance
• Leather tool holders with leather reinforced corners
• Seven bag configuration with patented 2-in-1 outer pouch

Occidental Leather 8086LHLG Installation Overview

1. Lay your current belt flat and measure from the buckle end to the most used hole.
2. Select the belt size whose mid range is closest to that measurement.
3. If you do not have a belt, use your approximate mid range waist measurement to choose size.

Occidental Leather 5080LH LG Features

• 21 pockets and tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout promotes work rhythm
• Made in USA

Occidental Leather 5080LH LG Applications

• Framing and general carpentry
• Fastener and small tool organization on site
• Measuring and layout tasks
• Daily carry for hammers, tapes, and hand tools

Occidental Leather 5080LH LG Installation Overview

1. Put the belt on over work clothes where you normally wear it.
2. Note the hole used to fasten the belt.
3. Measure from the buckle to that hole to determine belt size.
4. Load tools into hand specific holders and adjust fit for comfort.

Occidental Leather 5063 Features

• Beltless compatibility for streamlined setup
• Three-pouch layout for fastener organization
• Left-side fastener orientation
• Durable leather construction
• Made in USA

Occidental Leather 5063 Applications

• Carry layout tools like driver bits and angle squares
• Organize nails and small fasteners
• Framing and carpentry tasks
• General construction tool carry

Occidental Leather 5063 Installation Overview

1. Attach pouch to Stronghold Beltless System per manufacturer guidance.
2. Position on the left side for fastener access.
3. Load tools and fasteners into main, middle, and outer bags.
4. Check balance and retention before use.

Occidental Leather 5087LHLG Features

• 21 pockets & tool holders
• Premium top grain leather construction
• 12 oz belting leather with steel roller buckle
• Copper rivets reinforce main bags
• NoSpill tool holder system
• Hand specific layout for left handed users
• Function engineered for modern builders
• Made in USA

Occidental Leather 5087LHLG Applications

• Framing and rough carpentry
• General construction and remodeling
• Left handed jobsite tool organization
• Efficient fastener and tool access

Occidental Leather 5087LHLG Installation Overview

1. Select correct belt size and thread through pouches and holders.
2. Position tape holder on right and double pouch tool bag on left.
3. Attach hammer holder and adjust locations as preferred.
4. Buckle belt and adjust for a snug, comfortable fit.
5. Load tools and fasteners; verify balanced weight and access.

Occidental Leather 9550LH Features

• Premium top-grain leather bags
• Copper rivets reinforce main bags
• Adjust-to-fit belt allows seasonal clothing changes
• D rings pre-installed for use with suspension systems
• Hand-specific tool holders for efficient workflow
• Removable high mount hammer holder on rear
• Rugged commercial nylon and high-density neoprene padding

Occidental Leather 9550LH Applications

• Framing and general carpentry setups
• Left-handed tool belt organization on the jobsite
• Use with suspension systems via pre-installed D rings

Occidental Leather 9550LH Installation Overview

1. Adjust belt to pant waist size using the crossover system until locked.
2. Position tool and fastener bags on left/right sides per left-handed layout.
3. Attach the high mount hammer holder to rear as desired.
4. Connect suspenders to D rings if using a suspension system.
5. Load tools and verify bags remain fixed without slipping.

Occidental Leather 5064 Key Features

• Beltless design integrates with Stronghold Beltless System
• 3-pouch layout with dual outer bags for organization
• Right-side orientation for quick access to frequently used tools
• 10 pockets and holders for hand tools and layout gear
• Premium leather construction; made in the USA

Occidental Leather 5064 Applications

• Right-side carry for hammers, knives, chisels, and pencils
• Beltless setups using Stronghold hubs and suspenders
• Carpentry, framing, trim, and general construction tasks

Occidental Leather 5064 Installation Overview

1. Attach the bag to your Stronghold Beltless System hubs or suspenders.
2. Position on the right side for preferred access.
3. Load tools into the main and dual outer pouches for balance.
4. Confirm rings and connectors are fully seated before use.