Occidental Leather
Occidental Leather 2580LH Left Handed SuspendaVest OxyLight Package
$433.90
Unit price perOccidental Leather 2580LH Description
A left handed SuspendaVest OxyLight package designed for comfort and organization. The system pairs the 2500LH SuspendaVest with the B8064LH fastener bag and B8017LH tool bag. Quick disconnect 3 in leather belting accepts tool bags with tunnel loops up to 8.5 in. Fully adjustable straps and padded shoulders distribute weight evenly, reduce fatigue, and keep 36 pockets and holders within easy reach.
Occidental Leather 2580LH Includes
- (1) Vest
- (2) Pouches
Occidental Leather 2580LH Features
- Wide padded shoulder support lined with Dri Lex for moisture management
- Fully adjustable straps for a comfortable fit on most builders
- Balanced load carry to reduce strain and lower back fatigue
- 36 pockets and holders keep essential tools accessible
- Quick release chest buckle and heavy duty D ring for hanging storage
Occidental Leather 2580LH Applications
- Framing tasks needing high capacity tool access
- Electrical work with balanced weight distribution
- Concrete forming and layout
- Trim and finish work in tight spaces
Occidental Leather 2580LH Installation Overview
- Adjust shoulder straps and chest buckle for a secure, comfortable fit.
- Attach B8064LH and B8017LH bags to the 3 in leather belting.
- Ensure tunnel loop attachments are seated; tighten as needed.
- Load tools into the 36 pockets and holders to balance weight.
- Use the D ring for hanging storage when removing the vest.
Occidental Leather 2580LH Specifications
| Pockets and Holders | 36 |
| Size | One size fits most |
| Handedness | Left handed; right handed available as 2580 |
| Belt Width | 3 in leather belting |
| Tool Bag Compatibility | Tunnel loops up to 8.5 in |
| Weight | 5.7 lb |
| Patent | US D531,401 S |
Occidental Leather 2580LH Left Handed SuspendaVest OxyLight Package
Left handed SuspendaVest OxyLight set
✓ Left handed layout vest system
✓ Padded Dri Lex shoulders for comfort
✓ Even weight distribution reduces fatigue
✓ 36 pockets and holders keep tools handy
✓ Made in USA
$433.90
Unit price per4 low in stock
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Leather and Nylon Gear Care
- Brush off dust daily; wipe with a damp cloth and air dry.
- Clean heavy grime with mild soap and water; avoid harsh chemicals.
- Condition leather periodically with a quality leather conditioner; do not soak.
- Keep away from prolonged direct sunlight and extreme heat.
- Store dry in a cool place; do not compress loaded pockets to prevent deformation.
- Padded Dri Lex shoulders for comfort and moisture control
- Fully adjustable straps fit most builders
- Even load distribution reduces lower back strain
- Quick disconnect belting accepts tunnel loops up to 8.5 in
- Heavy duty D ring for hanging storage
- Pockets and Holders: 36
- Size: One size fits most
- Weight: 5.7 lb
- Patent: US D531,401 S
$433.90
Unit price perMore About Occidental Leather 2580LH Left Handed SuspendaVest OxyLight Package
Occidental Leather 2580LH Description
A left handed SuspendaVest OxyLight package designed for comfort and organization. The system pairs the 2500LH SuspendaVest with the B8064LH fastener bag and B8017LH tool bag. Quick disconnect 3 in leather belting accepts tool bags with tunnel loops up to 8.5 in. Fully adjustable straps and padded shoulders distribute weight evenly, reduce fatigue, and keep 36 pockets and holders within easy reach.
Occidental Leather 2580LH Includes
- (1) Vest
- (2) Pouches
Occidental Leather 2580LH Features
- Wide padded shoulder support lined with Dri Lex for moisture management
- Fully adjustable straps for a comfortable fit on most builders
- Balanced load carry to reduce strain and lower back fatigue
- 36 pockets and holders keep essential tools accessible
- Quick release chest buckle and heavy duty D ring for hanging storage
Occidental Leather 2580LH Applications
- Framing tasks needing high capacity tool access
- Electrical work with balanced weight distribution
- Concrete forming and layout
- Trim and finish work in tight spaces
Occidental Leather 2580LH Installation Overview
- Adjust shoulder straps and chest buckle for a secure, comfortable fit.
- Attach B8064LH and B8017LH bags to the 3 in leather belting.
- Ensure tunnel loop attachments are seated; tighten as needed.
- Load tools into the 36 pockets and holders to balance weight.
- Use the D ring for hanging storage when removing the vest.
Occidental Leather 2580LH Specifications
| Pockets and Holders | 36 |
| Size | One size fits most |
| Handedness | Left handed; right handed available as 2580 |
| Belt Width | 3 in leather belting |
| Tool Bag Compatibility | Tunnel loops up to 8.5 in |
| Weight | 5.7 lb |
| Patent | US D531,401 S |
Sizing Guide
Important: Skip the Pants Size!
Forget your pants waist measurement – it won't give you the right fit. Here's the proper way to size your tool belt.
Measuring Your Belt Size:
The most accurate method is to measure a tool belt you already wear regularly. Here's how:
- Put on your typical work clothes (pants, regular belt, shirt, hoodie – whatever you normally wear on the job).
- Wear your current tool belt at your usual position and fasten it to your preferred comfort level. Take note of which hole you're using.
- Remove the belt and lay it flat on a surface. Measure from the buckle's end to the hole you were using. This measurement is your true belt size.
- Match your measurement to the sizing chart below.
Don't Have a Tool Belt Yet?
No problem – borrow one from a colleague for measuring, or use a cloth measuring tape or rope around your waist where you'd wear the belt (over your work clothes). Measure where it feels comfortable.
Sizing Tips:
- Between sizes? Go with the larger option for optimal comfort.
- These belts are engineered to fasten at the center hole, giving you 4 inches of adjustment in either direction (9 holes total spanning 8 inches).
- Always measure over your full work outfit – tool belts sit over everything you're wearing.
Sizing Chart:
- Small: 34" (86.5 cm)
- Medium: 37" (94 cm)
- Large: 41" (104.5 cm)
- X-Large: 45" (114.5 cm)
- XX-Large: 49" (124.5 cm)
- XXX-Large: 53" (135 cm)
Why Your Pants Size Doesn't Work:
- Pants use stretchy fabrics that conform to your body; our leather belts mold over time but aren't elastic.
- Clothing sizes are inconsistent – a size 36 in slim fit differs significantly from a relaxed 36.
- Tool belts go over your entire outfit, not just your waist.
- Most people need a belt 3-7 inches larger than their pants waist, depending on wear style and layering.
Measuring Instructions:
- You'll need a flexible tape measure and your tool belt.
- With your tool belt on, measure from the top of your toolbelt where the suspenders will attach in the back.
- Bring the tape measure diagonally up and over the opposite shoulder to the top of the belt where suspenders will attach in the front.
- Round that measurement up to the nearest whole number.
Sizing Chart:
- Small: ≤ 38" (96.5 cm)
- Standard: 38-48" (96.5 - 122 cm)
- Extension Kit: > 48" (122 cm)
The installation process involves riveting the hammer sleeve directly to your chosen pouch or rig:
- Position the Sleeve: Determine the optimal placement on your pouch or rig. The sleeve should be positioned where you want to carry your hammer typically behind or on the side of your main pouch for easy access.
- Mark Your Holes: Align the hammer sleeve with your pouch and mark where the rivet holes will go through both the sleeve and your pouch/rig.
- Install the Copper Rivets: Using the included copper rivets, secure the hammer sleeve to your pouch. The rivets provide a permanent, durable attachment that will withstand years of daily use.
- Check the Fit: Once installed, test your hammer's fit. It should slide in and out easily while remaining secure during movement.
Installation Tips:
- Take your time positioning the sleeve before making permanent holes - measure twice, drill once.
- The sleeve is designed to tuck your hammer behind your pouch, keeping it close to your body and out of the way.
- Make sure the hammer head will be easily accessible when you reach for it.
- Consider your dominant hand and work style when choosing placement.
- For detailed visual guidance, refer to the installation video provided with your kit or available on Occidental Leather's website.
What Are the Benefits?
- No More Leg Slapping: Keeps your hammer from swinging and hitting your legs
- Quick Access: Positions hammer at your fingertips for one-handed retrieval
- Compact Carry: Tucks hammer close to your body, ideal for working in tight spaces
- Protects Your Work: Prevents hammer from damaging freshly installed materials like cabinets, drywall, or trim
- High Mobility: Perfect for framing, roofing, finish carpentry, and other jobs requiring freedom of movement
How Long Will It Last?
Made from 8 oz leather and secured with copper rivets, the Occidental Hammer Sleeve is built to endure years of daily jobsite use when properly maintained.
Can I Remove It Later?
No - the copper rivet installation is permanent. Choose your placement carefully before installation. This permanent attachment ensures maximum durability and reliability on the job.
Do I Need Special Tools?
You'll need basic rivet-setting tools to install the copper rivets. If you're not familiar with setting rivets, consider having a leather worker or experienced colleague help with the installation, or watch the provided video tutorial first.
Top Sellers
Our Highest Quality Products
