How to Size your Suspenders?

Measuring Instructions:You'll need a flexible tape measure and your tool belt.With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.Round that measurement up to the nearest whole number.Sizing Chart:Small: ≤ 38" (96.5 cm)Standard: 38-48" (96.5 - 122 cm)Extension Kit: > 48" (122 cm)

How to Install Hammer Sleeve?

The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.Installation Tips:Take your time positioning the sleeve before making permanent holes - measure twice, drill once.The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.Make sure the hammer head will be easily accessible when you reach for it.Consider your dominant hand and work style when choosing placement.For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.What Are the Benefits?No More Leg Slapping: Keeps your hammer from swinging and hitting your legsQuick Access: Positions hammer at your fingertips for one-handed retrievalCompact Carry: Tucks hammer close to your body, ideal for working in tight spacesProtects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trimHigh Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movementHow Long Will It Last?Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.Can I Remove It Later?No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.Do I Need Special Tools?You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.

Occidental Leather Nylon Belt Buddy 9005

Name: Occidental Leather Nylon Belt Buddy 9005
Brand: Occidental Leather
SKU: 57320
Price: 34.90 USD
Availability: InStock

Tool belt lower back support pad

Model : 9005

✓ Extra lower back support for work belts
✓ Slides under third bag or hammer holder
✓ High density foam with polyethylene stiffener
✓ Industrial nylon cover for durability
✓ Made in USA

$34.90

68 in stock

Quantity

Pay with

Your transaction is protected with advanced security measures to keep your information confidential

Nylon Gear Care

Brush off grit daily; wipe with a damp cloth and air dry.
Shake out debris from the inside periodically.
Avoid prolonged sun exposure and harsh chemical cleaners.
For tough grime, clean with mild soap and water.
Store in a cool, dry place when not in use.

Abrasions or small tear repair

Seal with nylon repair tape or fabric patch; small areas can be treated with a drop of super glue.
Clean and dry the surface before applying a patch.
For added strength, stitch over the damaged area with heavy-duty thread.

Catching minor damage early helps prevent failure, especially at seams, corners, and straps.

Lower back support for tool belts
Fits under third bag or hammer holder without interference
High density foam with polyethylene stiffener
Industrial nylon cover for durability
Made in USA
UPC: 759244054002
Weight: Approx. 0.3 lb
Material: Foam pad with polyethylene stiffener; nylon cover
MFG Part: 9005
Package Contents: (1) Belt Buddy pad

Occidental Leather Nylon Belt Buddy 9005

$34.90

More About Occidental Leather Nylon Belt Buddy 9005

Occidental Leather 9005 Belt Buddy Description

The Belt Buddy adds lower back support to existing tool belts. It fits under a third bag or hammer holder and features a comfortable high density foam pad with a polyethylene stiffener covered in industrial nylon. Made in USA.

Occidental Leather 9005 Includes

(1) Pad

Occidental Leather 9005 Features

Provides extra lower back support on tool belts
Slides under a third bag or hammer holder
High density foam pad with polyethylene stiffener
Durable industrial nylon cover
Made in USA

Occidental Leather 9005 Applications

Add support and comfort to existing work belts
Use beneath a third bag or hammer loop without interference
Stabilize belt load during heavy tool carry
Retrofit for most professional tool belt systems

Occidental Leather 9005 Installation Overview

Slide the Belt Buddy onto your work belt at the rear center.
Position so it sits comfortably at the lower back.
Attach a third bag or hammer holder over the pad if desired.
Tighten belt and adjust for support and fit.

Occidental Leather 9005 Specifications

Manufacturer	Occidental Leather
Model / MFG Part	9005
UPC	759244054002
Material	High density foam with polyethylene stiffener; industrial nylon cover
Weight	Approx. 0.3 lb
Country of Origin	USA
Package Contents	(1) Belt Buddy Pad

Sizing Guide

Important: Skip the Pants Size!

Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.

Measuring Your Belt Size:

The most accurate method is to measure a tool belt you already wear regularly. Here's how:

Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
Match your measurement to the sizing chart below.

Don't Have a Tool Belt Yet?

No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.

Sizing Tips:

Between sizes? Go with the larger option for optimal comfort.
These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
Always measure over your full work outfit – tool belts sit over everything you're wearing.

Sizing Chart:

Small: 34" (86.5 cm)
Medium: 37" (94 cm)
Large: 41" (104.5 cm)
X-Large: 45" (114.5 cm)
XX-Large: 49" (124.5 cm)
XXX-Large: 53" (135 cm)

Why Your Pants Size Doesn't Work:

Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
Tool belts go over your entire outfit, not just your waist.
Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.

Measuring Instructions:

You'll need a flexible tape measure and your tool belt.
With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
Round that measurement up to the nearest whole number.

Sizing Chart:

Small: ≤ 38" (96.5 cm)
Standard: 38-48" (96.5 - 122 cm)
Extension Kit: > 48" (122 cm)

The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:

Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.

Installation Tips:

Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
Make sure the hammer head will be easily accessible when you reach for it.
Consider your dominant hand and work style when choosing placement.
For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.

What Are the Benefits?

No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
Quick Access: Positions hammer at your fingertips for one-handed retrieval
Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement

How Long Will It Last?

Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.

Can I Remove It Later?

No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.

Do I Need Special Tools?

You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.