Occidental Leather
Occidental Leather Black Nylon Suspenders 9020B
$41.90
Unit price perOccidental Leather 9020B Description
Serious nylon suspenders designed to support pants or a loaded tool belt. Extra heavy 2 in wide, non-stretch straps adjust in front and rear with a durable harness leather back spreader and heavy-duty clamps.
Occidental Leather 9020B Includes
- (1) 9020B Nylon Suspenders
Occidental Leather 9020B Features
- Extra heavy 2 in wide nylon straps
- Front and rear adjustment; non-stretch for secure support
- Heavy harness leather rear spreader for durability
- Quality super heavy clamps attach to belt or waistband
- Black color
Occidental Leather 9020B Applications
- Support and stabilize tool belts during daily work
- Hold up pants securely on the jobsite
- Distribute load weight to reduce hip and lower back strain
- Clip to work belts or waistband using heavy-duty clamps
Occidental Leather 9020B Installation Overview
- Attach each clamp to your waistband or tool belt evenly spaced.
- Place straps over shoulders with the leather spreader centered on your back.
- Adjust front and rear sliders for a comfortable, balanced fit.
- Confirm clamps are secure and straps are not twisted before use.
Occidental Leather 9020B Specifications
| Color | Black |
| Strap Width | 2 in |
| Strap Material | Nylon |
| Rear Spreader | Harness leather |
| Adjustability | Front and rear; non-stretch straps |
| Attachment | Heavy-duty clamps |
| UPC | 759244049107 |
Occidental Leather Black Nylon Suspenders 9020B
Black nylon suspenders with 2 in straps
✓ 2 in wide straps for firm support
✓ Non-stretch nylon with front and rear adjustment
✓ Harness leather back spreader for durability
✓ Heavy-duty clamps attach to belt or waistband
✓ Made in USA
$41.90
Unit price per1 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Nylon and Leather Care
- Brush off dirt and wipe nylon straps with a damp cloth; air dry.
- Clean leather spreader with a slightly damp cloth; condition periodically with a leather conditioner.
- Avoid bleach, solvents, and machine washing or drying.
- Store dry, away from direct sunlight and excessive heat.
- Inspect clamps and stitching regularly and remove grit from hardware.
- 2 in Wide Straps provide strong, stable support
- Non-stretch, adjustable design with front and rear sliders
- Harness leather rear spreader adds durability and comfort
- Heavy-duty clamps attach to belt or waistband
- Color: Black
- Strap Material: Nylon
- UPC: 759244049107
More About Occidental Leather Black Nylon Suspenders 9020B
Occidental Leather 9020B Description
Serious nylon suspenders designed to support pants or a loaded tool belt. Extra heavy 2 in wide, non-stretch straps adjust in front and rear with a durable harness leather back spreader and heavy-duty clamps.
Occidental Leather 9020B Includes
- (1) 9020B Nylon Suspenders
Occidental Leather 9020B Features
- Extra heavy 2 in wide nylon straps
- Front and rear adjustment; non-stretch for secure support
- Heavy harness leather rear spreader for durability
- Quality super heavy clamps attach to belt or waistband
- Black color
Occidental Leather 9020B Applications
- Support and stabilize tool belts during daily work
- Hold up pants securely on the jobsite
- Distribute load weight to reduce hip and lower back strain
- Clip to work belts or waistband using heavy-duty clamps
Occidental Leather 9020B Installation Overview
- Attach each clamp to your waistband or tool belt evenly spaced.
- Place straps over shoulders with the leather spreader centered on your back.
- Adjust front and rear sliders for a comfortable, balanced fit.
- Confirm clamps are secure and straps are not twisted before use.
Occidental Leather 9020B Specifications
| Color | Black |
| Strap Width | 2 in |
| Strap Material | Nylon |
| Rear Spreader | Harness leather |
| Adjustability | Front and rear; non-stretch straps |
| Attachment | Heavy-duty clamps |
| UPC | 759244049107 |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
