Occidental Leather
Occidental Leather Nylon Hip Buddies 9008
$64.90
Unit price perOccidental Leather 9008 Hip Buddies Description
Add comfort to any belt-worn tool system with Occidental Leather 9008 Hip Buddies. Using high-density cushion technology from the brand’s Adjust-to-Fit systems, these lightweight pads retrofit easily to most work belts and accept bags up to 7.5″ wide. Made in the USA.
Occidental Leather 9008 Includes
- (2) Hip Buddies pads
Occidental Leather 9008 Key Features
- High-density cushion technology for hip comfort
- Lightweight design; easy to retrofit to existing belt sets
- Accepts any bag up to 7.5″ wide
- Not compatible with 5525 Big Oxy Fastener Bag or B5611 Green Building Fastener Bag
- Leather/Nylon construction with integrated D-rings
- Made in the USA
Occidental Leather 9008 Applications
- Upgrade belt comfort for long workdays
- Add cushioned support beneath tool bags and pouches
- Retrofit to existing Occidental Leather or compatible work belts
- Use with suspenders via D-rings for added load distribution
Occidental Leather 9008 Installation Overview
- Remove tool bags/pouches from your belt.
- Slide each Hip Buddy onto the belt and position over the hips.
- Reinstall bags (up to 7.5″ wide) over the pads.
- Secure and adjust belt fit; attach suspenders to D-rings if used.
- Confirm pads are centered and do not interfere with tool access.
Occidental Leather 9008 Specifications
| Brand | Occidental Leather |
| Model | 9008 |
| Material | Leather/Nylon |
| Accepts Bag Width | Up to 7.5″ |
| Color | Black |
| UPC | 759244284409 |
| Country of Origin | USA |
Occidental Leather Nylon Hip Buddies 9008
Hip Buddies belt pads, lightweight comfort, 7.5″ bag max
✓ High-density cushion pads for hip comfort
✓ Lightweight, easy retrofit to existing belts
✓ Fits bags up to 7.5″ wide
✓ Leather/Nylon construction with D-rings
✓ Made in USA
$64.90
Unit price per29 in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Care & Maintenance
- Wipe nylon panels clean with a damp cloth and mild soap; rinse and air dry.
- Do not machine wash, soak, bleach, or dry clean.
- Dry completely away from direct sunlight or high heat before storage.
- For the leather loops/accents: brush off dirt and treat occasionally with a quality leather conditioner; avoid saturating with water or harsh chemicals.
- If exposed to rain, remove from the belt and let dry naturally; recondition the leather after drying.
- Keep metal hardware dry and free of debris; inspect fasteners periodically and tighten if needed.
- High-density cushion technology — improved hip comfort under load
- Lightweight retrofit — slides onto most work belts
- Accepts bags up to 7.5″ wide
- Leather/Nylon build with integrated D-rings
- Made in USA
- Brand: Occidental Leather
- Model: 9008
- Material: Leather/Nylon
- Color: Black
- UPC: 759244284409
- Country of Origin: USA
More About Occidental Leather Nylon Hip Buddies 9008
Occidental Leather 9008 Hip Buddies Description
Add comfort to any belt-worn tool system with Occidental Leather 9008 Hip Buddies. Using high-density cushion technology from the brand’s Adjust-to-Fit systems, these lightweight pads retrofit easily to most work belts and accept bags up to 7.5″ wide. Made in the USA.
Occidental Leather 9008 Includes
- (2) Hip Buddies pads
Occidental Leather 9008 Key Features
- High-density cushion technology for hip comfort
- Lightweight design; easy to retrofit to existing belt sets
- Accepts any bag up to 7.5″ wide
- Not compatible with 5525 Big Oxy Fastener Bag or B5611 Green Building Fastener Bag
- Leather/Nylon construction with integrated D-rings
- Made in the USA
Occidental Leather 9008 Applications
- Upgrade belt comfort for long workdays
- Add cushioned support beneath tool bags and pouches
- Retrofit to existing Occidental Leather or compatible work belts
- Use with suspenders via D-rings for added load distribution
Occidental Leather 9008 Installation Overview
- Remove tool bags/pouches from your belt.
- Slide each Hip Buddy onto the belt and position over the hips.
- Reinstall bags (up to 7.5″ wide) over the pads.
- Secure and adjust belt fit; attach suspenders to D-rings if used.
- Confirm pads are centered and do not interfere with tool access.
Occidental Leather 9008 Specifications
| Brand | Occidental Leather |
| Model | 9008 |
| Material | Leather/Nylon |
| Accepts Bag Width | Up to 7.5″ |
| Color | Black |
| UPC | 759244284409 |
| Country of Origin | USA |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
